You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Experimentally Derived Scaling Laws from Spatiotemporally Resolved Measurements in High-Pressure Combustors

    SBC: SPECTRAL ENERGIES LLC            Topic: AF16AT15

    The objectives of this research effort are to experimentally derive the scaling laws up to 30 bar for key combustion species and temperature for reactions involving various hydrocarbon fuels in such a way so that the spatio-temporally resolved measurements would not be influenced by signal-degrading processes such as quenching, photolytic interference, Stark shift, and stimulated Raman. This build ...

    STTR Phase II 2017 Department of DefenseAir Force
  2. An Immersed Boundary Framework for Topology Optimization of Nonlinear Thermoelastic Structures with Internal Radiation

    SBC: SPECTRAL ENERGIES LLC            Topic: AF17AT015

    Thermoelastic structures poses a critical challenge to designers due to the inherent proportionality of the thermal loading on the structural thickness. This is further exacerbated by structural nonlinearity where any out-of-plane deformation further increases the effective loading on the structure. As a result of this, conventional design optimization procedures, which are typically based on line ...

    STTR Phase I 2017 Department of DefenseAir Force
  3. Advanced Morphing Moulage for Medical Training (AMM-MT)

    SBC: VCOM3D INC            Topic: DHA17A002

    For this Phase I SBIR proposal, Vcom3D proposes to design advanced medical moulage that accurately simulates the progression of an injury or pathology by morphing through a series of clinical states to enable learners to confirm the progression of the wound and to determine whether iatrogenic errors or pathologies occurred duing treatment. The physical morphing moulage may be applied to medical m ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
  4. Electrotextile Systems for Human Signatures Monitoring

    SBC: MANTEL TECHNOLOGIES, INC.            Topic: DHA17A001

    Investments by the Department of Defense (DOD) have led to the development and demonstration of electronic textiles capable of transforming traditional textile systems into wearable power and data systems. The Defense Health Agency (DHA) has identified an opportunity to leverage advancements in smart garment systems for military personnel to aid in the prediction in performance declines and healt ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
  5. Blended Reality Solution for Live, Virtual, and Constructive Field Training

    SBC: MIKE SUTTON CONSULTING INC            Topic: AF17AT011

    The proposed Small Business Technology Transfer (STTR) Phase I project will determine the technical feasibility and cost-effectiveness of utilizing emerging blended-reality technologies that enable interoperability with LVC simulations to create more effective and comprehensive Battlefield Airmen training environments. The proposed training technologies will be integrated across multiple platforms ...

    STTR Phase I 2017 Department of DefenseAir Force
  6. Target-In-The-Loop Sensing Suite for Long-Range Atmospheric Effects Characterization

    SBC: MV INNOVATIVE TECHNOLOGIES, LLC            Topic: AF17AT008

    This project offers a novel polychromatic target-in-the-loop atmospheric sensing (TILAS) concept for in situ characterization of the combined effects of atmospheric turbulence, refractivity, transmittance, and optical path difference (piston phase) over long-range, low elevation angle atmospheric paths. The proposed concept allows practical implementation of a modular compact TILAS atmospheric sen ...

    STTR Phase I 2017 Department of DefenseAir Force
  7. Development lightmap rendering technology to advance infrared simulation capabilities for training applications

    SBC: CORNERSTONE SOFTWARE SOLUTIONS INC            Topic: AF17AT012

    Recent technology advances have enabled the simulation community to achieve greater realism in virtual training environments. As new methods for synthetic image generation are developed, the lack of readily available supporting data to populate these specialized techniques limits their implementation. Currently the capability is not available to efficiently generate enhanced temporal energy maps ...

    STTR Phase I 2017 Department of DefenseAir Force
  8. Shear Stabilization Based Framework for the Failure Testing and Analysis of HSCs

    SBC: Roccor, LLC            Topic: AF17AT019

    This program will develop an engineering framework for the design and failure analysis of high strain composite (HSC) laminates. The program will first test several HSC laminates to generate a statistically significant dataset for flexural strength. Testing will be performed for short and long term stowage conditions. Initial and ultimate failure modes will be identified and documented using sever ...

    STTR Phase I 2017 Department of DefenseAir Force
  9. Development of Adaptive Closure Models for Large Eddy Simulations of Lean Blow-Out Conditions

    SBC: CFD RESEARCH CORPORATION            Topic: AF16AT14

    The objective of the proposed Phase II effort is to establish fundamental understanding of combustion-physical mechanisms leading to blowout, the critical evaluation of model limitations in predicting these blowout processes and the development of an improved combustion model to enable the prediction of lean blowout (LBO) in swirl-stabilized combustors. For this, high-resolution numerical simulati ...

    STTR Phase II 2017 Department of DefenseAir Force
  10. LWIR Fiber Bundle for Thermal Imaging in Gas Turbine Systems

    SBC: CREARE LLC            Topic: AF17AT016

    Improved temperature measurements of thermal barrier coating (TBC) components are needed for gas turbine research and development.Imaging pyrometry systems are preferred because they are non-contact and can measure the complex spatial temperature distribution on components.Measurement in the long-wave infrared (LWIR) band is required for accurate temperature measurements of modern TBCs.Fiber coupl ...

    STTR Phase I 2017 Department of DefenseAir Force
US Flag An Official Website of the United States Government