You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Rotorcraft External Far-Field Noise Measurement Using a Hot Air Balloon

    SBC: DELTA GROUP INTERNATIONAL LLC            Topic: A14AT001

    A novel and new method of measuring the far-field noise of a helicopter is proposed by the Delta Group International/University of Maryland team that uses a hot-air-balloon as the measurement platform. The method meets the Army STTR objectives of being capable of measuring helicopter noise above and near the tip-path-plane of the helicopter without measurable ground reflections. The new method i ...

    STTR Phase I 2014 Department of DefenseArmy
  2. Superconducting Parametric Amplifier

    SBC: HYPRES INC            Topic: A14AT010

    HYPRES, in collaboration with MIT Lincoln Laboratory and ISQC, proposes to transition superconducting parametric amplifier technology into a robust line of products. In Phase I, we will develop three varieties of superconducting low-noise amplifiers (LNAs) in compact cryogenic microwave packages. These are two types of standing wave devices, lumped-element Josephson parametric amplifier (LJPA) and ...

    STTR Phase I 2014 Department of DefenseArmy
  3. Robust Terrain-Adaptive Vehicle Planning and Control

    SBC: Quantum Signal LLC            Topic: A14AT018

    Autonomous or teleoperated navigation of unmanned ground vehicles (UGVs) is difficult even in benign environments due to challenges associated with perception, decision making, and human-machine interaction, among others. In environments with rough, sloped, slippery, and/or deformable terrain, the difficulty of the navigation problem increases dramatically. In this effort, Quantum Signal, LLC, Un ...

    STTR Phase I 2014 Department of DefenseArmy
  4. Liquid Crystal-based Sensors for Detection of Airborne Toxic Chemicals for Integration with Unmanned Robotic Systems

    SBC: PLATYPUS TECHNOLOGIES LLC            Topic: A13AT004

    In Phase I we successfully reached all goals and milestones in developing liquid crystal sensors that detected 100 ppb of each of four target gases (DMMP, hydrogen sulfide, nitrogen dioxide and ammonia) within 60 seconds. In Phase II, we propose to expand this detection capability to a total of seven gases, adding volatile organic compounds, chlorine and half-mustard to the set. We then propose ...

    STTR Phase II 2014 Department of DefenseArmy
  5. Solar Blind MgZnO Photodetectors

    SBC: AGNITRON TECHNOLOGY, INC.            Topic: A13AT006

    This project address the fabrication of solar blind detectors from the MgZnO material system. Both MBE and MOCVD material growth techniques will be used for deposition of the required material layers. Simulation software we be used to aid in the design of the photodetector structure. Devices will be fabricated from the grown structures and their electrical and optical characteristics determined.

    STTR Phase II 2014 Department of DefenseArmy
  6. Inferring Social and Psychological Meaning in Social Media

    SBC: SECURBORATION, INC.            Topic: A12aT009

    The rapid ascent and adoption of social media as the dominant form of communication has led to significant analysis challenges. In particular, there is a gap in theoretically informed methods to analyze data mined and collected from social media. One primary cause of this gap is the lack of fusing structural sources of information (e.g. social network topology) with non-structural sources (message ...

    STTR Phase II 2014 Department of DefenseArmy
  7. Formalism for Millimeter-wave Modeling of RADAR Cross Sections

    SBC: EMAG TECHNOLOGIES INC.            Topic: A12aT002

    In this STTR proposal, we propose a novel computational technology for analyzing millimeter wave and sub-millimeter wave scattering from complex and electromagnetically extended objects and environments. The core of our formalism lies in a technique for rapidly calculating and coherently adding fields produced by different scatterer constituents, ranging from conducting, flat surfaces to penetrabl ...

    STTR Phase II 2014 Department of DefenseArmy
  8. Ultra-strong and Ultrahigh Conductive Metal/CNT Composites by Electrochemical Co-Deposition and Processing

    SBC: ULTRACONDUCT            Topic: N14AT017

    The goal of this project is to develop processing capabilities for high-strength and ultra-conductive wires to improve power-to-weight ratios and energy efficiency of electrical military systems. The first objective of this Phase I project is to build up quantitative microstructure-property models to guide the development of electrical and thermal conductive carbon nanotubes (CNTs) modified coppe ...

    STTR Phase I 2014 Department of DefenseNavy
  9. Fabrication of Ta-Hf-C-based Ultra High Temperature Composites

    SBC: UES INC            Topic: MDA09T002

    This Phase II STTR program seeks a new fabrication method to produce stronger (>100 kpsi) and tougher (>10 MPam1/2) ultra-high temperature HfC-based composites (UHTC) with an outstanding oxidation resistance for advanced rocket nozzle throat components. UES will apply a novel"Top Down"approach to control the microstructures of the composites. This approach will produce a very unique grain structur ...

    STTR Phase II 2014 Department of DefenseMissile Defense Agency
  10. Integrated Computational Material Engineering Approach to Additive Manufacturing for Stainless Steel (316L)

    SBC: SENVOL LLC            Topic: N16AT022

    The objective in this project is to implement and validate a probabilistic qualification framework that will enable additive manufacturing (AM) materials and part qualification through the use of a data-driven predictive model within a statistical framework. Senvol seeks to develop and validate a data-driven ICME probabilistic framework for assisting qualification of AM materials and parts. Phase ...

    STTR Phase II 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government