You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 201501 - 201510 of 207700 results
  1. Materials for Gravure Printing of Chemical Gas Sensors

    SBC: KWJ ENGINEERING INC            Topic: 2

    From 2012-2015 the world’s first printed amperometric gas sensors were developed at KWJ Engineering Inc. as the subject of an NSF SBIR. The patented technology was used to found SPEC-sensor LLC and obtain commercial funds. More than 1 million sensors have been sold and SPEC-sensor LLC is today a viable and growing stand-alone company. The next challenge is to grow sensor production output to 10- ...

    SBIR Phase I 2022 Department of CommerceNational Institute of Standards and Technology
  2. Establishing the Security of Ciphers Designed Using Statistical Physics Principles to Enable Direct Computation on Encrypted Data

    SBC: USENCRYPTION INC            Topic: 3

    This Project will investigate the security of a new block cipher first proposed by the Applicants and analyzed using theoretical physics techniques. This new block cipher: (i) is inspired by quantum circuit scramblers but implemented classically using reversible computing, (ii) is expected to be immune to quantum attacks, and (iii) enables direct computation on encrypted data in an alternative for ...

    SBIR Phase I 2022 Department of CommerceNational Institute of Standards and Technology
  3. Network Resilience to Cascading Failure

    SBC: CRITICALITY SCIENCES INC            Topic: 6

    Criticality Sciences, Inc. proposes to test the feasibility of a novel process embodied in NetResilience™ software, for estimating risk (expected loss) and resilience (e.g. recovery time and cost), and proposing mitigation (including during recovery) associated with cascading failure in an infrastructure network. The process will be applied to the interconnected water utility sector with a utili ...

    SBIR Phase I 2022 Department of CommerceNational Institute of Standards and Technology
  4. Innovative Emulsion Polymerization Manufacture of Dual-Function, Nanoscale, Calibration Spheres Over the Range of 100 to 400 nm Diameter

    SBC: COLLOIDAL METRICS CORPORATION            Topic: 2

    This proposal seeks to extend the Company’s existing ability to manufacture 100 nm polystyrene latex (PSL) size standards to include 200 and 400 nm latexes. We also propose to add accurate particle concentration data to all the size standards. A given, dual-function product will serve as both a size standard and a particle concentration reference material. Both these end uses require the latex p ...

    SBIR Phase II 2022 Department of CommerceNational Institute of Standards and Technology
  5. An Innovative Mass Spectrometer to Simplify Materials Characterization for Additive Manufacturing

    SBC: EXUM INSTRUMENTS, INC.            Topic: 2

    Exum Instruments’ Massbox is a single analytical instrument that offers rapid, high-sensitivity measurements of additive manufacturing (AM) feedstock powders and printed parts. Determining chemical composition for any manufactured material is critical to understanding and predicting a part’s performance. Current methods of chemical characterization are difficult and time-consuming, requiring m ...

    SBIR Phase II 2022 Department of CommerceNational Institute of Standards and Technology
  6. High Throughput Experimental Discovery and Optimization for 3D Nanofabrication of Optical & Photonic Materials and Devices.

    SBC: IRRADIANT TECHNOLOGIES INC.            Topic: 2

    The fields of optics and photonics have long sought methods by which to do 3D nanofabrication; however, all methods to date have been lacking in material choices, speed, and possible geometries. Implosion Fabrication (ImpFab) is newly developed method for the 3D nanofabrication that is uniquely suited to address these needs and can therefore act as a platform for the future manufacturing of optica ...

    SBIR Phase II 2022 Department of CommerceNational Institute of Standards and Technology
  7. Contact-free optical metrology for energy-efficient manufacturing of mechanical metamaterials (Phase II)

    SBC: MULTISCALE SYSTEMS, INC.            Topic: 2

    Mechanical metamaterials are a class of advanced materials that use repeated three-dimensional geometric patterns to endow common materials with new, enhanced, and superior material properties. The “meta” in “metamaterials” refers to the geometric pattern, while the “material” can be a metal, polymer, ceramic, etc. Our expertise focuses on the design and production of mechanical metama ...

    SBIR Phase II 2022 Department of CommerceNational Institute of Standards and Technology
  8. Automated aqueous two-phase separation of single walled carbon nanotube species for enrichment process optimization and scale up

    SBC: ZYMOSENSE INC.            Topic: 2

    Single-walled carbon nanotubes (SWCNT) are known to have a variety of unique functional properties with utility in applications including optical sensing, electronics, pharmaceuticals, and water filtration. However, when manufactured, SWCNT occur as a heterogenous, polydisperse material that exhibits a range of properties that diminish performance. Purification of SWCNT by aqueous two-phase (ATP) ...

    SBIR Phase II 2022 Department of CommerceNational Institute of Standards and Technology
  9. Peracetic Acid Based Disinfectants for PPEs

    SBC: VURONYX TECHNOLOGIES LLC            Topic: 2

    In this Phase 1 SBIR proposal, Vuronyx Technologies proposes to develop acetylperoxyborate (APB) powders for disinfection of Personal Protective Equipments (PPEs) so that they can be reused. APB powders are stable, active-oxygen containing compounds that release peracetic acid upon dissolution in water. As explained in this proposal, the use of a APB powder disinfectant has the following advantage ...

    SBIR Phase I 2022 Department of CommerceNational Institute of Standards and Technology
  10. Multispectral Fluorescence Sensing of Airborne Proxy Infectious Particles in Actual Indoor Environments

    SBC: RATIOCINATIVE ENGINEERING SERVICES LLC            Topic: 2

    Filtering airborne infectious particles from indoor air is a critical element in controlling the spread of disease during COVID and future pandemics that are transmitted through the air. The aim of this proposed research from Ratiocinative Engineering Services, LLC is to develop a testbed that will lead to more accessible and robust quality control testing of air filtration and ventilation systems ...

    SBIR Phase I 2022 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government