You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Low-Defect GeSn and SiGeSn for Integrated High-Performance SWIR and MWIR Optoelectronics

    SBC: FREEDOM PHOTONICS LLC            Topic: AF16AT28

    Advanced imaging techniques and, novel intelligence, surveillance and reconnaissance (ISR) methods are of great interest to the U.S. Air Force and other Department of Defense (DoD) agencies, but associated high-costs of III-V and II-VI MWIR and SWIR materials prohibit their practical widespread deployment and integration with other optoelectronic devices. In this program, we intend to investigate ...

    STTR Phase II 2018 Department of DefenseAir Force
  2. Infrared Micro-Laser Arrays for Target Image Projection

    SBC: ATTOLLO ENGINEERING, LLC            Topic: AF16AT22

    Current scene projection hardware is challenged to simultaneously meet the requirements for high peak temperature (> 2000K), high resolution (2Kx2K), response time < 4 ms, cryogenic and temporally uniform photon flux. MEMS, Resistor arrays, liquid crystals, and photonic crystals all suffer in one or more areas. MEMS suffer from flicker and low dynamic range. Resistor arrays suffer from low frame r ...

    STTR Phase II 2018 Department of DefenseAir Force
  3. Man-Portable and Fieldable Mass Spectrometer for Sequencing Peptides

    SBC: BAYSPEC, INC.            Topic: A16AT012

    BaySpec Inc., in collaboration with Pacific Northwest National Laboratory, proposes to develop a new portable multi-order mass spectrometry system that can sequence peptides derived from biological agents including bacteria, viruses, and toxins. During Phase I stage, a fully functional prototype instrument, based on an innovative design concept, was successfully built and the performance evaluatio ...

    STTR Phase II 2018 Department of DefenseArmy
  4. Rydberg-atom RF Sensors for Direction Finding and Geolocation

    SBC: COLDQUANTA, INC.            Topic: AF17AT028

    ColdQuanta is partnering with Dr. Zoya Popovic at the University of Colorado, Boulder, to develop a three-dimensional quantum-enhanced radio-frequency (RF) signal sensor and direction finder. Our approach combine Rydberg-atom-based RF electrometry and discrete lens arrays (DLAs) of planar antennas. The DLA will serve as a Fourier optic for an incident wave, and a Rydberg-atom RF electrometer will ...

    STTR Phase I 2018 Department of DefenseAir Force
  5. Fuel Efficient Nanofluid Gear Oil

    SBC: Pixelligent Technologies, LLC            Topic: A15AT018

    Improving vehicle fuel efficiency for the military can significantly reduce costs and reduce risk to solider safety. One way to improve vehicle efficiency for new and legacy vehicles is to reduce frictional loses in the drivetrain through use of lower viscosity lubricants. However, this comes with the risk of reducing durability of drivetrain components through increased wear, pitting and scuffing ...

    STTR Phase II 2018 Department of DefenseArmy
  6. Technologies to Target Circadian Rhythm Disruption in PTSD

    SBC: Cognionics, Inc.            Topic: A16AT014

    This STTR project will develop a wearable sensor suite for accurate assessment of circadian and sleep rhythms with the goal to identify abnormalities in PTSD patients and enable personalized therapy to help restore their normal functional and quality of life. Phase I has already demonstrated proof-of-principle hardware. The primary Phase II objective is to successfully carry out a human subjects s ...

    STTR Phase II 2018 Department of DefenseArmy
  7. Hypersonic Experimental Aerothermoelastic Test (HEAT)

    SBC: GLOBAL AEROSPACE CORPORATION            Topic: AF16AT24

    The U.S. Air Force is interested in developing hypersonic vehicles including reusable transport aircraft, cruise missiles, and unmanned systems. Hypersonic flight regimes result in multifaceted and very difficult design challenges that can be encapsulated into an aerothermoelastic problem, which is a complex interaction of structural, thermal, and aerodynamic mechanisms. When a flexible structural ...

    STTR Phase II 2018 Department of DefenseAir Force
  8. Three-Dimensional Density Imaging by Rayleigh Scattering

    SBC: METROLASER, INCORPORATED            Topic: AF16AT06

    A diagnostic is proposed for obtaining instantaneous three-dimensional volumetric distributions of density in a flow field at velocities ranging from subsonic to supersonic. Multiple Sheet Filtered Rayleigh Scattering (MSFRS) will be developed, which enables a series of two-dimensional images to be rapidly obtained making up a volumetric image while suppressing background scattering from wind tunn ...

    STTR Phase II 2018 Department of DefenseAir Force
  9. Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point ofCare Applications

    SBC: GENECAPTURE, INC.            Topic: CBD15C001

    GeneCapture, Inc. is proposing to develop a rapid in vitro diagnostic prototype using our patented molecular-based CAPTURE (ConfirmActive Pathogens Through Unamplified RNA Expression) assay. Based on the results and experience gained in our Phase I STTR contractHDTRA1-16C-0061: Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point of Care Applications, we p ...

    STTR Phase II 2018 Department of DefenseOffice for Chemical and Biological Defense
  10. In Situ Inspection of Additive Manufactured Metallic Parts Using Laser Ultrasonics

    SBC: INTELLIGENT OPTICAL SYSTEMS, INC.            Topic: N15AT008

    Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

    STTR Phase II 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government