You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 196271 - 196280 of 207725 results
  1. Toughened E-Beam Curable Resins for Low Cost, Rapidly Pultruded, Filament Wound and Resin Transfer Molded Composites

    SBC: AEROPLAS CORP. INTERNATIONAL            Topic: N/A

    The objective of the proposed program is to demonstrate the feasibility of an innovative, cost-effective, rapid-pultrusion composite processing technique and newly formulated resins which substantially reduce the need for expensive tooling, high puller tensions (dies are expected to be an order of magnitude shorter than conventional pultrusion dies) and slow thermal processing and can cure the com ...

    SBIR Phase II 1996 Department of DefenseArmy
  2. Toughened E-Beam Curable Resins for Low Cost, Rapidly Pultruded, Filament Wound and Resin Transfer Molded Composites

    SBC: AEROPLAS CORP. INTERNATIONAL            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseArmy
  3. Toughened Fabrics with Counter-WMD Functionality for Daily Wear

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: DTRA122016

    Military personnel and first responders must be prepared to operate under the threat of a wide range of CBRNE threats (chemical, biological, radiological, nuclear, and high explosive) and rapidly counter WMD hazards. Daily-wear uniforms such as the army combat uniform (ACU) or the CWU-27/P flight suit are breathable and lightweight and provide basic abrasion and fire protection, but are not capab ...

    SBIR Phase I 2013 Department of DefenseDefense Threat Reduction Agency
  4. Toughened Hafnium Nitride Cermets for KKV Propulsion Systems

    SBC: EXOTHERMICS, INC.            Topic: N/A

    "This proposal addresses MDA's stated requirement to significantly improve the affordability, maintainability and technical performance characteristics of kinetic kill vehicle propulsion hardware; specifically, divert and attitude control system (DACS)components. In light of these challenges, Exothermics proposes that a new, ultrahigh temperature-capable category of refractory nitride cermets (tw ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  5. Toughened, Low Cost, Re-configurable Stowage System

    SBC: KaZaK Composites Incorporated            Topic: N05153

    Watercraft mission modules are provided to the Navy with custom cradles specific to the vessel. These cradles are often not designed to meet shock and vibration requirements, are difficult to store when not in use and often have different systems and operational parameters. Variations in mission module cradles are due to a range of parameters in size, weight and geometric configurations that could ...

    SBIR Phase I 2006 Department of DefenseNavy
  6. TOUGHENED LOW PERMEABILITY C-SIC ROCKET THRUSTER

    SBC: Ceramic Composites, Inc.            Topic: N/A

    Ceramin Composites is please to propose an innovative ceramic composite sheath-monolithic ceramic concept that offers the potential for a tough, low permeability rocket thruster. A previous Phase I SBIR program demonstrated that exceptional damage tolerance and strength improvements could be achieved by bonding a thin SiC/SiC composite skin (0.5mm) to a 3mm monolithic Reaction Bonded Silicon Nitri ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  7. Toughened, Weather Resistant Carbon-Carbon

    SBC: CORNERSTONE RESEARCH GROUP INC            Topic: N222127

    Cornerstone Research Group Inc. proposes to advance the state-of-the-art in mechanically toughened, weather resistant CMC composites by combining recent advances in 2.5D and 3D architecture technologies, and plasma deposition processes, with a CRG proprietary resin system called MG Resin. Addressing the need for affordable hot structures, MG Resin has proven to be an excellent material for replaci ...

    SBIR Phase I 2023 Department of DefenseNavy
  8. TOUGH HIGH MODULUS EPOXY CASTING MATERIALS

    SBC: Gumbs Associates, Inc.            Topic: N/A

    THE OVERALL OBJECTIVE OF THIS PROJECT IS TO DEMONSTRATE THE FEASIBILITY OF PREPARING LOW VISCOSITY, ROOM TEMPERATURE CURABLE, TOUGH, HIGH MODULUS EPOXY CASTING MATERIALS USING POLY(ARYL ETHER KETONES) AND POLY(ARYL ETHER SULFONE KETONE) COPOLYMERS AS IMPACT MODIFIERS. TOUGH, HIGH MODULUS CASTING MATERIALS ARE NOT AVAILABLE. AS THE MODULUS INCREASES, THE BRITTLENESS OF THE CONVENTIONAL PLASTICS ALS ...

    SBIR Phase II 1987 Department of DefenseNavy
  9. TOUGH HIGH MODULUS EPOXY CASTING MATERIALS

    SBC: Gumbs Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseNavy
  10. Tough, Impact-Resistant Composite Structures for Lightweight Airborne Laser Subsystem

    SBC: Vanguard Composites Group, Inc.            Topic: N/A

    "The Airborne Laser (ABL) system is being developed using a Boeing 747 aircraft platform for use in missile defense systems. Improved missile defense effectiveness and ABL system performance such as range are improved if the platform and ABL system weightcan be reduced. Current ABL technology demonstration systems and subsystems, such as the ABL-Pressure Recovery Subsystem (ABL-PRS) use heavier ma ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government