List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Non-collinear Wave-front Curvature Range Measurement

    SBC: MIKEL, INC.            Topic: N/A

    The U.S. submarine force strongly desires an improved situational awareness and a collision avoidance capability based on intercept of active emissions and detection of passive broadband signals. Our Phase I SBIR focused on the development of rapid 3D(range, bearing and depth) localization solution against active emissions detected on existing submarine sensors. The results of our Phase I study sh ...

    SBIR Phase I 2003 Department of DefenseNavy
  2. Non-collinear Wave-front Curvature Range Measurement

    SBC: MIKEL, INC.            Topic: N/A

    The U.S. submarine force strongly desires an improved situational awareness and a collision avoidance capability based on intercept of active emissions and detection of passive broadband signals. Our Phase I SBIR focused on the development of rapid 3D(range, bearing and depth) localization solution against active emissions detected on existing submarine sensors. The results of our Phase I study sh ...

    SBIR Phase II 2003 Department of DefenseNavy
  3. Polymer-Cased Ammunition for Small Arms and Cannon Ammunition

    SBC: MISSISSIPPI POLYMER TECHNOLOGIES, INC.            Topic: N/A

    Mississippi Polymer Technologies Inc. (MPT) proposes to develop a new generation of polymeric lightweight ammunition for the use by the services. Previous efforts to develop polymer cased ammunition have failed primarily because of problems associatedwith choice of case materials. During Phase I, MPT will execute a thorough survey of the available polymers and processing techniques, followed by ...

    SBIR Phase I 2003 Department of DefenseNavy
  4. High Performance Object Oriented Software for Parallel Embedded Systems

    SBC: MPI SOFTWARE TECHNOLOGY, INC.            Topic: N/A

    This Phase 1 SBIR Proposal entitled

    SBIR Phase I 2003 Department of DefenseAir Force
  5. Optoelectronic Chip-to-Chip Interconnect Technology Development for Radiation Hard Space Applications

    SBC: OPTICOMP CORP.            Topic: N/A

    The primary goal of the proposed Phase II SBIR effort is to develop and fabricate high-speed interconnects utilizing GaAs-based monolithic switching modules and hybrid waveguides in order to relieve the chip-to-chip interconnect bottleneck. The switchingmodules include VCSELs and resonant cavity photodetectors with on-chip multiplexing/demultiplexing. These high-speed interconnects are realized ...

    SBIR Phase II 2003 Department of DefenseAir Force
  6. High Channel Density Interconnect Modules for Air Platforms

    SBC: OPTICOMP CORP.            Topic: N/A

    The primary goal of the proposed Phase I SBIR effort is to develop high channel-density interconnect modules for use in air platforms. This will be accomplished using a unique, monolithic, WDM, optoelectronic module that has a high interconnect density,small form-factor, and is rugged enough to withstand harsh operating environments. OptiComp Corporation occupies a 7,000 square foot facility, wh ...

    SBIR Phase I 2003 Department of DefenseAir Force
  7. Built-In-Test (BIT) Fiber-Optic Transceiver Circuit

    SBC: OPTICOMP CORP.            Topic: N/A

    The primary goal of the proposed Phase I SBIR effort is to investigate various schemes for implementing a built-in test circuit using integrated optoelectronic modules. The circuit will be implemented using OptiComp's (OCC) advanced optoelectronic moduleswhich monolithically integrate VCSELs, detectors, and interconnecting waveguides. Using these unique optoelectronic circuits, advanced built-in ...

    SBIR Phase I 2003 Department of DefenseNavy
  8. Heat Storage and Temperature Amplification for Space-Based Laser Diode Cooling

    SBC: Rocky Research            Topic: N/A

    Solid-state lasers are attractive for space-based and airborne applications such as target illumination and weapons, but heat must be removed for continuous operation. Laser cooling involves three problems: (1) heat removal from the laser diode, (2) heattransport for rejection, and (3) heat rejection to space. High-power lasers require heat removal capability equal to maximum reject power, alth ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  9. Ammonia Storage as Complex Compounds for a Safe and Compact Hydrogen Source

    SBC: Rocky Research            Topic: N/A

    Ammonia is an attractive media for storing hydrogen for fuel cells because it exceeds 17% hydrogen by weight and leaves only nitrogen after decomposition and hydrogen removal. Safety questions related to the relatively high vapor pressure of ammonia canbe alleviated if ammonia is stored on an absorbent. Complex compounds are the best absorbents for ammonia, in that they have extremely high stora ...

    SBIR Phase I 2003 Department of DefenseArmy
  10. Thermoelectric Water Heater and Chiller

    SBC: Rocky Research            Topic: N/A

    The Army needs a thermoelectric water cooler and heater for the future combat vehicle. The appliance must simultaneously cool drinking water, and heat water for preparing Meals Ready to Eat (MREs). The heat balance for simultaneous heating and coolingonly works exactly for one set of starting hot and cold water temperatures. Proposed is a device with a unique thermal coupling process between th ...

    SBIR Phase I 2003 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government