List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Field Chemical Analysis Tool

    SBC: GRIFFIN ANALYTICAL TECHNOLOGIES, INC.            Topic: N03001

    The purpose of this Phase II effort is to demonstrate the feasibility of using an integrated field portable instrument for field chemical analysis. There are currently no means by which to fully analyze highly complex samples in the field to determine if hazardous compounds are present. Development of this capability will save lives as valuable time is lost while transferring samples to the labo ...

    SBIR Phase II 2005 Department of DefenseNavy
  2. FREQUENCY-DEPENDENT CHARACTERISTICS OF MILLIMETER-WAVE INTEGRATED CIRCUIT ELEMENTS ON ANISOTROPIC SUBSTRATES

    SBC: Sabbagh Associates, Inc.            Topic: N/A

    A SERIOUS LACK OF EFFICIENT COMPUTER AIDED DESIGN (CAD) PROCEDURES EXISTS FOR HIGH-PERFORMANCE MONOLITHIC MILLIMETER WAVE INTEGRATED CIRCUITS, THAT OPERATE BETWEEN 30 AND 100 GHZ. THIS IS DUE TO THE HIGH-FREQUENCY BEHAVIOR OF THE VARIOUS (PASSIVE) COMPONENTS AND HIGH SPEED INTERCONNECTORS OF THE SYSTEM, AS WELL AS TO THE ANISOTROPY OF THE SUBSTRATE. THIS BEHAVIOR IS NOT SIGNIFICANT AT LOWER FREQUE ...

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
  3. Fretting Wear Elimination in Gear Box Housings

    SBC: IBC Materials & Technologies, LLC            Topic: AF05129

    'IBC Materials&Technologies'is proposing to use Plasma Electrolytic Oxidation (PEO) technology to apply a hard, ductile, 100-150 micrometer (.004 - .006 in) thick coating on the bearing housing wall, to be used as anti-fretting, anti-wear, anti-corrosion protection in contact with the bearing steel surface. PEO performance is superior to conventional hard anodizing or plasma spray, is applied at t ...

    SBIR Phase I 2005 Department of DefenseAir Force
  4. GaP ZnS for Blue Light Emitting Diodes

    SBC: ASTROPOWER, INC.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseMissile Defense Agency
  5. GENERAL-PURPOSE MOTION MODULES

    SBC: Kinetic Art and Technology Corporation            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
  6. Handheld Photoacoustic Chemical Agent and Toxic Industrial Material Detector

    SBC: MANNING APPLIED TECHNOLOGY            Topic: CBD05112

    Manning Applied Technology proposes to develop a handheld infrared spectrometer, ideally suited to detection of airborne chemical agents at and below permissible exposure limits. This approach offers unmatched sensitivity and specificity for detection of all types of chemical vapors. The instrument is modular, rugged, compact and highly sensitive. Volume pricing will be less than $1000 each. ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  7. Hardware Accelerated Simulator for Scattering from Electrically Large Objects and Scenes

    SBC: EM PHOTONICS INC            Topic: AF05220

    Identifying a means of accurately simulating the scattering and radiation from large objects and scenes in a reasonable timeframe has been an active area of research for decades. Traditionally, addressing this problem has required either trading accuracy and flexibility for performance or running simulations on massive platforms such as supercomputers. Due to lingering limitations, these approac ...

    SBIR Phase I 2005 Department of DefenseAir Force
  8. Hardware Assisted Electronic Circuit Simulation System

    SBC: EM PHOTONICS INC            Topic: SB041029

    In Phase I, EM Photonics demonstrated the viability of using a reconfigurable hardware approach to accelerating the simulation of electronic circuits based on their electromagnetic properties. In Phase II, this technology will be used to create a solver capable of analyzing mixed signal circuits 64 times faster than is currently available from equivalent software. The resulting device will shrin ...

    SBIR Phase II 2005 Department of DefenseDefense Advanced Research Projects Agency
  9. Helicopter Aircrew Restraint

    SBC: Wolf Technical Services, Inc.            Topic: AF05052

    The purpose of this project is to develop magnetic technology to be incorporated into aircrew restraint system designs that will address limitations of current restraint systems in protecting crewmembers in the full range of dynamic flight environments. The new restraint technology will supply a continuum of restraint level that will automatically adapt to the severity of the flight dynamics of t ...

    SBIR Phase I 2005 Department of DefenseAir Force
  10. High Efficiency Shelter Lighting Utilizing Solid State Illumination Technology

    SBC: TECHSHOT, INC.            Topic: A04214

    The Army currently uses fluorescent lighting that is large, heavy, extremely inefficient, and expensive to illuminate deployable shelters. Because the light fixtures can't be rolled up with the portable shelter, they must be individually removed and stowed separately for transport, further compounding the logistics problem. Using a combination of commercially available and internally-developed po ...

    SBIR Phase I 2005 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government