You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Robust Terrain-Adaptive Vehicle Planning and Control

    SBC: Quantum Signal LLC            Topic: A14AT018

    Autonomous or teleoperated navigation of unmanned ground vehicles (UGVs) is difficult even in benign environments due to challenges associated with perception, decision making, and human-machine interaction, among others. In environments with rough, sloped, slippery, and/or deformable terrain, the difficulty of the navigation problem increases dramatically. In this effort, Quantum Signal, LLC, Un ...

    STTR Phase I 2014 Department of DefenseArmy
  2. Next Generation Tracking Architectures for Urban Surveillance Areas

    SBC: ULTRAHINET LLC            Topic: AF13AT10

    ABSTRACT: UltraHiNet, LLC (UHN) proposes to develop a prototype next generation tracking architecture which exploits wide area motion imagery (WAMI) systems and leverages projected heterogeneous high performance computing (HPC) architectures for on-board and ground-based processing of vehicle and dismount targets for urban surveillance. Our research team will focus on the following goals: 1. Dev ...

    STTR Phase I 2014 Department of DefenseAir Force
  3. Oxygen Production and Delivery on Demand

    SBC: GLOBAL RESEARCH & DEVELOPMENT INC            Topic: DHA17B005

    This proposal is in response to the Defense Health Agency 2017 Phase I SBIR topic 17B-005.The approach is the use of a membrane oxygen pump using newly developed nano-thickness membranes with all the layers less than 1 micron total.Nanometer thickness membranes enable more oxygen output per surface area at temperatures of 300-600 C than current state-of-the -art 600-800 C membranes that are 50-300 ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  4. PRIME: PRimary Integration and Maturation of EGS

    SBC: THE DESIGN KNOWLEDGE COMPANY LLC            Topic: AF18BT012

    Legacy satellite command and control capabilities and their related telemetry operate in a largely stove piped framework. Satellites are still commanded, controlled, and communicated with their ground station in a specific constellation structure. Each ground station is unique to a given constellation and the communications and telemetry are aligned to the specific constellation, underscoring an o ...

    STTR Phase I 2019 Department of DefenseAir Force
  5. Rapid Nondestructive Inspection of Traditionally Uninspectable Adhesively-Filled Composite Joints

    SBC: THERMAL WAVE IMAGING INC            Topic: AF18BT016

    NDI of composite Pi/T-Joints presents significant challenges to existing inspection technologies resulting in a barrier to implementation in production. We will investigate feasibility of developing an active thermography NDI solution for real-world inspection of composite structures with T / Pi- joints during the manufacturing process (both green and cured states). Based on the extensive experien ...

    STTR Phase I 2019 Department of DefenseAir Force
  6. Optimization of Sodium Guide Star Return using Polarization and/or Modulation Control

    SBC: APPLIED OPTIMIZATION, INC.            Topic: AF19AT008

    The research objective of the proposed work is to increase the efficiency of the laser return of a Sodium Guide Star Laser (SGSL) reflected off the sodium layer for increased reliability and applicability of the artificial guide star technique. During Phase I, we will demonstrate the concept of maximizing the SGSL signal returns using numerical simulations that account for the effects of atmospher ...

    STTR Phase I 2019 Department of DefenseAir Force
  7. Multifunctional Integrated Sensing Cargo Pocket UAS

    SBC: ENDECTRA LLC            Topic: AF19AT016

    Palm-sized unmanned aerial systems (nano UAS) weighing tens of grams have evolved to the point where they are becoming useful to the warfighter. However, their small mass, fragility, and limited batteries still necessitate the use of emerging, low mass/power technologies to meet the full range of potential missions, including new autonomous flight control and collision avoidance strategies, struct ...

    STTR Phase I 2019 Department of DefenseAir Force
  8. Tunable bioinspired spatially-varying random photonic crystals

    SBC: APPLIED OPTIMIZATION, INC.            Topic: AF19AT017

    The research objective is to develop a tunable spatially-varying photonic crystal (SVPC) to achieve the optical propagation properties (reflection and transmission) of the light through the designed structure for the visible and near IR-bands. The light from this SVPC will be able to focus and bend as a function of the spatial variation of the refractive index, input angle, and state of polarizati ...

    STTR Phase I 2019 Department of DefenseAir Force
  9. Novel Nanocoating technology for Functional Textile

    SBC: Claros Technologies Inc.            Topic: A18BT024

    Nanoparticles represent an attractive alternative in coating processes due to their functional versatility, including surface, optical, conductive and catalytic properties. However, current processes of coating textile products with nanoparticles results in rapid loss of the nanoparticles during laundering or use, leading to a significant decrease in product durability and functionality and increa ...

    STTR Phase I 2019 Department of DefenseArmy
  10. Metal Additive Manufacturing with Minimal Post Processing (MaMMPP) (18-RD-116)

    SBC: UES INC            Topic: A18BT003

    Metal Additive Manufacturing (AM) research has typically addressed understanding how to maximize performance for an AM material, taking into account microstructural anisotropy, residual stress, defects (such as pores and lack of fusion defects), and surface finish. Optimizing a part then requires significant post processing such as hot isostatic pressing (HIP), heat treatment and surface finishing ...

    STTR Phase I 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government