List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. AN ELECTRON BOMBARDED SEMICONDUCTOR DEVICE

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    N/A

    SBIR Phase I 1991 Department of Energy
  2. "MILD GASIFICATION IN TRANSPORT REACTORS"

    SBC: Advanced Fuel Research, Inc.            Topic: N/A

    THERE HAS BEEN RECENT INTEREST IN THE SMALL SCALE PRODUCTIONOF LIQUIDS FROM COAL BY MILD GASIFICATION WHICH CAN BE INTEGRATED INTO THE CURRENT ENERGY INFRASTRUCTURE. WHILE MOST WORK ON MILD GASIFICATION IS ADDRESSING DENSE PHASE REACTORS OR LARGE PARTICLES, SEVERAL LABORATORIES REPORT THAT FLASH PYROLYSIS USING SMALL PARTICLES IN DISPERSED-PHASE REACTORS PRODUCES A HIGHER YIELD (SOMETIMES TWO TO T ...

    SBIR Phase II 1991 Department of Energy
  3. FT-IR INSTRUMENTATION FOR SOLAR CHEMICAL AND PHYSICAL PROCESSES

    SBC: Advanced Fuel Research, Inc.            Topic: N/A

    THE U.S. EPA ESTIMATES THAT 290 MILLION TONS OF HAZARDOUS WASTE ARE PRODUCED ANNUALLY IN THE U.S. THE MOST PROMISING METHOD FOR THE PERMANENT DISPOSAL OF ORGANIC WASTES IS HIGH-TEMPERATURE INCINERATION. WHILE SOLAR INCINERATION OFFERS SIGNIFICANT PROMISE AS A WASTE DISPOSAL TECHNOLOGY, THERE IS A STRONG NEED FOR ON-LINE AND IN-SITU DIAGNOSTICS DURING THE DEVELOPMENT OF THE PROCESS AND FOR EVENTUAL ...

    SBIR Phase II 1991 Department of Energy
  4. IN-SITU FOURIER TRANSFORM-INFRARED DIAGNOSTIC TECHNIQUES FORCOAL LIQUEFACTION PROCESSES

    SBC: Advanced Fuel Research, Inc.            Topic: N/A

    FOR THE CONTINUED DEVELOPMENT OF COAL LIQUEFACTION PROCESSES, ON-LINE DIAGNOSTIC TECHNIQUES ARE NEEDED THAT ALLOW ONE TO "SEE" INSIDE THE VARIOUS PROCESS STAGES AND MONITOR PARAMETERS SUCH AS CATALYST ACTIVITY, UPGRADING OF LIQUIDS, DEPLETION OF SOLVENT, HETEROATOM REMOVAL, ETC. THIS PROJECT IS BASED ON TWO INNOVATIONS. THE FIRST IS THE APPLICATION OF FOURIER TRANSFORM-INFRARED (FT-IR) DIAGNOSTICS ...

    SBIR Phase I 1991 Department of Energy
  5. A PORTABLE, PULSED MHD POWER SUPPLY FOR GEOPHYSICAL MAPPING

    SBC: Coal Tech Corp.            Topic: N/A

    THE OBJECTIVE OF THIS PROJECT IS TO APPLY TO GEOPHYSICAL MAPPING A NOVEL POWER SOURCE CONSISTING OF A MAGNETOHYDRODYNAMIC (MHD) GENERATOR DRIVEN BY A CHEMICALLY HEATED, NONEQUILIBRIUM GAS PLASMA. THIS APPLICATION REQUIRES 1 TO 3 MWE POWER PULSES OF 10- TO 30-SEC DURATION REPEATED SEVERAL TIMES PER HOUR. A COMBUSTOR DIRECTLY HEATSTHE MHD WORKING GAS TO CONDITIONS AT WHICH VERY HIGH POWER DENSITIES ...

    SBIR Phase I 1991 Department of Energy
  6. AN EFFICIENT LAGRANGIAN METHOD FOR THE COMPUTATION OF THREE-DIMENSIONAL REACTIVE FLOWS ON CONCURRENT COMPUTERS

    SBC: Continuum Dynamics Inc            Topic: N/A

    N/A

    SBIR Phase I 1991 Department of Energy
  7. "EVALUATION OF EROSION RESISTANCE IN A SIMULATED FBC ENVIRONMENT OF COATINGS APPLIED USING A HYPERSONIC SPRAY PROCESS"

    SBC: Manhattan Turbine Corp            Topic: N/A

    IT HAS BEEN DEMONSTRATED THAT COATINGS DEPOSITED BY A RECENTLY-DEVELOPED PROCESS CALLED THE HYPERSONIC FLAME SPRAY PROCESS ARE HARDER, DENSER, AND LESS POROUS THAN COATINGS APPLIED BY PLASMA SPRAY OR CONVENTIONAL FLAME SPRAYTECHNIQUES. AS SUCH, THIS PROCESS HAS THE POTENTIAL TO APPLY COATINGS ONTO THE SURFACE OF FBC SUPERHEATER TUBES WHICH ARE MUCH MORE RESISTANT TO EROSION THAN EXISTING COATINGS. ...

    SBIR Phase II 1991 Department of Energy
  8. A MORE ECONOMICAL LOW LOSS NB3SN FOR PULSED FIELD APPLICATIONS, MADE BY A MODIFIED "INTERNAL TIN" PROCESS.

    SBC: Intermagnetics General Corp            Topic: N/A

    THE AIM OF THE PROPOSED WORK IS TO MODIFY THE "INTERNAL TIN"PROCESS TO PROVIDE AN ECONOMICAL, HIGH JC, NB3SN MATERIAL WITH LOW LOSSES IN PULSED FIELD APPLICATIONS. IT WILL BE MANUFACTURED IN THE UNITED STATES TO COMPETE WITH THE OVERSEAS SUPPLIERS OF BRONZE PROCESSED MATERIAL WHICH HAS A HIGHER COST AND LOWER PERFORMANCE CAPABILITY. IGC/ASI HAS BEEN DEVELOPING THE INTERNAL TIN PROCESS FOR THEMANUF ...

    SBIR Phase II 1991 Department of Energy
  9. CHANGES IN NB3SN CONDUCTORS MADE BY THE "INTERNAL TIN" METHOD, TO IMPROVE MAGNET PERFORMANCE.

    SBC: Intermagnetics General Corp            Topic: N/A

    AS RESULT OF A DEVELOPMENT PROGRAM CARRIED OUT OVER A PERIOD OF MANY YEARS, IGC/ASI HAS BEEN ABLE TO PRODUCE "INTERNAL TIN" MATERIAL IN LONG PIECE LENGTHS WITH FILAMENTSOF A VARIETY OF DIFFERENT COMPOSITIONS. HOWEVER, A LACK OF CONFIDENCE IN THE ABILITY OF NB3SN TO PERFORM RELIABLY IN A RANGE OF DIFFERENT MAGNET DESIGNS EXISTS IN THE MINDS OF MANY MAGNET BUILDERS, MAKING IT VERY DIFFICULT TO COMME ...

    SBIR Phase II 1991 Department of Energy
  10. IMPROVEMENT OF THE PROPERTIES OF TERNARY NIOBIUM-TITANIUM- TANTALUM ALLOYS

    SBC: Intermagnetics General Corp            Topic: N/A

    THIS WORK IS DESIGNED TO CARRY OUT A COMPREHENSIVE INVESTIGATION OF MULTIFILAMENTARY MATERIALS CONTAINING NIOBIUM-TITANIUM-TANTALUM (NBTITA) ALLOYS TO DETERMINE THE ADVANTAGES THAT THESE MATERIALS OFFER OVER THOSE CONTAINING NBTI BINARY ALLOYS IN 1.8 K AND 4.2 K OPERATION. THE PHASE I WORK CONCENTRATES ON THE NB-44 WT.% TA ALLOY BECAUSE OF ITS AVAILABILITY; THE ALLOY'S PROPERTIES ARE BEING COMPARE ...

    SBIR Phase I 1991 Department of Energy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government