You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Method for Locally Measuring Strength of a Polymer-Inorganic Interface During Cure and Aging

    SBC: SURFORCE, LLC            Topic: A17AT016

    Achieving strong and durable polymer adhesion to inorganic substrates under various environmental conditions is challenging. The required long-term durability tests are over long time- and length-scales, beyond the capability of current modeling, and extensive experimental testing is needed. Currently, no commercially available method exists for monitoring how a polymer/substrate system evolves du ...

    STTR Phase I 2017 Department of DefenseArmy
  2. Dismounted Soldier Positioning, Navigation and Timing (PNT) System Initialization

    SBC: Integrated Solutions for Systems, Inc.            Topic: A17AT017

    Integrated Solutions for Systems, Inc. (IS4S) and teammate Auburn University (AU) propose to develop a PNT initialization system for dismounted soldiers. The proposed system will enhance warfighters ability to operate immediately in a GPS denied environments once their mission begins and has wide commercialization potential outside of DoD. In Phase I, the feasibility and expected benefits of inte ...

    STTR Phase I 2017 Department of DefenseArmy
  3. Two-color Infrared Laser Arrays for Scene Projection

    SBC: ATTOLLO ENGINEERING, LLC            Topic: A17AT018

    Current scene projection hardware is challenged to simultaneously meet the requirements for high peak temperature (> 2000K), high resolution (> 1Kx1K), response time < 1 ms, cryogenic and temporally uniform photon flux. MEMS, Resistor arrays, liquid crystals, and photonic crystals all suffer in one or more areas. MEMS suffer from flicker and low dynamic range. Resistor arrays suffer from low frame ...

    STTR Phase I 2017 Department of DefenseArmy
  4. Biofidelic Rat Testing Device (RTD) to Measure Blast Exposure and Loadings for TBI

    SBC: CFD RESEARCH CORPORATION            Topic: A17AT022

    The overall objective of this project (Phase I, II, and III) is to develop, fabricate, and test a novel biofidelic rat surrogate for the validation of primary blast loading conditions for mild traumatic brain injury (mTBI). The CFDRC/NJIT team will use extensive knowledge of blast loading characteristics and TBI studies coupled with past/ongoing efforts designing and testing a rat surrogate. In P ...

    STTR Phase I 2017 Department of DefenseArmy
  5. Novel Mixed-mode TCAD-Commercial PDK Integrated Flow for Radiation Hardening By Design

    SBC: CFD RESEARCH CORPORATION            Topic: DTRA16A003

    Cost-effective application of advanced commercial electronics technologies in DoD space systems requires early development of radiation-hardened-by-design (RHBD) techniques, and use of simulations is critical to the efficiency of this process. CFDRC has developed an integrated, mixed-mode simulation approach allowing their NanoTCAD device physics simulator to interface with commercial circuit simu ...

    STTR Phase I 2017 Department of DefenseDefense Threat Reduction Agency
  6. Bioaerosol Detector Wide Area Network

    SBC: Arete Associates            Topic: A17AT020

    Historically, the monitoring and detection of biological threats has been carried out via the deployment of high sensitivity / high complexity monitoring nodes to insure high probability of detection and low false alarm rate. Unfortunately, this detection strategy has inherent limits with respect to coverage and response due to its high deployment/support costs, mandating a new approach to environ ...

    STTR Phase I 2017 Department of DefenseArmy
  7. Scalable System for Precision Direction-Finding, Anti-Jam, and Anti-Spoof

    SBC: TOYON RESEARCH CORPORATION            Topic: A15AT013

    The Global Positioning System (GPS) is vulnerable to radio-frequency (RF) sources of interference and must be defended through electronic protection (EP) measures such as anti-jam (AJ) and anti-spoof (AS). The Phase I effort investigated antenna, electronic, and algorithmic designs for systems capable of supporting direction-finding (DF) measurements while simultaneously performing anti-jam and an ...

    STTR Phase II 2017 Department of DefenseArmy
  8. Advanced Printed Circuit Board Design Methods for Compact Optical Transceiver

    SBC: ATTOLLO ENGINEERING, LLC            Topic: A15AT001

    As the warfighter is increasingly using more highly integrated instruments, e.g. a laser rangefinder (LRF) combined with a laser designator and an imager, the need to decrease the size of these components becomes more important.Compact small munition applications of rangefinders particularly place an emphasis on size of the optical front end.In order to make the transceiver more compact, special a ...

    STTR Phase II 2017 Department of DefenseArmy
  9. RiskWatch: Linking Environmental Stressors to Security Outcomes

    SBC: INFERLINK CORP            Topic: A17AT021

    Many environmental factors can potentially affect a communitys security. In this project, we propose to develop an open source system, called RiskWatch, for harvesting data from multiple sources and linking that data to security outcomes. Relevant data can potentially be found in a wide variety of sources, including structured, numeric data sets and images published by governments and NGOs, in na ...

    STTR Phase I 2017 Department of DefenseArmy
  10. Freeze Casting of Tubular Sulfur Tolerant Materials for Solid Oxide Fuel Cells

    SBC: MILLENNITEK, LLC            Topic: A14AT011

    Solid oxide fuel cells have long suffered from degradation due to impurities in the fuel and complexities associated with dissimilar materials and high operating temperatures.This degradation lowers the usable cell power output and requires ancillary equipment for fuel sulfur removal and reformation.A unique microstructure for the tubular anode will be produced using a novel freeze-casting techniq ...

    STTR Phase II 2017 Department of DefenseArmy
US Flag An Official Website of the United States Government