Award Data

Alloys of aluminum in the 7000 series are known to have good weight, strength, and fatigue properties and are commonly used in Naval aircraft components. Recent manufacturing trends are increasingly focused on additive manufacturing (AM) methods as a way to reduce lead time, cost, and to improve part performance. Current additive manufacturing techniques are unable to fabricate parts in 7000 serie ...

Degraded weather conditions particularly, dense maritime fog, reduces the US Fleet EO/IR systems ability to maintain situational awareness and detect/identify and track targets of interest. It is the Navys goal to develop an active EO/IR imaging system that jointly optimizes illumination source properties and implements advanced image processing to improve performance and operational range of curr ...

Optonicus proposes development of the Wide-Area Laser Additive Manufacturing in Metals with Adaptive Beam Shaping (WALAM-ABS) laser additive manufacturing (LAM) system. The WALAM-ABS metal additive manufacturing system will solve long-standing drawbacks imposed by current single-point selective laser melting LAM technology through the use of wide-area processing based on proprietary multi-beam fib ...

ABSTRACT: This Phase I effort will involve the development of an ultra low cost, high specific power, modular and flexible solar array module using currently available thin-film solar cells, innovative interconnects, and flexible encapsulation. The high efficiency thin-film solar cells will enable high specific power and flexibility in the module. The interconnect scheme and encapsulation will a ...

The opportunity presented under this program is to develop a next-generation, self-sealing technology that can impart self-sealing capability to the most vulnerable areas of integral aircraft fuel tanks. Targeted application of the self-sealing materials will reduce the weight and fuel-volume penalty associated with conventional fuel bladder constructions. Under the Phase I program, the technical ...

A triple pulse PIV concept and a third order correlation method was developed and demonstrated improvements in accuracy and spatial resolution of the velocity and acceleration measurements in an impinging jet flow field. A low-cost system based on overdriven LEDs, uniquely designed single frame camera for capturing the images, efficient scattering techniques, and innovative algorithms were explore ...

ABSTRACT: Phosphor materials are currently being utilized in a wide variety of applications. The requirements for phosphors have become more and more stringent with smaller and smaller particles being required. In the Phase I program UES Inc. in collaboration with Penn State University has demonstrated the feasibility of a few approaches for high rate production of high efficiency IR to IR up-con ...

ABSTRACT: Modern gas-turbine engines designs for the next-generation warfighter need to reduce exhaust gas temperatures to reduce effective thermal footprint thereby improving the mission capability. In such situations, high-altitude engine operation is often limited by the overall combustion efficiency, lean flame blow out (LBO) limit, and combustion instabilities that results in narrower opera ...

ABSTRACT: Protection of first responders who are exposed to hazards including chemical warfare agents (CWAs) is a very critical need. The need is derived from not only their welfare but their ability to respond, protect the community and provide logistical support to the response. A simple exposure monitor would provide critical information to the first responder and allow them to respond accor ...

SRICO proposes to combine metamaterial narrowband absorbers and SRICO-proprietary thin film pyroelectric thermal detectors to produce ultra low size, weight, power and cost (SWAP-C) room temperature stand-off chemical sensors. Metamaterial narrowband absorber elements are integrated into the thin film pyroelectric detector process to provide conversion of radiation to heat, which is then sensed by ...