You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. In Situ Inspection of Additive Manufactured Metallic Parts Using Laser Ultrasonics

    SBC: INTELLIGENT OPTICAL SYSTEMS, INC.            Topic: N15AT008

    Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

    STTR Phase II 2016 Department of DefenseNavy
  2. Fuel Efficient Nanofluid Gear Oil

    SBC: Pixelligent Technologies, LLC            Topic: A15AT018

    Improving vehicle fuel efficiency for the military can significantly reduce costs and reduce risk to solider safety. One way to improve vehicle efficiency for new and legacy vehicles is to reduce frictional loses in the drivetrain through use of lower viscosity lubricants. However, this comes with the risk of reducing durability of drivetrain components through increased wear, pitting and scuffing ...

    STTR Phase II 2018 Department of DefenseArmy
  3. Broad Spectrum Optical Property Characterization

    SBC: SPECTRAL MOLECULAR IMAGING, INC.            Topic: AF15AT12

    Liquid Crystal Arrayed Microcavities (LCAM) are a new hyperspectral technology initiated by collaboration among Spectral Molecular Imaging, Advanced Microcavity Sensors and Montana State University Spectrum Laboratory.At the core of this revolutionary technology lie picoliter volume optical cavities that exploit liquid crystal birefringence for tuning an effective cavity length.During a Phase I on ...

    STTR Phase II 2016 Department of DefenseAir Force
  4. Reverberation Mitigation of Speech

    SBC: MINERVA SYSTEMS & TECHNOLOGIES LLC            Topic: AF15AT17

    Automatic speech recognition (ASR) technology is in wide use today and has been successfully integrated into a number of applications. Although there are also many potential applications for automatic speaker identification (SID), SID accuracy rates are generally not sufficient for widespread use in practical applications. For high accuracy ASR and SID, the microphone must be located near the talk ...

    STTR Phase II 2016 Department of DefenseAir Force
  5. Plasma Generator for Controlled Enhancement of the Ionosphere

    SBC: Enig Associates, Inc.            Topic: AF15AT22

    Enig Associates, Inc., a small business providing advanced modeling and simulation capabilities to the DoD and DoE, is proposing an innovative and novel electrical approach, using explosive-driven flux compression generators to Joule heat light metal load in sub millisecond time scale from a solid metal state to a first ionization plasma state going through multi-phase transitions to generate an a ...

    STTR Phase II 2016 Department of DefenseAir Force
  6. High Fidelity Rotorcraft Towing Modeling and Simulation with Towed Magnetic Anomaly Detection System

    SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC.            Topic: N15AT009

    Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...

    STTR Phase II 2016 Department of DefenseNavy
  7. Human Performance Optimization: Ketone Esters for Optimization of Operator Performance in Hypoxia

    SBC: HVMN Inc.            Topic: SOCOM17C001

    In the setting of altitude-induced hypoxia, operator cognitive capacity degrades and can compromise both individual and team performance. This degradation is linked to falling brain energy (ATP) levels and an increased reliance on anaerobic energy production from glucose. Ketone bodies are the evolutionary alternative substrate to glucose for brain metabolic requirements; previous studies have sho ...

    STTR Phase I 2018 Department of DefenseSpecial Operations Command
  8. Inhibiting Prolyl Hydroxylase to Mimic Natural Acclimatization to High Altitude to Improve Warfighter Performance at High Altitude

    SBC: Research Logistics Company            Topic: SOCOM17C001

    Acclimatization is the long-term adjustment that humans experience when exposed for weeks or months to high altitude. Acclimatization is important in this context because a warfighter who is acclimatized to high altitude is immune to high altitude illness, has superior work capacity, and has cognitive function approaching that found at sea level. In other words, the acclimatized warfighter is opti ...

    STTR Phase I 2018 Department of DefenseSpecial Operations Command
  9. Disposal of Aqueous Film-Forming Foam using Hydrodynamic Cavitation

    SBC: DYNAFLOW, INC.            Topic: AF17BT001

    The widespread use of Aqueous Film Forming Foams (AFFF) at DOD facilities for firefighting, training, and fire suppression systems has resulted in numerous contamination sites. The perfluoroalkyl (PFA) compounds used in the AFFF, such as perfluoroalkyl sulfonates (PFOS) and perfluoroalkyl carboxylic acids (PFOA) are extremely stable in the environment and have been shown to be resistant to typical ...

    STTR Phase I 2018 Department of DefenseAir Force
  10. Concrete Materials Characterization (COMAC)

    SBC: Luminit LLC            Topic: N18AT006

    To meet the U.S. Navy, specifically PMA-201, need for nondestructive evaluation (NDE) of concrete, including evaluating its strength, material properties, and damage localization, Luminit, LLC, and Southern Illinois University (SIU) propose to develop a novel Concrete Materials Characterization (COMAC) system, combining several methods of concrete characterization into a single sensor/software com ...

    STTR Phase I 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government