List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Two color, Bias Selectable, HgCdTe Airborne Multispectrum Sensor Arrays

    SBC: Spire Corporation            Topic: N/A

    Spire proposes to design a multispectral infrared camera basaed on a two-color bias-selectable focal plane array fabricated in HgCdTe prepared by MOCVD. The proposed detector is a two terminal, HgCdTe, n-p-n heterostructure which can be thought of as two back-to-back diodes. Through proper selection of the materials composition and application of an appropriate bias, the device can be made sensiti ...

    SBIR Phase I 1994 Department of DefenseNavy
  2. ACTIVE NOISE CONTROL

    SBC: SVS R&D SYSTEMS, INC.            Topic: N/A

    THE PROBLEMS OF ATTENUATING DUCTED NOISE AND DISTRIBUTED NOISE ARE ADDRESSED USING ACTIVE NOISE CANCELLATION TECHNIQUES. FOR DUCTED NOISE, A COMBINATION OF COMMERCIAL ANC EQUIPMENT WITH LOW PRESSURE DROP MUFFLERS IN AN SVS PROPRIETARY CONFIGURATION WILL BE EXAMINED. COST AND PERFORMANCE TRADES BETWEEN THE ACTIVE CONFIGURATION AND PASSIVE MUFFLERS WILL BE MADE AND AN EXPERIMENT WILL BE DESIGNED FOR ...

    SBIR Phase I 1994 Department of DefenseNavy
  3. ON AIRCRAFT ANALYSIS OF F-14 AIRCRAFT WING BEARINGS

    SBC: Technology Integration Inc.            Topic: N/A

    Wing bearings on the Navy's F-14 aircraft are currently replaced at regularr intervals or upon detection of audible wing bearing noise. It is proposed to evaluate the feasibility of wing bearing condition assessment. This assessment plan includes test monitoring both strain gauge data from the structural members moving the wings and acceleration data from accelerometers temporarily mounted on the ...

    SBIR Phase I 1994 Department of DefenseNavy
  4. AIRCRAFT HYDRAULIC PUMP CONDITION MONITORING SYSTEM

    SBC: Technology Integration Inc.            Topic: N/A

    We propose to develop a device that monitors aircraft hydraulic pumps. This device will use two key sensor technologies: vibration measurements on the pump housing and electromagnetic sensing of pump debris particles. Signals from these sensors are fed into a micro-computer. Two signal processing strategies will be employed: traditional measurement of the signal characteristics, and a neural net a ...

    SBIR Phase I 1994 Department of DefenseNavy
  5. Military Qualification of Reclaimed Explosives

    SBC: TPL, INC.            Topic: N/A

    Disposal of surplus explosives is a major problem due to lack of storage space, environmental restrictions on OB/OD, and expected increase in active program retirements due to military downsizing. Military use of reclaimed explosives is an attractive alternative, with major cost benefits, but is inhibited by current material specifications and general concerns over material performance. An investi ...

    SBIR Phase II 1994 Department of DefenseNavy
  6. FLEXIBLE MANUFACTURING TECHNOLOGY FOR RAPID PRODUCTION OF METAL MATRIX COMPOSITES FOR AVIONICS PACKAGING SYSTEMS

    SBC: Triton Systems, Inc.            Topic: N/A

    A novel approach to agile manufacturing for production of metal matrix composites (MMC) is proposed. The composites are precision cast by pressurized infiltration casting. Thin-walled ceramic molds are used to contain and infiltrate complex-shaped preforms. A powerful, user-friendly 3D graphics software package is used to interactively create mold designs from the solid model of MMC component to b ...

    SBIR Phase II 1994 Department of DefenseNavy
  7. Agile Manufacturing of Fiber Reinforced Complex Shape Metal Matric Composites Structures with Application V-22

    SBC: Triton Systems, Inc.            Topic: N/A

    A novel agile manufacturing system for production of fiber reinforced complex shape metal matrix composites (MMCs) is proposed. The composites are precision cast by pressurized infiltration casting. Thin-walled ceramic molds are used to contain and infiltrate complex-shaped preforms. A powerful, user-friendly 3D graphics software package is used to interactively create mold designs from the solid ...

    SBIR Phase I 1994 Department of DefenseNavy
  8. Remote Environmental Data Link

    SBC: VIASAT, INC.            Topic: N/A

    This Phase I proposal describes a low cost, two-way satellite data link for retrieval of broadband environmental data from remote sensor sites at sea. The proposed approach uses existing space resources providing a mix of low and high bandwidth users with data rates up to 100 bps per user. Thousands of simultaneous users can be supported depending on the mix of users. Phase I results demonstrate i ...

    SBIR Phase II 1994 Department of DefenseNavy
  9. ADVANCED SYSTEMS AND TECHNOLOGIES FOR FUTURE NAVAL WARFARE: A SURVEILLANCE SENSOR WITHOUT CRYO-COOLERS

    SBC: Xacton Corp            Topic: N/A

    The objective of this work is the development of 3 - 5 micron sensors operating at temperatures from 30C to 70C, for use in Space-Based Surveillance Systems without the use of Cryo-coolers, or uncooled. It is based on a major breakthrough achieved at Xacton. This has led to the fabrication of wafers of Mercury Cadmium Telluride with a very high level of crystalline perfection, very low defect dens ...

    SBIR Phase I 1994 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government