You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 195961 - 195970 of 207725 results
  1. Degassing of Nanostructured Composite Powders Utilizing Unique, Low-Cost Heating Method

    SBC: Applied Colloids            Topic: A11010

    Applied Colloids proposes the use of a unique heating method to degass cryomilled powders for use in Metal Matrix Composites (MMCs). This method is low-cost and scaleable to production quantities. Phase I of this program will degass nanostructured aluminum-boron carbide powders at the rate of 20 pounds per eight hours. Cryomilled powders will be supplied by Bepex International, a company famili ...

    SBIR Phase I 2011 Department of DefenseArmy
  2. Instrumented Projectiles for Measuring Impact Forces to Characterize Ballistic Behavior of Fabrics and Composites

    SBC: McQ Inc.            Topic: A11011

    The current laboratory methods used to experimentally evaluate the performance of textile armor fabric during ballistic impact do not provide time dependent load information. However, knowledge of the dynamic load spectrum imparted by a projectile to the fabric is required in order to properly characterize the dynamic response and failure mode of fabric yarns. What is needed is a real-time measuri ...

    SBIR Phase I 2011 Department of DefenseArmy
  3. Instrumented Projectiles for Measuring Impact Forces to Characterize Ballistic Behavior of Fabrics and Composites

    SBC: SYNTRONICS            Topic: A11011

    The Army utilizes soft body and vehicle armor systems made up of fabrics and composite materials for resistance to minimum weight ballistic impacts. To characterize the performance of these systems, the development of high fidelity sensors and data collection instrumentation is a necessary"first step"to assess the armor system"s performance. An instrumented test projectile that can report the lo ...

    SBIR Phase I 2011 Department of DefenseArmy
  4. Functionalized Graphene Based Supercapacitors

    SBC: VORBECK MATERIALS CORP.            Topic: A11013

    The power requirements of many devices and applications, ranging from transportation to portable telecommunications, exceed the capabilities of conventional batteries. Supercapacitors can provide such high powers due to their high charge-discharge rates and have the advantage of being stable for much longer times compared to batteries; but, they usually have low energy densities. There are two dir ...

    SBIR Phase I 2011 Department of DefenseArmy
  5. Micro-Feather Sense and Control MAV Performance Aerodynamic Enhancement System

    SBC: PHYSICAL SCIENCES INC.            Topic: A11015

    Physical Sciences Inc. (PSI) in collaboration with the Iowa State University (ISU) proposes to develop an innovative bio-inspired approach for dramatically increasing the efficiency and agility of micro air vehicles (MAVs). The concept is to develop micro-feather/hair covered membrane wings for a flapping wing MAV that will allow the vehicle to approach the flight efficiency and agility of the Haw ...

    SBIR Phase I 2011 Department of DefenseArmy
  6. A MEMS-Based Sensor Array for Flow Field Measurements and Aerial Vehicle Control

    SBC: CREARE LLC            Topic: A11015

    Small and micro unmanned aerial systems are desired for carrying sensors into cluttered urban environments, areas of dense vegetation, and confined spaces. Control systems for these small vehicles are currently based on control approaches for larger vehicles in well-defined flows and are inadequate for gusty, highly dynamic environments, extreme vehicle maneuvers, and unconventional flight mechan ...

    SBIR Phase I 2011 Department of DefenseArmy
  7. Interface System Production, Evaluation, and Comparison Tool (INSPECT) Suite

    SBC: CHARLES RIVER ANALYTICS, INC.            Topic: A11017

    Currently available usability assessment tools provide a variety of approaches to automated graphical user interface (GUI) evaluation, each with their own advantages and disadvantages. To optimally exploit each tool"s strengths, a structured framework for integration is needed. However, a unifying framework that combines the outputs of various tools is not sufficient since it fails to address the ...

    SBIR Phase I 2011 Department of DefenseArmy
  8. Direct Energy Conversion Fuel Cell Using Ethylene Glycol with Non-Precious Metal Catalysts

    SBC: GINER INC            Topic: A11018

    The proposed work will evaluate a new class of non-precious metal anode catalysts for Direct Ethylene Glycol Fuel Cells (DEGFC) in practical fuel cell hardware. The influence of catalyst composition and morphology on processing method, and on anode polarization will be investigated. The improved electrooxidation catalysts, together with low membrane cross-over rates and the potential to use very c ...

    SBIR Phase I 2011 Department of DefenseArmy
  9. LSPR Nanostructures for SERS

    SBC: REAL-TIME ANALYZERS INC            Topic: A11019

    The overall goal of this proposed program (through Phase III) is to develop a chemical warfare agent analyzer capable of detecting vapor phase agents at 10-7g/m3 in less than 1 minute. This will be accomplished by developing a method to produce novel localized surface plasmon resonance (LSPR) nanostructures, supported by theory, that produce a minimum surface-enhanced Raman scattering (SERS) enha ...

    SBIR Phase I 2011 Department of DefenseArmy
  10. Ultrasound for neuromodulation and control of post-trauma pain

    SBC: Synsonix, LLC            Topic: A11020

    The objective of this proposal is to demonstrate the feasibility of using ultrasound induced neuromodulation to manage pain. SynSonix, LLC has been developing ultrasound neuromodulation (UNMOD) to noninvasively stimulate neural circuitry. Many studies have established the beneficial effects of neurostimulation for managing pain. However current methodologies require surgical implantation of stimu ...

    SBIR Phase I 2011 Department of DefenseArmy
US Flag An Official Website of the United States Government