You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Vision-Based Navigation for Formation Flight onboard ISS

    SBC: Jaycon Systems LLC            Topic: T11

    The proposed Phase II supports completion of the RINGS science missions on ISS using SVGS as real-time sensor for the EMFF maneuver. During Phase I, SVGS-based navigation of RINGS was developed and tested on a 3DOF ground-based platform, and mechanical and electrical integration of RINGS with the free-flying robotic platforms on ISS (Astrobee) was designed in detail. SVGS was deployed and tested o ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  2. Bantam Rocket Affordable SLV Stage (BRASS)

    SBC: EXQUADRUM INC            Topic: T1

    During the proposed Phase II research and development effort, the project team will complete the integration of previously demonstrated technologies into an upper stage propulsion system for a Small Launch Vehicle (SLV).nbsp; The resulting stage will meet launch vehicle requirements for Mass Fraction and Specific Impulse. The Phase II project will result in the hot-fire qualification of a flight-w ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  3. Multifunctional Integrated Photonic Lab-on-a-Chip for Astronaut Health Monitoring

    SBC: INTELLIGENT FIBER OPTIC SYSTEMS CORP            Topic: T8

    IFOS is developing a multifunctional whole-blood analysis lab-on-a-chip platform for assessment of kidney health. The IFOS innovations are found in each subsystem, including photonic integrated circuits (PICs), microelectronics, and biochemical microfluidics. The unique differentiated design is expected to result in a low SWaP-C, highly manufacturable, and highly reliable on-demand measurement pla ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  4. A Novel, Microscale, Distributable Sensor Technology for Ionizing Radiation

    SBC: CFD RESEARCH CORP            Topic: DTRA14B004

    Terrorist use of radioactive nuclear materials via nuclear and/or radiological dispersion devices (dirty bombs) is a serious threat. Therefore, it is crucial to detect proliferation of nuclear material. Critical challenges include: (a) high sensitivity detection of signature emissions from radioactive isotopes, and (b) cost-effectiveness for deployment of sensor networks across large storage facil ...

    STTR Phase II 2019 Department of DefenseDefense Threat Reduction Agency
  5. Modular Electric Propulsion Test Bed Aircraft

    SBC: ROLLING HILLS RESEARCH CORP            Topic: T901

    A hybrid electric aircraft simulation system and test bed is proposed to provide a dedicated development environment for the rigorous study and advancement of hybrid electric powered aircraft. The new test bed and simulation system will provide a dedicated platform and set of analysis tools to study, design, and test hybrid electric powered propulsion components and systems for use in commercial, ...

    STTR Phase II 2014 National Aeronautics and Space Administration
  6. Attitude Control Enhancement Using Distributed Wing Load Sensing for Dynamic Servoelastic Control

    SBC: Systems Technology, Inc.            Topic: T402

    Strain sensor information is used in nature to achieve robust flight, good rejection of wind disturbances, and stable head motion. Similar man-made sensing devices will be used to demonstrate flight control using Fly-by-Feel, with the overall objective of achieving similarly good performance with piloted and autonomous vehicles. The Phase I work demonstrated the feasibility of using strain sensor ...

    STTR Phase II 2014 National Aeronautics and Space Administration
  7. Assimilation Dynamic Network (ADN)

    SBC: MAXENTRIC TECHNOLOGIES, LLC            Topic: T1101

    The Assimilation Dynamic Network (ADN) is a dynamic inter-processor communication network that spans heterogeneous processor architectures, unifying components, significantly improving flexibility, efficiency, and overall usability. ADN has the following main features: - A uniform programming model for intra-platform communication among heterogeneous processing resources that creates a homogene ...

    STTR Phase II 2014 National Aeronautics and Space Administration
  8. Radiation Hard Monolithic SDRAM to Support DDR2 and DDR3 Architectures

    SBC: Space Micro Inc.            Topic: T1501

    Space Micro has developed the architecture for a radiation hardened memory subsystem that targets DDR3-and-beyond generations of DRAM. The architecture combines server platform error correction and memory buffer-on-board schemes with Space Micro proprietary techniques for radiation hardening and size, weight, and power reduction. During the NASA Phase I effort, Space Micro demonstrated two key ele ...

    STTR Phase II 2014 National Aeronautics and Space Administration
  9. High Performance Multiphase Combustion Tool Using Level Set-Based Primary Atomization Coupled with Flamelet Models

    SBC: STREAMLINE NUMERICS, INC.            Topic: T101

    The innovative methodologies proposed in this STTR Phase 2 project will enhance Loci-STREAM which is a high performance, high fidelity simulation tool already being used at NASA/MSFC for a variety of CFD applications. This project will address critical needs in order to enable fast and accurate simulations of liquid space propulsion systems of relevance to NASA's Space Launch System (SLS) program ...

    STTR Phase II 2014 National Aeronautics and Space Administration
  10. Power Generating Coverings and Casings

    SBC: Streamline Automation, LLC            Topic: T301

    Advances in structured heterogeneity together with nanomaterials tailoring has made it possible to create thermoelectrics using high temperature, polymer composites. While such thermoelectrics do not have the capability to approach the efficiency of top performing ceramic modules such as BiTe, they do provide two unique aspects of use in energy scavenging: the ability to conform to irregular large ...

    STTR Phase II 2014 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government