Award Data

ABSTRACT: The hydrocarbon-fueled scramjet is capable of providing hypersonic air-breathing propulsion for high-speed applications. The effective operation of high-speed air-breathing engines (ram- and scram-jets) over a wide range of flow parameters (velocity and altitude) is one of the most technically difficult challenges in the design of hypersonic vehicles. The most promising approach to overc ...

ABSTRACT: Acumentrics, Wright State, and GoHypersonic are partnering to deliver a robust solution to the need for power generation for long duration hypersonic platforms. This solution considers not only the direct generation of power using a highly efficiency fuel cell package, but overall vehicle requirements. This work utilizes existing commercial technology in developing this unique solution. ...

ABSTRACT: The need for improved performance of liquid rocket engines requires efficient wall cooling technologies to mitigate high heat fluxes from hot combustion gases to the engine wall in the thrust chamber. High heat fluxes to the chamber liners can be overcome by fuel film cooling (FFC) of the inside chamber using the liquid propellant. Moreover, the thermal cracking of the fuel creates coke ...

ABSTRACT: In this project, IFT and its academic partner GMU developed an innovative Harness Enhanced Awareness for Radio Systems (HEARS) framework and technical underpinnings for DSA systems operating under conditions of imperfect knowledge, and used the framework to address challenging problems in satellite communication (SATCOM)DSA. As the logical core of the HEARS, Multi-Entity Bayesian Network ...

ABSTRACT: Exquadrum, Inc. proposes to develop an innovative multi-mode power generation system for hypersonic flight vehicles. This system produces the required power output that the flight vehicle demands, independent of the flight characteristics at the time. However, this system will work in conjunction with the propulsion system to augment the power generation capabilities. This is accomplishe ...

ABSTRACT: Enig Associates, Inc., a small business providing advanced modeling and simulation capabilities to the DoD and DoE, is proposing an innovative and novel electrical approach, using explosive-driven flux compression generators (FCG) to convert explosive chemical energy to electromagnetic energy with very high current output and superb energy conversion efficiency and then Joule heat light ...

ABSTRACT: An unseeded measurement technique is proposed for simultaneous spatially-resolved measurements of density, temperature, and velocity in hypersonic wind tunnel flows with the future potential for time-resolved measurement capability. A variant of filtered Rayleigh scattering (FRS) will be developed that takes advantage of unique monotonic relationships between molecular vapor cell filter ...

ABSTRACT: Future corrosion and wear protection of structural metals on on military aircraft and weapon systems will require advanced development of metallic and composite materials that are not restricted with respect to environment, safety and occupational health regulations. Conventional metallic alloys containing chromium, nickel, cobalt, and tungsten that have historically provided coating pro ...

Experimental data from a number of DoD supported research programs have indicated that electrical systems capable of producing highly repetitive bursts of high voltage, fast risetime pulses are a critical enabling technology for applications tied to nonequilibrium physical processes, such as combustion, boundary layer flow, and the generation of high power EM waves. Recognizing the important role ...

ABSTRACT: Wireless communications, radar, and biological detection require electronic components operating in the mm-wave and THz frequency ranges. GaAs metal semiconductor field effect transistor and nanoscale CMOS technologies have demonstrated high frequency capabilities and will likely benefit from future material systems and device architectures. The cost of exploring this wide design space c ...