Award Data

In this STTR effort nGimat will partner with the University of Kentucky to develop a new process for manufacturing scandia-doped tungsten powder for use in vacuum tube cathode devices. While a significant amount of research over the last several decades has shown promise for scandate cathode materials, reliable manufacturing processes that enable commercialization of this technology have remained ...

Vacuum Process Engineering Inc. in collaboration with the UC Davis millimeter wave research group proposes to develop a large scale production process for nanocomposite scandate tungsten powder for advanced high current density and long life thermionic cathodes that have been previously demonstrated by UC Davis to be superior to the commercially available state-of-the-art. The produced cathodes de ...

This proposal describes an all optical fixed wing landing system for a aircraft carrier capable of flying an aircraft all the way to landing in a RF denied environment. The precision, reliability and accuracy of this system will allow control the aircraft without the help from the pilot all the way to touch down. It will work seamlessly with UAVs and manned aircraft that have been retrofitted with ...

In our Phase I program, JEM and ASU will demonstrate a low cost manufacturing process to achieve the full theoretical hesitivity of a magnetic film that would enable greater effective hesitivity laminate. In Phase II we will develop a viable continuous process for two such materials to achieve light weight, low cost, and improved radiation efficiency; and we will seek to productize this process to ...

In this proposed SBIR program, IBC Materials & Technologies, in conjunction with our industry partner Mechanical Solutions, Inc. (MSI) and Texas A&M University, will leverage our knowledge and experience in the domain of industrial metallic coatings to develop a metallurgical coating solution for the Air Foil Bearing. IBC has deep expertise in a variety of industrial coating processes including mu ...

The ISSAC Team leverages existing knowledge and expertise in power system monitoring, fault identification, localization and isolation in conjunction with rich, deep data analytics for pattern matching to devise a system for Medium Voltage Direct Current (MVDC) power system fault management. Because of the differences between AC and DC power grids there are a significant number of problems in deal ...

The Department of the Navy has a need for the development of an additive manufacturing (AM) process for key vacuum electronic device components to meet on-demand, flexible, and affordable manufacturing requirements. The developed manufacturing method has a potential to reduce cost of vacuum electronics by as much as 70% as well as simplify and hence expedite production process of these devices by ...

For machinery control systems, forensics is a vital part to provide a cyber-protection strategy and aid in identification and troubleshooting of system malfunctions due to malicious and non-malicious events. A number of unique challenges exist for the forensic analysis of SCADA based systems. Components of a SCADA system are often resource constrained. In addition, SCADA based systems have a criti ...

DeepDive is a system for extracting relational databases from dark data: the mass of text, tables, and images that are widely collected and stored but which cannot be exploited by standard relational tools. If the information in dark data --- scientific papers, Web classified ads, customer service notes, and so on --- were instead in a relational database, it would give analysts access to a massiv ...

SA Photonics is pleased to propose the SOCRATES free space optical communication and sensing system featuring the Photonic Optical Multicast Mast Unit (POMMU). SOCRATES enables 360 degree multicast capability of high bandwidth communication in addition threat search and track capability. SA Photonics will team with the Prof. Michal Lipson of the Lipson Nanophotonics Group at Columbia University wh ...