You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Investigation of Optimum Logic & Algorithms for Airborne Use of Instantaneous Frequency Measurement Receivers in the Look-Through Mode

    SBC: SenSyTech, Inc. Imaging Group            Topic: N/A

    1.1 Technical Abstract: S.T. Research proposes to develop optimgic, algorithms, and processing speeds for airborne use of IFM receivers in the LT mode of operation. The effect of LT on IFM pulse processing is not well documented, and a thorough analysis of these effects, and solution of the problems caused by the LT process is the goal of this SBIR effort. S.T. Research Corp. has dev ...

    SBIR Phase I 1997 Department of DefenseNavy
  2. Wideband Fast Switched RF Synthesizer

    SBC: SenSyTech, Inc. Imaging Group            Topic: N/A

    The current market for fast switching frequency sythesizers is growing rapidly. Most synthesizers available today will not meet the stringent requirements for switching quickly, providing spectrally pure RF outputs and minimizing physical size and cost. As part of a current SBIR program, S.T. Research has developed a wideband, fast switching synthesizer, based on the use of broadband phase-locke ...

    SBIR Phase I 1997 Department of DefenseArmy
  3. Manufacturing Technology for the APOBS System

    SBC: Saa International, Ltd.            Topic: N/A

    If the APOBS system is to be deployed and proliferated, it must be inexpensive to produce. The key to efficient manufacture is to understand the short term launch acceleration loads and long term temperature and material creep forces to which the system will be subjected. Then configure a simple attachment scheme which ensures high reliability and high speed production. In order to successfu ...

    SBIR Phase I 1997 Department of DefenseNavy
  4. Inductive Vehicle Identification System

    SBC: SCENTCZAR CORP.            Topic: N/A

    Project will develop an inexpensive vehicle identification system capable of identifying vehicles at speeds from 0 to 85 miles per hour using a conventional inductive loop or an overhead reader. System will have the following characteristics: 1) compatible with existing vehicle detector inductive loops already installed at many facilities minimizing implementation costs, 2) utilize low frequency ...

    SBIR Phase I 1997 Department of DefenseAir Force
  5. An Investigation of a Faster High Intensity Radiated Fields (HIRF) Aircraft Testing Techniques

    SBC: SCIENCE & ENGINEERING ASSOC., INC.            Topic: N/A

    A feasibility investigation is proposed for designing a HIRF aircraft test facility which reduces existing test time by at least a factor of two without comprising the HIRF requirements for aspect angle/polarization and field strengths (both average and peak). SEA proposes a hybrid TEM cell/reverberation facility which will reduce test time involved with repositioning test equipment or test ...

    SBIR Phase I 1997 Department of DefenseNavy
  6. The Development of a Fieldable Laser Diode Wound Stabilization System

    SBC: SCIENCE & ENGINEERING ASSOC., INC.            Topic: N/A

    With the development of compact, rugged laser diodes that can be powered with bateries, it appears that medical procedures that utilize lasers can now be brought into the field environment. The goal of this effort is to develop a fieldable laser diode tissue soldering system for wound stabilization. In this technique, a laser is used to thermally cure a protein solution placed onto a wound. Thi ...

    SBIR Phase I 1997 Department of DefenseAir Force
  7. Modeling the Effects of Gamma Irradiation Electro-Optic Components

    SBC: SCIENCE & ENGINEERING ASSOC., INC.            Topic: N/A

    The USAF Material Command (AFMC) and the Defense Logistics Agency (DLA), Defense Microelectronics Activity (DMA) has a critical need to support military planners in establishing a cost effective approach to selecting components and identifying system behavior during the design process, minimizing expensive testing and design failures. Current test facilties are expensive to run as well as time co ...

    SBIR Phase I 1997 Department of DefenseAir Force
  8. Hypersonic Aerothermal Analysis Program for a Maneuvering Missile/Fighter Aircraft

    SBC: SCIENCE AND TECHNOLOGY CORPORATION            Topic: N/A

    Future USAF vehicles (missiles/fighter aircrafts) will have to operate under high altitude flight conditions in order to reach global targets and/or to meet unforeseen threats to the security of USA. A new accurate engineering code is needed to determine quickly the aerothermal characteristics of the vehicle and optimizeits shape, trajectory, and/or performance. The maneuvering vehicle will have ...

    SBIR Phase I 1997 Department of DefenseAir Force
  9. INFANT AND CHILD NUTRITION ANALYSIS TOOL

    SBC: Scientific & Tech Analysis            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of Health and Human Services
  10. DIGITAL MAMMOGRAPHY RADIOLOGY REVIEW STATION

    SBC: SSG, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of Health and Human Services
US Flag An Official Website of the United States Government