Award Data

Additive manufacturing is a disruptive new manufacturing paradigm that hold tremendous potential for creation of novel designs and introduction of novel new alloy systems. However, much of this potential remains unrealized due to a lack of robust material properties databases. Accurate calibration of materials models and robust part qualification and certification regimes both will require massive ...

Optically pumped magnetometers provide very high performance but they cost tens of thousands of dollars, and they are large and power hungry. Recently we successfully developed and commercialized laser pumped magnetometers with size, weight and power consumption that is an order of magnitude below current state-of-the-art without sacrificing performance. In this project, the focus will be on produ ...

Field programmable gate arrays (FPGAs) are becoming increasingly critical components in advanced electronic systems. However, limited research has been applied to identifying critical vulnerabilities that could be present in the designs deployed on these FPGAs. The risk is further increased by the use of 3rd party intellectual property in many designs.GrammaTech is proposing to develop a Trust ver ...

Vast amounts of impaired waters are produced in gas and oil wells. Energy-efficient desalination systems are needed to treat these waters to produce fresh water and concentrated brines. Mineral recovery systems can also yield valuable critical materials as byproducts. Savengy Technologies and University of Central Florida (UCF) will develop and commercialize an energy efficient system to treat sha ...

The broader impact/commercial potential of this Small Business Technology Transfer (STTR) project is to develop low-cost, high-performing feed additives for the swine feed market. Some of the current additives that supplement feed have detrimental side effects and/or made from raw materials that are considered toxic. Additives made from these toxic raw materials need to undergo substantial purific ...

The Navy has been developing superconducting systems, based on high-temperature superconductors (HTS), for future use on Navy ships. One of the challenges associated with superconducting magnets is the possibility of a quench, which is an event where a local hot spot develops within the superconductor that quickly spreads throughout the device, driving it into its normal and dissipative state. Sen ...

Vescent Photonics and MIT Lincoln Labs (MIT-LL) propose to develop a quantum-based vector magnetometer with low size, weight, power, and cost (SWaP+C) for Navy applications. The proposed system will rely on probing magnetically-sensitive, atomic-like transitions of nitrogen-vacancy (NV) centers in diamond to provide stable, high-bandwidth readout of the vector magnetic field with sub-picotesla sen ...

Metal Additive Manufacturing (AM) research has typically addressed understanding how to maximize performance for an AM material, taking into account microstructural anisotropy, residual stress, defects (such as pores and lack of fusion defects), and surface finish. Optimizing a part then requires significant post processing such as hot isostatic pressing (HIP), heat treatment and surface finishing ...

SUMMARY Despite significant advances in the surgical and medical management of congenital heart diseasecongenital cardiac anomalies remain a leading cause of death in the newborn periodMost severe forms of congenital heart disease require multiplestaged surgical interventionsA significant source of the heightened morbidity and mortality associated with these operations is the development of cardia ...

Summary Abstract Out of hospital cardiac arrest affects overpeople in the U Sannuallybut onlysurviveBystander cardiopulmonary resuscitationCPRimproves survivalbut rates of training in the U Sare lowIt is recently required by law inU Sstates that high school students learn CPRHoweverthere is great variability nationwide in howby whomand when students are taughtAdditionallycurrent methods of teachin ...