You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 201441 - 201450 of 207728 results
  1. UNDRAINED SHEAR BEHAVIOR OF SATURATED JOINTED ROCKS AT DEEP BASING CONDITIONS

    SBC: Terra Tek Inc.            Topic: N/A

    SHEAR DISPLACEMENT ALONG ROCK MASS DISCONTINUITIES (JOINTS) UNDER SATURATED, UNDRAINED CONDITIONS IS ONE OF THE CRITICAL FAILURE MODES FOR A DYNAMICALLY LOADED DEEP BASE STRUCTURE. THE FAILURE MODE HAS NOT BEEN EXPERIMENTALLY SIMULATED FOR DEEP BASE CONDITIONS. THE COMBINED APPLICATION OF NORMAL AND SHEAR STRESSES AT DYNAMIC RATES, WITHOUT PORE PRESSURE DRAINAGE, IS LIKELY TO PRODUCE HIGH PORE PRE ...

    SBIR Phase I 1987 Department of DefenseDefense Threat Reduction Agency
  2. ADVANCED CUTTER DEVELOPMENT FOR EGRESS BORING MACHINES

    SBC: Terra Tek Inc.            Topic: N/A

    CURRENT EGRESS BORING MACHINES, UTILIZING CONVENTIONAL 17-INCH DISC CUTTERS, ARE CAPABLE OF ACHIEVING MAXIMUM ADVANCE RATES OF 80 FEET PER HOUR, BECAUSE OF CUTTER LIMITATIONS. THE AIR FORCE HAS DETERMINED THAT NATIONAL NEEDS REQUIRE SUBSTANTIALLY FASTER BORING RATES. ALSO, IT IS CRUCIAL THAT THE CUTTERS BE CAPABLE OF COMPLETING THE EGRESS SHAFT, WITHOUT ANY MAINTENANCE/REPLACEMENT OF THE CUTTERS. ...

    SBIR Phase I 1987 Department of DefenseAir Force
  3. HIGH-EFFECTIVENESS ASCENDING THERMAL ENERGY REJECTION SYSTEM FOR SUBTERRANEAN APPLICATION

    SBC: Terra Tek Inc.            Topic: N/A

    DEEP-BASED ICBM SITES MUST BE MAINTAINED AT A CONSTANT WORKING TEMPERATURE FOR THE BENEFIT OF PERSONNEL AND SENSITIVE ELECTRICAL EQUIPMENT WITHIN THE FACILITY. HOWEVER, HEAT IS GENERATED WITHIN THE FACILITY FROM A VARIETY OF SOURCES AND THERE IS A NATURAL FLOW OF HEAT FROM THE WARM ROCK MASS SURROUNDING THE SITE INTO THE UNDERGROUNDSTRUCTURE. IT IS PROPOSED TO DESIGN AND TEST AN EFFICIENT SYSTEM O ...

    SBIR Phase I 1987 Department of DefenseAir Force
  4. NEW TECHNOLOGY IN THE USE OF HIGH TEMPERATURE COATINGS AS A REFERENCE FOR ULTRA HIGH TEMPERATURE STRAIN MEASURMENTS

    SBC: Terra Tek Inc.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseAir Force
  5. LABORATORY APPROACH TO EVALUATE THERMOMECHANICAL PROPER- TIES OF ROCK JOINTS

    SBC: Terra Tek Inc.            Topic: N/A

    N/A

    SBIR Phase I 1987 National Science Foundation
  6. SEAWATER SPLIT TRANSFORMER COUPLING MODEL

    SBC: Tetra Corporation            Topic: N/A

    IF A SPLIT TRANSFORMER IS EXPOSED TO SEA WATER, THE DEVICE MIGHT TRANSFER SIGNIFICANT AMOUNTS OF ENERGY TO THE SECONDARY EVEN IN THE SAFE POSITION. TETRA PROPOSES TO BUILD A COMPUTER MODEL OF THE COUPLING PROCESS WHICH WILL ACCOMMODATE EXTREMES OF TEMPERATURE, SALINITY AND CONTAMINANTS AND GEOMETRIES AND ORIENTATIONS. THE THEORETICAL APPROACH PROPOSED IS BASED ON CALCULATING THE MAGNETIZATION, CON ...

    SBIR Phase I 1987 Department of DefenseNavy
  7. HIGH POWER LOW IMPEDANCE LIGHT WEIGHT TRANSMISSION LINES

    SBC: Tetra Corporation            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseMissile Defense Agency
  8. MICROSTACK INSULATOR FOR HIGH VOLTAGE PULSED SYSTEMS

    SBC: Tetra Corporation            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseMissile Defense Agency
  9. NDE OF ADHESIVE BONDS

    SBC: TEXAS RESEARCH INSTITUTE , AUSTIN, INC.            Topic: N/A

    THE OVERALL GOAL OF THIS RESEARCH IS TO DEVELOP AN INNOVATIVE NONDESTRUCTIVE (NONINVASIVE) INSPECTION TECHNIQUE THAT CAN DETERMINE WHETHER OR NOT DURABLE ADHESIVE BONDS HAVE BEEN FORMED IN RUBBER-TOMETAL JOINTS AND WHETHER A BOND THAT HAS BEEN EXPOSED TO USE CONDITIONS CONTAINS ITS INTEGRITY. THE PHASE I EFFORT WILL IDENTIFY, DESCRIBE AND EVALUATE THE CONDITIONS FOR EXCITING BOND SENSITIVE ACOUSTI ...

    SBIR Phase II 1987 Department of DefenseNavy
  10. IMPROVED TRANSDUCER PRODUCTION TESTING FOR RUBBER-TO-METAL BONDED JOINTS

    SBC: TEXAS RESEARCH INSTITUTE , AUSTIN, INC.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseNavy
US Flag An Official Website of the United States Government