Award Data

Acellent Technologies Inc. and Prof. F. G. Yuan at North Carolina State University (NCSU) are proposing to develop a Hybrid Distributed Sensor Network Integrated with Self-learning Symbiotic Diagnostic Algorithms and Models to determine materials state awareness and its evolution, including identification of precursors, detection of microdamages and flaws near high stress area or in a distributed ...

Yotta Navigation and The Ohio State University propose to develop a complete diver text messaging and locator system. The system will securely transmit preformatted and free-text messages, and will be able to accurately determine range and bearing, at distances of up to 1000 meters. This system consists of two major components. An ultrasonic cylindrical array, mounted on a swimmer delivery vehicl ...

Turbine efficiency improves with increased operating temperature. Consequently, the rim zone of disks operates at high temperatures where creep is the main concern. The bore and web zones operate at lower temperatures, where strength is the driving design criterion. Procedures to produce disks that can meet both demands include dual heat-treatment and hybrid disks. A thin transition zone forms in ...

A team led by NextGen Aeronautics Inc., and working with San Diego State University proposes the development of redundant wideband antennas that are embedded in composite armor structures The planned work builds upon the team’s extensive prior experience in conformal load-bearing antenna structures (CLAS), antenna design, and metamaterials. The proposed antenna is a combination of concepts that ...

The goal of the proposed research is the development of a high-volume, low-cost manufacturing along with a novel deposition process that enables fabrication of a structural-state electronic system-on film. This hybrid electronic system contains a multifunctional sensor suite that can measure a structure's static (such as deformation, stress and strain) and dynamic state (such as slow or under acce ...

The SOLUTE team’s Phase I technical approach consists primarily of a feasibility study assessing the viability of a Navy implementation of the algorithms, standards, and protocols that comprise Google's Wave technology. Of specific concern is Wave’s ability to handle varying bandwidth and DIL communications channels associated with Navy platforms. While computer science research in the field o ...

Electromagnetic launchers or rail guns are a key component of the Navy’s all-electric ship of the future, but they lack the durability required for repeated firings. TDA Research and the University of Nevada, Reno (UNR) are developing a tough, durable and conductive refractory metal coating that will protect the copper alloy conductors (rails) from the extreme heat and wear conditions inside the ...

Luna Innovations Incorporated and CURBC (Calspan – University of Buffalo Research Center) are proposing to develop miniature, high-speed, high-temperature, fiber-optic pressure sensors that will fill the void that currently exists between ground and flight test instrumentation. The sensors small size (ø 0.007”) and high-sensitivity (better than ±0.01 psi) combined with a high-speed fiber-op ...

The ever-decreasing size of the electronic microchips and the ever-increasing density of electronic components required to support future Air Force platforms are creating the problem of substantial localized heat generation that can impair component operation. State of the art thermal interface materials (TIMs), that are used to dissipate heat from the source to the spreader in a microchip, are se ...

The need for faster highly resolved solutions coupled with the advent of General Purpose Graphics Processing Unit (GPGPU) architectures and the development of GPGPU algorithms at the University of California, Davis present an opportunity that JMSI Inc. proposes to leverage by developing algorithmic and software solutions for GPGPUs in “Innovative CFD Algorithms, Libraries & Python Frameworks for ...