You are here
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
SBC: SA PHOTONICS, LLC Topic: AF15AT13
ABSTRACT: Digital binocular helmet-mounted display (HMD) systems are now available that allow high resolution wide field-of-view (WFOV) digital imagery to be displayed on high resolution microdisplays. These digital HMD systems require a low-latency embedded vision processor (LLEVS) capable of implementing the necessary image processing algorithms. An SA Photonics LLEVS will be implemented on next ...STTR Phase I 2015 Department of DefenseAir Force
SBC: NEXTGEN AERONAUTICS, INC. Topic: AF14AT01
Increasing system capabilities in terms of weapon systems, ISR payloads, GNC, etc., enabled by smaller and more capable electronics systems have led to a trend for overall size reduction in military aircraft. This has resulted in a reduction in the avail...STTR Phase II 2016 Department of DefenseAir Force
SBC: CFD RESEARCH CORPORATION Topic: DHP16A001
Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...STTR Phase I 2016 Department of DefenseDefense Health Agency
SBC: JEM ENGINEERING, LLC Topic: N16AT001
In our Phase I program, JEM and ASU will demonstrate a low cost manufacturing process to achieve the full theoretical hesitivity of a magnetic film that would enable greater effective hesitivity laminate. In Phase II we will develop a viable continuous process for two such materials to achieve light weight, low cost, and improved radiation efficiency; and we will seek to productize this process to ...STTR Phase I 2016 Department of DefenseNavy
SBC: POLARONYX INC Topic: N16AT004
This Navy STTR Phase I proposal presents an unprecedented NDI tool to quantify mechanical properties of metal parts made with laser additive manufacturing with material characteristics and process parameters. A fiber laser SAW and heterodyne detection is used with LIBS to study both in-process and post-process for both flat and shaped parts. It is the enabling technology for characterize the AM pa ...STTR Phase I 2016 Department of DefenseNavy
Quantifying Uncertainty in the Mechanical Performance of Additively Manufactured Parts Due to Material and Process VariationSBC: VEXTEC CORPORATION Topic: N16AT004
The Phase I objective is a proof of concept capability integrating process information, material properties and damage tolerance simulations into the Additive Manufacturing (AM) design certification process. VEXTEC has a toolbox of software and methods that consists of various software modules in multiple formats that are used to assess the durability of parts processed by traditional methods of c ...STTR Phase I 2016 Department of DefenseNavy
SBC: ACREE TECHNOLOGIES INCORPORATED Topic: N16AT005
The purpose of this project is to demonstrate the feasibility of using an innovative, durable, low friction, and non-toxic solid lubricant coating for foil air bearings for air cycle machines (ACM). Acrees coating provides superior wear characteristics at all temperatures and provides a substantial improvement over polyimide type coatings that are currently used on ACMs. The coating consists of tw ...STTR Phase I 2016 Department of DefenseNavy
SBC: IBC Materials & Technologies, LLC Topic: N16AT005
In this proposed SBIR program, IBC Materials & Technologies, in conjunction with our industry partner Mechanical Solutions, Inc. (MSI) and Texas A&M University, will leverage our knowledge and experience in the domain of industrial metallic coatings to develop a metallurgical coating solution for the Air Foil Bearing. IBC has deep expertise in a variety of industrial coating processes including mu ...STTR Phase I 2016 Department of DefenseNavy
SBC: TECHNOLOGY ASSESSMENT AND TRANSFER, INC. Topic: N16AT005
Technology Assessment and Transfer will demonstrate the potential of novel, low friction and low wear coatings that are capable of providing long term durability for air cycle machine foil bearings. A systematic approach with a high probability of success includes the following: unique low friction, wear resistant alloys and lubricating ceramic composites, magnetron sputtering, the ideal method fo ...STTR Phase I 2016 Department of DefenseNavy
SBC: ADA TECHNOLOGIES, INC. Topic: N16AT008
To meet Navy needs for high performance and safe lithium ion (Li-ion) batteries for naval aircraft, ADA Technologies Inc. (ADA) and its university collaborator propose to develop and optimize tailor designed nanoporous separators derived from functionalized block copolymers (polyolefins) with low cost precursors. The innovative strategy provides a powerful tool to allow exquisite tuning of perform ...STTR Phase I 2016 Department of DefenseNavy