You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of Adaptive Closure Models for Large Eddy Simulations of Lean Blow-Out Conditions

    SBC: CFD RESEARCH CORPORATION            Topic: AF16AT14

    Next-generation turbulent combustion models must enable accurate prediction of lean blow-out and flashback for complex geometries, fuels and operating conditions relevant to the Air Force. Improved models are needed to better predict kinetically and hydr...

    STTR Phase I 2016 Department of DefenseAir Force
  2. Fully Metallic Self-Fragmenting Structural Reactive Materials Using Composites and Alloys Comprised of Aluminum, Lithium, and Magnesium

    SBC: Adranos Energetics LLC            Topic: DTRA16A002

    While aluminum casing materials provide some enhanced performance and thermal loading to explosive ordinance, their overall effectiveness is highly limited by incomplete combustion and long residence times. In order to reduce these problems, the casing material must be designed to facilitate rapid fragmentation through either specialized casing geometries or greatly refined initial particle sizes. ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  3. Novel Polymer-Derived Carbide and Boride Refractory Ceramics

    SBC: EDWARD POPE DR            Topic: AF16AT26

    In this Air Force Phase I STTR program, MATECH proposes to demonstrate novel pre-ceramic polymer systems complimenting the development of Ultra High Temperature (UHT), high ceramic yield, refractory ceramic matrix composites (CMCs). A leader in developme...

    STTR Phase I 2016 Department of DefenseAir Force
  4. Energy Harvesting Fabric

    SBC: STREAMLINE AUTOMATION LLC            Topic: A15AT017

    A human produces more than 100 Watts of waste heat during normal activity. If a fraction of this heat energy can be harvested it can replace the stored chemical energy in one or more of the batteries typically carried by soldiers in the field. The current generation batteries, such as the BB2590 are bulky and rigid. The PowerFelt material developed by Wake Forest University is ideally suited for h ...

    STTR Phase I 2016 Department of DefenseArmy
  5. High Fidelity Computational Models for Aggregated Tissue Interaction in Surgical Simulations

    SBC: CFD RESEARCH CORPORATION            Topic: DHP16A001

    Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...

    STTR Phase I 2016 Department of DefenseDefense Health Agency
  6. Integrated Adaptive Control with Thermal and Power Management System for Gas Turbine Enginers

    SBC: INTELLIGENT FIBER OPTIC SYSTEMS CORP            Topic: AF16AT16

    Future gas turbine propulsion designs, in addition to incorporating variable geometrical engine features, will require controlling and integrating large power generation/extraction, as well as, managing thermal limits of the components. The engine contro...

    STTR Phase I 2016 Department of DefenseAir Force
  7. Validation Experiments to Measure Transient Aerothermoelastic Response of a Curved Panel to Hypersonic Flows

    SBC: METROLASER, INCORPORATED            Topic: AF16AT24

    An experiment to obtain validation data on the transient aerothermoelastic response of a curved panel in hypersonic flows will be designed and evaluated for its feasibility. Significant challenges must be overcome for a successful experimental campaign i...

    STTR Phase I 2016 Department of DefenseAir Force
  8. Low-Cost and Small-Size MBE System for Various Materials Development

    SBC: VESCO-NM, LLC            Topic: AF16AT25

    Molecular beam epitaxy has become essential technique to produce high quality materials and complicated structures. Competing with other growth techniques, such as MOCVD, it has demonstrated higher materials quality and better film uniformity. These adva...

    STTR Phase I 2016 Department of DefenseAir Force
  9. Laser and Rapid-thermal Crystalization of GeSn and SiGeSn layers for IR detectors and Si-based OE devices

    SBC: FREEDOM PHOTONICS LLC            Topic: AF16AT28

    Advanced infrared imaging techniques are of great interest but associated high costs of III-V and II-VI SWIR and MWIR materials prohibit their widespread deployment and integration with other optoelectronic devices. Freedom Photonics and its team partner...

    STTR Phase I 2016 Department of DefenseAir Force
  10. Integrated Photonics for SDM Phased Array Optical Remoting

    SBC: FREEDOM PHOTONICS LLC            Topic: AF16AT30

    allowing the sensitive RF front-end to be located away from the now more compact phased array antenna. We are proposing a rugged photonic integrated spatial division multiplexing RF link for phased array system with low cost, size, weight and power cons...

    STTR Phase I 2016 Department of DefenseAir Force
US Flag An Official Website of the United States Government