You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Efficient High-Power Tunable Terahertz Sources using Optical Techniques

    SBC: Microtech Instruments, Inc.            Topic: AF08T009

    The main objective of the proposed Phase II project is to leverage the technology of THz generation in resonantly-pumped quasi-phase-matched (QPM) GaAs structures, jointly developed by Stanford University and Microtech Instruments, Inc., and create a compact and power-efficient commercial THz source with a mW-level average power. This source will be continuously or step-tunable in the 0.5-3 THz ra ...

    STTR Phase II 2010 Department of DefenseAir Force
  2. Analysis and Modeling of Foreign Object Damage (FOD) in Ceramic Matrix Composites (CMCs)

    SBC: N&R ENGNERING MGT SUPPORT SVCS            Topic: N10AT010

    The Phase I deliverable will be a physic-based model which represents a CMC gas turbine component concomitantly at the material level and the structural level. This model will be probabilistically analyzed to account for the uncertainties in material properties and the uncertainties in the size and impact velocities of possible foreign objects (FOD). A ceramic material must display sufficient capa ...

    STTR Phase I 2010 Department of DefenseNavy
  3. Low-Cost Ball/Air/Magnetic Hybrid Bearing System for Extended-Life Micro Gas Turbine Engines

    SBC: Nastec, Inc.            Topic: N10AT037

    A unique type of air lubricated thrust bearing called a Wave Bearing is proposed to assist a rolling element bearing to carry the thrust load and to improve the bearing’s life when used in a micro gas turbine engine. The Wave Bearing technology will provide improved reliability, safety and life compared to rolling element bearings used alone, as well as to allow simplification of engine design a ...

    STTR Phase I 2010 Department of DefenseNavy
  4. Fast Updatable Large-area Holographic Display

    SBC: NEW SPAN OPTO-TECHNOLOGY, INC.            Topic: AF08T001

    Two-dimensional (2D) visualization techniques have limit capacity to achieve understanding of full dimensionality of the battlefield. Rewritable 3D holographic storage is promising for updatable 3D display applications. In Phase I, New Span Opto-Technology has demonstrated novel concepts of both holographic recording technique and recording material system without the use of high voltage. We have ...

    STTR Phase II 2010 Department of DefenseAir Force
  5. Multifunctional Nanocomposite Structures Via Layer-by-Layer Assembly Process

    SBC: Nico Technologies Corp.            Topic: AF09BT36

    The realization of materials with record mechanical and electrical properties is of paramount importance to the Air Force and other branches of the US Armed Forces. Layer-by-layer (LBL) assembly is capable of producing nanocomposite materials with record properties surpassing those made by many traditional composite preparation techniques. However the process is time consuming and typically yiel ...

    STTR Phase I 2010 Department of DefenseAir Force
  6. Eye-safe Optically-Pumped Gas-filled Fiber Lasers

    SBC: Precision Photonics Corporation            Topic: ARMY08T021

    An eye-safe optically pumped laser based on a gas-filled hollow optical fiber will be demonstrated to lase at both near infrared (IR) and mid IR wavelengths. These lasers will be the first in a new class of IR lasers, based on the combination of hollow-f

    STTR Phase II 2010 Department of DefenseArmy
  7. Development of Multi-Frequency Multi-Scale Radiation Transport Modeling

    SBC: Prism Computational Sciences, Inc.            Topic: AF08T020

    The objective of this proposal is to develop advanced radiation transport modeling techniques that accurately and efficiently treat transport in media having widely varying optical properties; in particular, hot gases and plasmas with optical depths ranging from the optically thin to the optically thick regimes. We will develop a hybrid diffusion-Monte Carlo (HDMC) model that efficiently transpor ...

    STTR Phase II 2010 Department of DefenseAir Force
  8. Probabilistic Prediction of Location-Specific Microstructure in Turbine Disks

    SBC: SCIENTIFIC FORMING TECHNOLOGIES CORPORATION            Topic: N10AT028

    While there are established methods available in determining the fatigue life of critical rotating components, there is still room for improvement for better understanding and prediction of life limiting factors. Improved risk assessment of jet engine disk components would require probabilistic modeling capability of the evolution of microstructural features, residual stresses and material anomali ...

    STTR Phase I 2010 Department of DefenseNavy
  9. Modeling Spin Test Using Location Specific Material Properties

    SBC: SCIENTIFIC FORMING TECHNOLOGIES CORPORATION            Topic: AF08T013

    Jet engine disk components are increasingly subjected to higher operating temperatures. To meet the demands of increasing thrust and higher operating temperatures, a newer generation of nickel based superalloys such as LSHR, Alloy 10, Rene104 and RR1000 are being processed with dual microstructure distributions. Fine grain, high strength, fatigue resistant bore properties are contrasted with co ...

    STTR Phase II 2010 Department of DefenseAir Force
  10. Contamination-free, Ultra-rapid Reactive Chemical Mechanical Polishing (RCMP) of GaN substrates

    SBC: Sinmat Inc            Topic: MDA09T001

    Gallium Nitride (GaN) substrates are ideal materials for fabrication of high-power and high-frequency devices based on III-V materials. The current state-of-the-art Chemical Mechanical Polishing (CMP) methods are plagued by several challenges, including, surface charge affects due to surface contamination, and sub-surface damages, which can limit the quality of III-V devices. Furthermore, there is ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government