Award Data

This proposal will outline a bi-directional software defined Free Space Optics (FSO) laser communications testbed with flexible optical elements and reprogrammable waveform and signal processing elements. Vulcan Wireless Inc. currently manufacturers a 1550nm, eye safe, software defined Laser Communications Testbed MD-LC-1 and will use this as a basis for the Phase 1 effort. We will also be teaming ...

Current scene projection hardware is challenged to simultaneously meet the requirements for high peak temperature (> 2000K), high resolution (> 1Kx1K), response time < 1 ms, cryogenic and temporally uniform photon flux. MEMS, Resistor arrays, liquid crystals, and photonic crystals all suffer in one or more areas. MEMS suffer from flicker and low dynamic range. Resistor arrays suffer from low frame ...

Current fielded sensor protection is limited to fixed wavelength filters. Broadband filters designed to circumvent multi-wavelength laser threats are plagued by low transmittance, which degrades the sensitivity and performance of the sensor. Future warfighter threats include frequency agile lasers and thus have the potential of defeating fixed filters. Self-activating (passive) devices where prote ...

The development and implementation of new damage morphology models for concrete materials is critical to understanding their dynamic behavior during severe shock loading environments. Current constitutive models of conventional strength concretes do not accurately represent the behavioral characteristics of new ultra-high strength concretes because of differences in damage mechanisms during failur ...

High-pressure turbulent combustion occurs in many combustion devices critical to the Air Force. Notwithstanding significant progress in computational modeling of these devices; several challenges have remained. A fundamental challenge is identification of reaction pathways and reactions in small molecule foundational chemical kinetics requiring improvements under these high-pressure turbulent cond ...

FIRST RF will lead the Phase II effort and will leverage the system architecture of the MAINLINE system and integrate multifunctional SiGe integrated circuits (ICs) developed by The University of California San Diego under the supervision of Prof. Gabriel Rebeiz. The SiGe devices developed during the Phase II effort will significantly reduce the power requirements of the MAINLINE system allowing f ...

Currently fielded multi-beam CDL systems have been developed in an ad-hoc manner consisting of a collection of poorly integrated off the shelf technologies where controllers, radios, routers, firewalls, encryptors, and antennas are bolted together to reduce time to field. Proprietary API’s, electrical interfaces, and hardware interfaces impede the success of the approach and result in a sub ...

The focus of this STTR program is the development and maturation of a novel, room-temperature process to fabricate multi-layer metal-polymer (including PVDF and other smart materials) composites in an additive approach. This overcomes the limitation arising from the large temperature difference between metal and polymer manufacturing processes, and presents a new technology for additive manufactur ...

In this proposal, Bluecom Systems proposes to develop a framework in designing and manufacturing smart materials that can be used as adaptive radiating structures to operate at different frequencies, with different radiation patterns, and achieve polarization diversity. The solution proposed, based on optically pixilated Silicon or GaAs surfaces, can be used as reflective surfaces for reconfigurab ...

Over the past 2 years, Roccor has successfully qualified and delivered High Strain Composite (HSC) products for space-flight customers including, 1) RF-Furlable boom, 2) a furlable-antenna system; and is currently qualifying HSC products for space-flight customers including 3) an FCC certified deorbit device, and 4) a solar array deployment system. Three of these missions will be launched in 2018. ...