You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Additive Manufacturing of Metallic Materials for High Strain Rate Applications

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  2. Carbon nanotube coatings on electrochemical textured surfaces for advanced adsorptive baffles

    SBC: Faraday Technology, Inc.            Topic: MDA18T003

    This proposed STTR program addresses the challenge of developing advanced absorptive baffles to minimize stray and reflected light across the visible and infrared wavebands for exo-atmospheric optical sensors and seeker telescopes. To achieve this goal Faraday Technology and Pacific Northwest National Laboratory will develop electrochemically textured pyramidal surfaces with CNT black coatings as ...

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  3. High Efficiency Hypersonic Control Flap

    SBC: Exo-Atmospheric Technologies LLC            Topic: MDA18T002

    High G Aerodynamic Controls | Approved for Public Release 18-MDA-9707 (3 Jul 18)

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  4. New Integrated Total Design of Unmanned Underwater Vehicles (UUVs) Propulsion System Architecture for Higher Efficiency and Low Noise

    SBC: CONTINUOUS SOLUTIONS LLC            Topic: N18AT012

    In this proposal, a meta model-based scaling law will be used to represent each system component. A components meta model-based scaling law describes the tradeoffs between performance metrics for that component or subsystem as a function of its ratings in relation to the system. This greatly reduces the number of degrees of freedom for each component, and at the same time, retains the information ...

    STTR Phase I 2018 Department of DefenseNavy
  5. LeastProtocol: Minimizing Attack Surface by Removing Unwanted Protocol Features

    SBC: TRAIL OF BITS INC            Topic: N18AT018

    Standard protocols such as SSL, SSH, etc. are implemented as one-size-fits-all libraries. To maximize compatibility, these libraries implement rarely used features that increase attack surface. Examples include the SSL Heart Beat feature (HeartBleed) and weak SSH ciphers (LOGJAM).The Navy would like to reduce software attack surface by removing unused protocol features. Our proposal, LeastProtocol ...

    STTR Phase I 2018 Department of DefenseNavy
  6. High Throughput Static and Dynamic Testing of AM Materials for Uncertainty Quantification and Qualification

    SBC: MRL MATERIALS RESOURCES LLC            Topic: N18AT028

    Qualification of additively manufactured parts is hampered by the inherent uncetainty in properties due to heterogeneity in processing, microstructure, and defects. The proposed effort combines high-throughput testing of static and dynamic properties using tailored sample geometry, fixture design, and load application method with microstructure quantification and analysis. This system will drastic ...

    STTR Phase I 2018 Department of DefenseNavy
  7. Twiner

    SBC: SOAR TECHNOLOGY, LLC            Topic: N18AT019

    We currently lack the ability to holistically and autonomously look across all three layers of cyberspace (persona, logical and physical) and identify interesting patterns, which would give us an edge in understanding complex activities in and through cyberspace. To address this challenge, Soar Technology (SoarTech) and the GeorgiaTech Research Institute (GTRI) propose Twiner, an intelligent syste ...

    STTR Phase I 2018 Department of DefenseNavy
  8. Autonomous Navigation for the Hull Bug Ship Hull Grooming System

    SBC: SEAROBOTICS CORPORATION            Topic: N18AT020

    The underpinning science and sensing associated with autonomous navigation is advancing on numerous fronts. The navigation capability required for ship hull grooming in a low visibility environment is a natural application of this technology. Enormous benefit will be realized in the public and private sectors of the shipping industry. The economic and environmental impact realized using proactive ...

    STTR Phase I 2018 Department of DefenseNavy
  9. Control & Optimization of Multiple Illumination Characteristics (COMIC) of A Pulsed Fiber Array Laser System For Active Imaging Through Fog

    SBC: MV INNOVATIVE TECHNOLOGIES, LLC            Topic: N18AT021

    Degraded weather conditions particularly, dense maritime fog, reduces the US Fleet EO/IR systems ability to maintain situational awareness and detect/identify and track targets of interest. It is the Navys goal to develop an active EO/IR imaging system that jointly optimizes illumination source properties and implements advanced image processing to improve performance and operational range of curr ...

    STTR Phase I 2018 Department of DefenseNavy
  10. Laser Additive Manufacturing of Seven Thousand Series Aluminum Aircraft Components (LAM-STAAC)

    SBC: MV INNOVATIVE TECHNOLOGIES, LLC            Topic: N18AT005

    Alloys of aluminum in the 7000 series are known to have good weight, strength, and fatigue properties and are commonly used in Naval aircraft components. Recent manufacturing trends are increasingly focused on additive manufacturing (AM) methods as a way to reduce lead time, cost, and to improve part performance. Current additive manufacturing techniques are unable to fabricate parts in 7000 serie ...

    STTR Phase I 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government