You are here
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
SBC: Drf R&d, Inc. Topic: N/A
It is proposed to develop a miniature guarded hot plate apparatus that can be used to determine the thermal conductivity or thermal resistance of very small specimens (1 to 3 cm square) of thermal insulation materials over a temperature range from at least -40 degrees Celsius to +65 degrees Celsius, with the apparatus having the capability to carry out measurements under controlled environments of ...SBIR Phase I 1995 Department of Commerce
SBC: Rise Topic: N/A
The purpose of this Phase I proposal is to investigate the feasibility of developing a comprehensive Failure Engineering and Analysis Toolkit (FEAT) that can be seamlessly integrated with a variety of data tools over ODBC/SQL. The research will focus on mechanical parts failure data and analysis for both the production and design stages of a product's life cycle. Elements of FEAT will include a ...SBIR Phase I 1995 Department of Commerce
SBC: Spire Corporation Topic: N/A
A fire fighter's ability to effectively combat fire is strongly dependant on the degree to which his clothing limits exposure to heat and flame. Available heat- and flame-retardant garments significantly increase exposure, but use environmentally hazardous additives; additionally, further enhancements in flame-retardation are deisred. Recent research at Oak Ridge National Laboratory and elsewher ...SBIR Phase I 1996 Department of Commerce
SBC: Airborne Research Associates Topic: N/A
The ultimate objective of this project is to develop an instrument capable of remote detection and location of tornadoes and/or storms containing tornadoes. There are many reports, both scientific and anecdotal, suggesting that tornadoes and tornadic thunderstorms emit anomalous electromagnetic (EM) radiation-both RF and luminous. This radiation is characterized by unusually high rates of EM pulse ...SBIR Phase I 1997 Department of Commerce
SBC: Advanced Microscopy Techniques Topic: N/A
Microscopic measurement of surface topography is a continuing need in microfabrication technology and materials research. The aim of this research is to adapt the scanning electron microscope (SEM) to the quantitative measurement of a wide range of surface structures. The SEM is a widely used measurement tool in materials science and semiconductor fabrication. The SEM's strength is that it prov ...SBIR Phase I 1995 Department of Commerce
SBC: SOUTHWEST SCIENCES INC Topic: N/A
A diode laser method for the real-time measurement of absolute flux concentrations and spatial profiles of atomic beams used in MBE will be tested. The proposed method uses the doubled output of a near-infrared diode laser to access atomic absorption lines of species such as Ga, Al and In. The detection method will combine high frequency wavelength modulation and noise canceler approaches in order ...SBIR Phase I 1997 Department of Commerce
SBC: HUGHES ASSOC., INC. Topic: N/A
Fire fighter burn injuries continue to be a frequent problem despite significant advances in protective clothing. A reason for this is the buildup of moisture in fire fighting garments as a result of sweating or fire fighting activities. This buildup of moisture increases the heat transfer through the garment and can result in scald burn injuries as the water is quickly heated. Currently, there is ...SBIR Phase I 1997 Department of Commerce
SBC: Innovative Tech. Solutions Topic: N/A
N/ASBIR Phase I 1995 Nuclear Regulatory Commission
Development of an Ultrasonic System for the Reliable Detection and Sizing of Sustained Load Cracks in Aluminum CylindersSBC: Matec Instruments, Inc. Topic: N/A
The feasiblity of developing a PC based, pulsed ultrasonic test system for the economical and reliable testing of aluminum cylinders for sustained load cracking is addressed. A system consisting of a host PC, ultrasonic pulser/receiver and data acquisition hardware, control and analysis software, and transducer fixture for accurate positioning is proposed. In addition to the system development, ...SBIR Phase I 1995 Department of Commerce
SBC: Stillwater Sciences, L.L.C. Topic: N/A
This proposal describes a new research program to be established at the small business Still Sciences, LLC, in collaboration with Department of Physics of Oklahoma State University. The overall goal is to develop and commercialize an all-optical dosimetry system for industrial radiation processing based on a novel Pulsed Optically Stimulated Luminescence readout technique and a new Al2O3 material ...SBIR Phase I 1997 Department of Commerce