List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. N/A

    SBC: PROCESS INSTRUMENTS, INC.            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseMissile Defense Agency
  2. N/A

    SBC: BIPOLAR TECHNOLOGIES            Topic: N/A

    N/A

    STTR Phase I 2000 Department of DefenseMissile Defense Agency
  3. Fiber-Optic Raman Analysis for Composites and Solid Rocket Motors

    SBC: PROCESS INSTRUMENTS, INC.            Topic: N/A

    We propose developing a compact, optical fiber-based Raman scattering instrument for rapid, in-situ analysis of composites, solid rocket motors, and propellants. The instrument will incorporate diode laser-based, full-spectrum Raman scattering forcontinuous in-situ remote monitoring of the composite and propellant chemistry. Narrow well defined Raman peaks and lack of sample preparation requirem ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  4. Development of a SiC Micro-Evaporator for Evaporative Cooling of GaN Power Amplifiers

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research Phase 1 project will develop novel devices capable of actively cooling high power electronics using ceramic micro-channel evaporatos. Microelectronics with demanding thermal management characteristics are usedpredominantly as microprocessors and power electronics (HDTV modules, higher power logic and power transmit/receive). The number of microprocessors so ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  5. Composite Heat Pipe Baseplates for Thermal Management of T/R Modules

    SBC: JW COMPOSITES, LC            Topic: N/A

    Thermal managment of T/R modules requires new materials to reduce the thermal resistance between the high frequency amplifiers and the module cooling system. We are proposing to construct a heat pipe evaporator as the baseplate of a T/R module using a newcomposite material with low CTE and high thermal conductivity. Aligned fibers both within the composite material as well as within the heat pip ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  6. Terahertz Time Domain Spectroscopy: An novel approach for finding cracks in composite materials

    SBC: Nomadics, Inc.            Topic: N/A

    The utilization of composite materials is vital in achieving the objectives of our nation's missile defense programs. However, composite materials can develop micro-cracking and other flaws that are difficult to detect. The need fornon-destructive-testing (NDT) and evaluation (NDE) of composite materials is critically important as structural integrity must be monitored in missile systems while at ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  7. Small Payload Support Module

    SBC: ONE STOP SATELLITE SOLUTIONS, INC.            Topic: N/A

    One Stop Satellite Solutions (OSSS) has been designing, building, testing and flying space structures to support small-satellite missions for over twenty years. Even with the use of 'Cold War' assets such as the Minotaur launch vehicle, lowering of launchcosts can only be achieved by fully loading the rocket with maximum payload. Small satellite payloads come in many shapes and sizes so the solu ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  8. Fiber-Optic Raman Analysis for Health Monitoring of Solid Rocket Motors Used in the GMD Program

    SBC: PROCESS INSTRUMENTS, INC.            Topic: N/A

    We propose developing a compact, optical fiber-based Raman scattering instrument for rapid, in-situ health monitoring and analysis of solid rocket motors and propellants relied on for the Ground-based Midcourse Defense (GMD) program. The instrument willincorporate diode laser-based, full-spectrum Raman scattering for continuous in-situ remote monitoring of the composite and propellant chemistry. ...

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
  9. Advanced, Reinforced-NZP Composites for Ballistic Missile Components & Structures

    SBC: SMAHT CERAMICS, INC.            Topic: MDA04041

    The next generation of ballistic missiles will require materials which are light-weight and have high-temperature resistance to withstand heating caused by the extreme velocity and harsh environments. In general, ceramic materials satisfy the above requirements for missile applications. More specifically, ceramic matrix composites (CMCs) comprising matrices and fibers which have good thermo-mech ...

    SBIR Phase I 2004 Department of DefenseMissile Defense Agency
  10. Advanced Infrared (IR) Sensor Components for Missile Defense

    SBC: Nanolight, Inc.            Topic: MDA06T011

    The objective of this proposal is to further explore PbSnSe detector array on Si substrate. Two approaches are proposed. One is a zero-risk incremental advance that employs a new growth condition to reduce the dislocation density. Another approach is a novel fabrication technique with high-risk but it could enable revolutionary rather than evolutionary advances. IV-VI semiconductors such as Pb1-x ...

    STTR Phase I 2006 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government