You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 196211 - 196220 of 207712 results
  1. Cognitive Radio Spectrum Management and Waveform Adaptation for Advanced Wideband Space Communication Systems

    SBC: Space Micro Inc.            Topic: AF11BT03

    ABSTRACT: Space Micro, a current producer of space-qualified radios, has partnered with the University of Arizona to develop an agile space radio. Space Micro will enhance its wideband spectrum sensing, modulation sensing and adaptive waveform transmission capabilities with the intelligent management strategies developed by the University of Arizona. This will create a context-aware radio capable ...

    STTR Phase I 2012 Department of DefenseAir Force
  2. 3-D nondestructive imaging techniques for mesoscale damage analysis of composite materials

    SBC: Multiscale Design Systems, LLC            Topic: AF11BT04

    ABSTRACT: Our objective is to establish a non-destructive, three-dimensional, image-based analysis protocol for inhomogeneous materials that inherently considers the heterogeneous nature of condensed matter. The process begins with a 3-D assessment of the internal material structure performed using a high-resolution micro-CT scanner. Next, reconstruction of a statistically optimal RUC will be per ...

    STTR Phase I 2012 Department of DefenseAir Force
  3. 3D nondestructive imaging techniques for mesoscale damage analysis of composite materials

    SBC: NEXTGEN AERONAUTICS, INC.            Topic: AF11BT04

    ABSTRACT: Energetic materials may be subjected to severe environments of pressure and shear loading, causing damage that leads to premature initiation or suboptimal performance. This damage is at the mesoscale, at and below the grain size of the particles, in the range of 5-400 microns. X-ray computed microtomography is a 3D non-destructive technique that can be used for imaging this damage. It e ...

    STTR Phase I 2012 Department of DefenseAir Force
  4. 3-D nondestructive imaging techniques for mesoscale damage analysis of composite materials

    SBC: L J ENGINEERING TECHNOLOGY            Topic: AF11BT04

    ABSTRACT: The main issue with the development of a reliable constitutive model for explosive materials and concretes is the lack of a fundamental understanding of the evolution of 3-D microstructure and damage in these materials when they are subjected to multi-axial loading under confinement conditions. The main technical challenges are determining the 3-D microstructure and damage evolution pro ...

    STTR Phase I 2012 Department of DefenseAir Force
  5. Printable Integrated Photonic Devices

    SBC: Abeam Technologies Inc.            Topic: AF11BT05

    ABSTRACT: aBeam Technologies, Inc. proposes a new printing technology for fabricating photonic devices. This nanofabrication process could potentially reduce to a single step, the fabrication of photonic crystals by direct imprinting on inorganic materials. The method is low cost and suitable for large-scale areas. The demonstration of feasibility of the method will provide the basis for fabricat ...

    STTR Phase I 2012 Department of DefenseAir Force
  6. Low-Cost, High-Throughput Roll-to-Roll Printing of Integrated Photonic Devices on Flexible Substrates via a Combination of Nanoimprinting and Ink-Jet

    SBC: OMEGA OPTICS, INC.            Topic: AF11BT05

    ABSTRACT: In this program, Omega Optics, Inc., in collaboration with the University of Michigan Ann Arbor and the University of Texas at Austin, proposes low-cost, high-throughput roll-to-roll (R2R) printing of integrated photonic devices by using a high-rate R2R ink-jet printing system in conjunction with a high-rate R2R nanoimprint lithography (R2RNIL) system and demonstrate fabrication of pho ...

    STTR Phase I 2012 Department of DefenseAir Force
  7. Solution Printed OTFT Driven Infrared Detectors

    SBC: AGILTRON, INC.            Topic: AF11BT05

    ABSTRACT: Leveraging Agiltron"s organic thin film transistor (OTFT) array design and printing technology and industrial leading developments and productions uncooled mid-infrared (mid-IR) detectors and detector arrays, we propose to develop a new class of high performance printed mid-IR detectors and detector arrays with integrated OTFT-based drive electronics. The approach is closely coupled w ...

    STTR Phase I 2012 Department of DefenseAir Force
  8. Sensitivity Analysis Methods for Complex, Multidisciplinary Systems

    SBC: ZONA TECHNOLOGY INC            Topic: AF11BT06

    ABSTRACT: The Phase I technical objective is twofold. First, the ZONA/MIT team will develop an Unsteady Aero-Structural Adjoint (UASA) methodology and implement it in a 2-D unsteady Euler solver. The objective of the effort is to investigate and resolve the technical issues involved in the development of the proposed UASA methodology. In this effort, we will first identify the pros and cons of a ...

    STTR Phase I 2012 Department of DefenseAir Force
  9. Sensitivity Analysis Methods for Complex, Multidisciplinary Systems

    SBC: SCIENTIFIC SIMULATIONS, LLC            Topic: AF11BT06

    ABSTRACT: The objective of this proposal is to develop efficient sensitivity analysis methods based on adjoint techniques for multi-disciplinary time-dependent problems. The approach is based on the discrete adjoint, which will be derived and implemented on a software component basis, with the various multidisciplinary software components being linked together through a Python interface, thus pre ...

    STTR Phase I 2012 Department of DefenseAir Force
  10. Novel Gas-Diffusion Electrodes for Carbon Dioxide Electroreduction

    SBC: GINER INC            Topic: AF11BT07

    ABSTRACT: As security of fossil fuel sources is diminishing, the generation of synthetic fuels may constitute a significant strategic capability for the USAF. GES and the INL propose novel catalysts and electrochemical cell components for the electroreduction of carbon dioxide to syngas. Catalyst composition will be formulated to optimize both product selectivity and cell efficiency. A prelimina ...

    STTR Phase I 2012 Department of DefenseAir Force
US Flag An Official Website of the United States Government