You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Ultra High Repetition Rate Multi-Parameter Imaging Diagnostics for Reacting Flows

    SBC: Orbital Technologies Corporation            Topic: AF11BT16

    ABSTRACT: ORBITEC will develop a new diagnostic to acquire simultaneous planes of velocity and temperature data at very high repetition rates. This diagnostic relies on a novel pulse burst laser system, a phosphor thermometry technique, and the mature PIV method. The work plan will involve developing and testing the laser, refining the integrated technique, and demonstrating it in a supersonic ...

    STTR Phase II 2014 Department of DefenseAir Force
  2. Innovative Polishing Technology for Fabrication of High Performance Epi-ready GaSb Substrates

    SBC: Sinmat Inc            Topic: MDA12T003

    Antimony containing III-V semiconducting compounds are particularly attractive for the fabrication of a wide variety of electronic and optoelectronic devices such as photo detectors operating in the long wave infrared wavelength (12-32µm) range. The production of epi quality GaSb wafers still remains one of the important problems for rapid commercialization of GaSb devices. In Phase I effort, we ...

    STTR Phase II 2014 Department of DefenseMissile Defense Agency
  3. Synthesis of New, Insensitive Energetic Materials

    SBC: Orbital Technologies Corporation            Topic: N11AT034

    Advanced ordnance and propulsion systems utillize materials, such as RDX and HMX, that provide good performance but cannot meet todays more stringent safety and environmental requirements. Unfortunately, in newer compounds created to replace them, the performance falls with the sensitivity. The ORBITEC team proposes the development of new energetic materials that will be both high performance and ...

    STTR Phase II 2013 Department of DefenseNavy
  4. Dual S & C-Band Telemetry Transmitter System for Missile Testing

    SBC: Quasonix, LLC            Topic: MDA11T004

    Missile flight test telemetry has been performed at S band (2200 2395 MHz) since the 1960s. In 2007, Department of Defense test ranges acquired access to new C-band frequency ranges (4400 4950 and 5091 5150 MHz). While these new bands offer a substantial increase in the total bandwidth available for flight test telemetry, traditional S-band operations will continue for many years, due in part ...

    STTR Phase II 2014 Department of DefenseMissile Defense Agency
  5. Precise Positioning with Local Signal Carrier Phase Measurements and Global Positioning System (GPS) Fusion

    SBC: GIRD SYSTEMS INC            Topic: N14AT009

    Carrier phase measurements in GPS are well known to enable precision performance. However, GPS is easily degraded or jammed. Carrier phase measurements in a local radio system, on the other hand, is much easier due to its much stronger signal level compared with GPS. In this proposal GIRD Systems will investigate feasibility of precise positioning techniques based on carrier phase measurements fr ...

    STTR Phase I 2014 Department of DefenseNavy
  6. 3-D nondestructive imaging techniques for mesoscale damage analysis of composite materials

    SBC: Multiscale Design Systems, LLC            Topic: AF11BT04

    ABSTRACT: An experimental and computational effort is proposed to develop a data-driven experimentally-validated framework for analysis of plastically bonded energetic materials at meso and micro scales. A unique data-mining strategy and model reduction technology based on thermodynamics and manifold learning techniques and on nonlocal dispersive reduced order model will be devised. Reduced order ...

    STTR Phase II 2013 Department of DefenseAir Force
  7. Automated Approaches to Cellular Engineering and Biomanufacturing

    SBC: Covitect Inc.            Topic: ST12B003

    Genome-scale predictable cellular design and engineering of biomanufacturing systems is the overarching goal of DARPAs Living Foundries and 1000 Molecules programs and, if realized, will enable rapid engineering of living systems for a broad range of applications in biotechnology and pharmacology. However, constructing living cells with designed genome is an arduous task that is severely limited ...

    STTR Phase II 2014 Department of DefenseDefense Advanced Research Projects Agency
  8. Development of Characterization of Failure Modes for Mechanical Components

    SBC: Thornton Tomasetti, Inc.            Topic: N14AT011

    This proposal describes a new process to facilitate the shock qualification of submarine components, taking advantage of the similarities between readily observable design features of these components, and correlating them to success or failure in Navy shock qualification tests. To realize this Design Feature Similarity (DFS) approach, we will develop a set of criteria based on this type of readil ...

    STTR Phase I 2014 Department of DefenseNavy
  9. Computing With Chaos

    SBC: FirstPass Engineering PC            Topic: N12AT013

    Our initial, practical and potentially commercial approach, based upon years of basic and applied research in chaotic computation, was developed in Phase I of our project. Following upon phase I of the STTR project we propose, in Phase II, to engineer, synthesize, and exploit the rich, intrinsic dynamics of nonlinear and chaotic circuits and systems to implement reconfigurable, secure and noise re ...

    STTR Phase II 2014 Department of DefenseNavy
  10. Durable Elastomeric Low Adhesion Icephobic Surfaces

    SBC: HYGRATEK LLC            Topic: N14AT013

    In this Phase I effort, HygraTek will explore a novel anti-ice coating formulation to develop icephobic surfaces for naval ship superstructures, decks, equipment and vehicles on board naval ships, e.g. fighter jets, helicopters etc. HygraTek has recently developed a series of different environmentally safe, non-fluorinated, transparent, icephobic coatings. These coatings display the lowest ice-adh ...

    STTR Phase I 2014 Department of DefenseNavy
US Flag An Official Website of the United States Government