You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Resilient Directional Mesh Enhanced Tactical Airborne Networks

    SBC: FIRST RF CORPORATION            Topic: AF17BT003

    FIRST RF will lead the Phase II effort and will leverage the system architecture of the MAINLINE system and integrate multifunctional SiGe integrated circuits (ICs) developed by The University of California San Diego under the supervision of Prof. Gabriel Rebeiz. The SiGe devices developed during the Phase II effort will significantly reduce the power requirements of the MAINLINE system allowing f ...

    STTR Phase II 2019 Department of DefenseAir Force
  2. Two-color Infrared Laser Arrays for Scene Projection

    SBC: ATTOLLO ENGINEERING LLC            Topic: A17AT018

    Current scene projection hardware is challenged to simultaneously meet the requirements for high peak temperature (> 2000K), high resolution (> 1Kx1K), response time < 1 ms, cryogenic and temporally uniform photon flux. MEMS, Resistor arrays, liquid crystals, and photonic crystals all suffer in one or more areas. MEMS suffer from flicker and low dynamic range. Resistor arrays suffer from low frame ...

    STTR Phase II 2019 Department of DefenseAir Force
  3. Mission and Information Assurance through Cyber Atomics

    SBC: SECURBORATION, INC.            Topic: AF17BT004

    Cyber Risk Assessments for Threatened Environments (CRATE) is a system that produces actionable, mission-level alerts when anomalous behaviors indicative of cyber-attack are discovered within deployed mission-critical cyber-systems. CRATE is particularly relevant to deployment scenarios involving third-party infrastructure, such as deployment to a Platform as a Service (PaaS) provider or other clo ...

    STTR Phase II 2019 Department of DefenseAir Force
  4. Multiphysics Modeling of Dynamic Combustion Processes Using Pareto-Efficient Combustion Framework

    SBC: STREAMLINE NUMERICS INC            Topic: AF18BT010

    The objective is to develop zonal multi-physics capability for turbulent combustion simulations. The foundation of the proposed work is a novel Pareto-Efficient Combustion (PEC) framework for fidelity-adaptive combustion modeling. The PEC model utilizes a combustion submodel assignment, combining the low-cost flamelet-based models with the more expensive finite rate chemistry models where necessar ...

    STTR Phase I 2019 Department of DefenseAir Force
  5. Holistic Interoperable Directional Data Enhancement Network

    SBC: FUSE INTEGRATION, INC.            Topic: AF17BT003

    Currently fielded multi-beam CDL systems have been developed in an ad-hoc manner consisting of a collection of poorly integrated off the shelf technologies where controllers, radios, routers, firewalls, encryptors, and antennas are bolted together to reduce time to field. Proprietary API’s, electrical interfaces, and hardware interfaces impede the success of the approach and result in a sub ...

    STTR Phase II 2019 Department of DefenseAir Force
  6. Multi-Functional Nanotube-Based Sensor Array for Detecting Blood Coagulation Defects

    SBC: INNOSENSE CORPORATION            Topic: DHA19A001

    Defense Health Agency (DHA) is seeking a multi-functional diagnostic to determine blood coagulopathy in real time at point-of-care (POC). Blood coagulopathy, resulting in uncontrolled bleeding, is implicated in 80% of operating room deaths and 50% of trau

    STTR Phase I 2019 Department of DefenseDefense Health Agency
  7. Nanomaterials-Enabled Electrochromic Eye Protection Device

    SBC: INNOSENSE CORPORATION            Topic: AF18BT003

    This project will address the U.S. Air Force needs for single-piece, electronically dimmable eye protection device (EDEPD). In Phase I, InnoSense LLC (ISL) will demonstrate feasibility of the approach by incorporating electrochromic layer on curved polycarbonate substrates. Phase I tests will include optical and physical characterizations regarding transmission range, switching speed, haze, unifor ...

    STTR Phase I 2019 Department of DefenseAir Force
  8. Adaptive and Smart Materials for Advanced Manufacturing Methods

    SBC: NEXTGEN AERONAUTICS, INC.            Topic: AF17AT018

    The focus of this STTR program is the development and maturation of a novel, room-temperature process to fabricate multi-layer metal-polymer (including PVDF and other smart materials) composites in an additive approach. This overcomes the limitation arising from the large temperature difference between metal and polymer manufacturing processes, and presents a new technology for additive manufactur ...

    STTR Phase II 2019 Department of DefenseAir Force
  9. Open Call for Science and Technology Created by Early-Stage (e.g. University) Teams

    SBC: EXOSONIC, INC.            Topic: AF19BT001

    Exosonic is developing a quiet Mach 1.8, 4500 nmi range supersonic civil aircraft that uses aerodynamic shaping techniques to mute its sonic boom. Exosonic is teamed up with Stanford University Prof. Juan Alonso's Aerospace Design Lab to apply the lab's low boom shape optimization tools to design this aircraft to meet future low-boom regulatory standards. The aircraft's primary customers are comme ...

    STTR Phase I 2019 Department of DefenseAir Force
  10. Toolset For Prediction of Carbon-Carbon Aeroshell Properties Based On Constituent Materials And Manufacturing Process Parameters

    SBC: ATA ENGINEERING, INC.            Topic: AF19AT021

    Carbon-carbon (C-C) composites are used in the fabrication of aeroshells and thermal protection systems (TPS) in hypersonic and atmospheric reentry applications because they maintain their strength at elevated temperatures and have desirable thermal conductivity properties. Although these materials have been used in mission-critical components for decades, the effects of variations in processing m ...

    STTR Phase I 2019 Department of DefenseAir Force
US Flag An Official Website of the United States Government