You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Analysis and Development of Scalable Techniques for Creating Optically Transparent Resistive Films with Tapered Resistivity

    SBC: Nano Terra, Inc.            Topic: SOCOM16004

    Conductive films that maintain transparency are a key element in many current products and industries, including electronic devices for touch screens and automobiles to defrost windows. Such films are also useful in military applications. By introducing a resistive taper in conductive films or antennas, overall performance can be improved by reducing backscattering and increasing sensitivity in an ...

    SBIR Phase I 2016 Department of DefenseSpecial Operations Command
  2. Using Magnetic Levitation for Non-Destructive Detection of Defective and Counterfeit Materiel

    SBC: Nano Terra, Inc.            Topic: DLA15C001

    The introduction of substandard or counterfeit materials into the DoD supply chain can have extremely expensive, and potentially life threatening, consequences. Current techniques used to detect nonconforming materiel can be destructive (e.g., manual sectioning and inspection of a part), time consuming and expensive (e.g., micro-computed tomography, ultrasound), or provide only limited informatio ...

    STTR Phase I 2016 Department of DefenseDefense Logistics Agency
  3. Smartphone Application for Mask Sizing and Projecting Quantitative Fit

    SBC: Technology Solutions Experts, Inc.            Topic: CBD161005

    Identifying the correct size of a full facepiece respirator for an individual requires a significant degree of skill. Furthermore, the fit assessment procedure is time consuming due to the series of tasks required to calculate the fit factor, a measure of the quality of fit. The Chemical and Biological Defense (CBD) program needs a quicker, less manually intensive, and reliable method to select th ...

    SBIR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  4. Novel Smart Split Neck Seals for Respiratory Protection

    SBC: Triton Systems, Inc.            Topic: CBD152002

    This development is to address the current limitation in respiratory protection neck seal designs. The developed system will allow for a smart splitneck seal design that allows for donning versatility, improved comfort, and will provide feedback to the user regarding seal performance. Theapplication of smart technology will help balance comfort with protection in ensuring that a hermetic neck seal ...

    SBIR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  5. Durable Aerosol and Liquid Repellent Coatings

    SBC: Triton Systems, Inc.            Topic: CBD161002

    Triton Systems proposes to develop durable liquid and aerosol repellent coatings for US military combat uniform fabrics and other solid surfaces of interest. The proposed coatings will combine PFOA-free fluorocarbon chemistry with unique nanotexturing using commercially off the shelf (COTS) materials to yield coatings with non-wetting properties. The Phase I will demonstrate the feasibility of our ...

    SBIR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  6. Automated Visual Anthropometry for Three-Dimensional Assessment of Respirators (AVATAR)

    SBC: Charles River Analytics, Inc.            Topic: CBD161005

    Military respirator masks provide the Warfighter with life critical protection against chemical, biological, radiological, and nuclear (CBRN) threats. To ensure the safety, comfort, and effectiveness of the American Warfighter, it is essential that every Warfighter be assigned a respirator that is properly sized and fitted. However, current methods for sizing and fitting respirators depend on manu ...

    SBIR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  7. Nanosatellite Payloads for Tactical Intelligence, Surveillance, and Reconnaissance

    SBC: Systems & Technology Research LLC            Topic: SOCOM193001

    Systems & Technology Research (STR) proposes to design a nanosatellite payload in support of Warfighter ISR via Distributed Satellites (WISRDS), a radio frequency (RF) signals intelligence (SIGINT) solution to rapidly provide actionable information to special operations forces in the tactical theater from satellites in low Earth orbit. The payload consists of a wideband, tunable, miniature antenna ...

    SBIR Phase I 2020 Department of DefenseSpecial Operations Command
  8. Detecting Substandard, Nonconforming, Improperly Processed and Counterfeit Materiel

    SBC: VIBRANT CORPORATION            Topic: DLA15C001

    Vibrant Corporation and Sandia National Laboratories (SNL) propose to apply Process Compensated Resonance Testing (PCRT) to the DLA's need for an NDI method to detect counterfeit, nonconforming and improperly processed materiel. PCRT collects and analyzes the resonance frequencies of a component to detect structural defects, characterize material, analyze population variation, monitor manufacturin ...

    STTR Phase I 2016 Department of DefenseDefense Logistics Agency
  9. Innovative concept for detection and identification of biological toxins

    SBC: DAKTARI DIAGNOSTICS, INC.            Topic: CBD152005

    The focus of this SBIR proposal is to demonstrate rapid, multiplexed detection of acute bacterial and viral pathogens of global importance on asingle test platform. Daktaris microfluidic immunoassay platform, under development since 2009 for HIV and hepatitis C (HCV) applications, iscapable of femtomolar detection of bacterial and viral antigens consistent with needs for infectious disease diagnos ...

    SBIR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  10. Infrared Hyperspectral Microscope for Rapid Characterization of Microplastics

    SBC: OPTICSLAH, LLC            Topic: 19NCER1A

    The EPA has identified a need for new methods and instrumentation to characterize size, shape, and composition of microplastics, especially in the size range of 1 µm – 1 mm. To meet the needs identified by EPA, we propose development of a portable sensor for improved microplastic sampling and characterization useable at remote measurement sites or fixed installations. The sensor would be connec ...

    SBIR Phase I 2020 Environmental Protection Agency
US Flag An Official Website of the United States Government