Award Data

Current scene projection hardware is challenged to simultaneously meet the requirements for high peak temperature (> 2000K), high resolution (2Kx2K), response time < 4 ms, cryogenic and temporally uniform photon flux. MEMS, Resistor arrays, liquid cr...

Current scene projection hardware is challenged to simultaneously meet the requirements for high peak temperature (> 2000K), high resolution (2Kx2K), response time < 4 ms, cryogenic and temporally uniform photon flux. MEMS, Resistor arrays, liquid crystals, and photonic crystals all suffer in one or more areas. MEMS suffer from flicker and low dynamic range. Resistor arrays suffer from low frame r ...

This Phase I STTR proposal describes the development of a dual frequency millimeter-wave sun tracking radiometer designed to measure total atmospheric attenuation from ground level to the top of the atmosphere.The suns brightness temperature, which is on the order of 10,000K at millimeter-wavelengths, provides an ideal background reference allowing high dynamic range estimation of total atmospheri ...

ABSTRACT: Speech recognition technology is in wide use today and has been successfully integrated in a number of applications. Most of these applications require a microphone located near the talker. However, when a distant microphone is used where the speaker is at some distance from the microphone as in a hands-free communication, or in a meeting room, there is a major problem with the captured ...

Automatic speech recognition (ASR) technology is in wide use today and has been successfully integrated into a number of applications. Although there are also many potential applications for automatic speaker identification (SID), SID accuracy rates are generally not sufficient for widespread use in practical applications. For high accuracy ASR and SID, the microphone must be located near the talk ...

ABSTRACT: In this proposal, a team comprising ParaSim Inc. and the University of Utah will examine the feasibility of generating curved high-order meshes from hybrid linear meshes while retaining a given boundary geometry. Specifically, a preliminary design of a software package for creating high-order (up to 4th order and higher) hybrid-element meshes for complex geometries will be developed. S ...

Currently networks are not taking advantage of the inherent benefits of high multi-beam directional networking. For example, the current MADL implementation simply daisy chains the nodes in the network creating multiple single points of network failure (of course retaining self-healing properties.) The Fuse Directional Cross-Layer Networking Solution (DCLNS) optimized architecture features a robus ...

ABSTRACT: Two accelerating trends in military aircraft design and development are apparent: (1) increasing system capabilities in terms of weapon systems, ISR payloads, guidance, navigation and control (GNC), etc., enabled by ever-smaller and evermore capable electronics; and (2) reduction in overall size and available space for auxiliary equipment (and associated wiring, etc.) to measure and asse ...

Increasing system capabilities in terms of weapon systems, ISR payloads, GNC, etc., enabled by smaller and more capable electronics systems have led to a trend for overall size reduction in military aircraft. This has resulted in a reduction in the avail...

ABSTRACT: This effort is a close collaboration between RMD and Alfred University. Our goal is to develop a process for producing optical ceramics with properties approaching or exceeding single crystals. Ceramic processing can provide enhanced performance, lower cost, higher yield, relaxed constraints on size and shape, and materials that are difficult or impossible to grow as crystals. We will ...