You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 196131 - 196140 of 205243 results
  1. High-speed volumetric measurement system for high-rate deformation

    SBC: TRIPLE RING TECHNOLOGIES INC            Topic: A11008

    We at Triple Ring Technologies, Inc. propose to begin development of a very-high-speed volumetric imaging system and image analysis algorithm that together will be able to track the evolution of high-rate deformations. The key to our proposed technology is our proprietary high-speed X-ray detector that generates images at 780,000 frames per second and is capable of up to 1.4 million frames per sec ...

    SBIR Phase I 2011 Department of DefenseArmy
  2. Readout-Integrated Circuit (ROIC)

    SBC: Aerius Photonics, LLC.            Topic: A11009

    Corrugated Quantum Well Infrared Photo-Detector (C-QWIP) Focal Plane Arrays (FPAs) are being extended to higher resolutions with some compromise to detector performance. These FPAs have many LWIR camera applications at the ARMY, including the Objective Pilotage for Utility and Lift (OPUL) program, unmanned air vehicles (UAV), command and control (C2), and helicopters (K-MAX). The technology also h ...

    SBIR Phase I 2011 Department of DefenseArmy
  3. Broadband long wavelength large format focal plane array sensors

    SBC: INFRARED LABORATORIES INC            Topic: A11009

    The objective of this proposal is to use the proprietary knowledge of readout integrated circuit (ROIC) design gained through our past 20+ years of experience to investigate, research and design a dedicated readout architecture optimized for the high performance C-QWIP PDAs developed by the Army Research Laboratory (ARL) and its partner. These high performance C-QWIP PDAs have demonstrated good r ...

    SBIR Phase I 2011 Department of DefenseArmy
  4. Improved Efficiency Process for Degassing Nanostructured Composite Powders- Alternate PCA

    SBC: THERMACORE, INC.            Topic: A11010

    Degassing to remove Hydrogen is an expensive and time consuming problem. One solution is to find innovative degassing processes. Another is to eliminate one of the sources of hydrogen namely Stearic Acid which is the surfactant of choice. This proposal attempts to replace stearic acid with pure carbon. Some early work suggested this change might be possible. The proposal focuses on the basis ...

    SBIR Phase I 2011 Department of DefenseArmy
  5. Degassing of Nanostructured Composite Powders Utilizing Unique, Low-Cost Heating Method

    SBC: Applied Colloids            Topic: A11010

    Applied Colloids proposes the use of a unique heating method to degass cryomilled powders for use in Metal Matrix Composites (MMCs). This method is low-cost and scaleable to production quantities. Phase I of this program will degass nanostructured aluminum-boron carbide powders at the rate of 20 pounds per eight hours. Cryomilled powders will be supplied by Bepex International, a company famili ...

    SBIR Phase I 2011 Department of DefenseArmy
  6. Instrumented Projectiles for Measuring Impact Forces to Characterize Ballistic Behavior of Fabrics and Composites

    SBC: McQ Inc.            Topic: A11011

    The current laboratory methods used to experimentally evaluate the performance of textile armor fabric during ballistic impact do not provide time dependent load information. However, knowledge of the dynamic load spectrum imparted by a projectile to the fabric is required in order to properly characterize the dynamic response and failure mode of fabric yarns. What is needed is a real-time measuri ...

    SBIR Phase I 2011 Department of DefenseArmy
  7. Instrumented Projectiles for Measuring Impact Forces to Characterize Ballistic Behavior of Fabrics and Composites

    SBC: SYNTRONICS            Topic: A11011

    The Army utilizes soft body and vehicle armor systems made up of fabrics and composite materials for resistance to minimum weight ballistic impacts. To characterize the performance of these systems, the development of high fidelity sensors and data collection instrumentation is a necessary"first step"to assess the armor system"s performance. An instrumented test projectile that can report the lo ...

    SBIR Phase I 2011 Department of DefenseArmy
  8. Functionalized Graphene Based Supercapacitors

    SBC: VORBECK MATERIALS CORP.            Topic: A11013

    The power requirements of many devices and applications, ranging from transportation to portable telecommunications, exceed the capabilities of conventional batteries. Supercapacitors can provide such high powers due to their high charge-discharge rates and have the advantage of being stable for much longer times compared to batteries; but, they usually have low energy densities. There are two dir ...

    SBIR Phase I 2011 Department of DefenseArmy
  9. Micro-Feather Sense and Control MAV Performance Aerodynamic Enhancement System

    SBC: PHYSICAL SCIENCES INC.            Topic: A11015

    Physical Sciences Inc. (PSI) in collaboration with the Iowa State University (ISU) proposes to develop an innovative bio-inspired approach for dramatically increasing the efficiency and agility of micro air vehicles (MAVs). The concept is to develop micro-feather/hair covered membrane wings for a flapping wing MAV that will allow the vehicle to approach the flight efficiency and agility of the Haw ...

    SBIR Phase I 2011 Department of DefenseArmy
  10. A MEMS-Based Sensor Array for Flow Field Measurements and Aerial Vehicle Control

    SBC: CREARE LLC            Topic: A11015

    Small and micro unmanned aerial systems are desired for carrying sensors into cluttered urban environments, areas of dense vegetation, and confined spaces. Control systems for these small vehicles are currently based on control approaches for larger vehicles in well-defined flows and are inadequate for gusty, highly dynamic environments, extreme vehicle maneuvers, and unconventional flight mechan ...

    SBIR Phase I 2011 Department of DefenseArmy
US Flag An Official Website of the United States Government