You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 204481 - 204490 of 207712 results
  1. INTERNAL INSPECTION OF LONG TUBES

    SBC: Flow Research Inc            Topic: N/A

    N/A

    SBIR Phase I 1985 Department of DefenseAir Force
  2. RESEARCH TO INVESTIGATE THE POTENTIALS OF ABRASION JET IN TRANSPORT SYSTEMS CONSTRUCTION

    SBC: Fluidyne Corp            Topic: N/A

    HIGH-PRESSURE WATERJET IS ONE OF SEVERAL NEW METHODS FOR CUTTING MATERIALS DEVELOPED DURING THE LAST DECADE. CURRENTLY IT IS USED, AT STATIC WATER PRESSURE UP TO 60,000 PSI, TO CUT A WIDE VARIETY OF SOFT AND MEDIUM-HARD MATERIALS IN FACTORIES; IT HAS BEEN EVALUATED FOR GEOTECHNICAL APPLICATIONS WITH VERY LIMITED SUCCESS. THIS RESEARCH CONCERNS THE USE OF ABRASIVE-ENTRAINED WATERJET FOR CUTTING AND ...

    SBIR Phase II 1985 Department of Transportation
  3. SYNTHESIS OF NEW THERMOOXIDATIVELY STABLE POLYMER SYSTEMS

    SBC: FLUOROCHEM, INC.            Topic: N/A

    N/A

    SBIR Phase I 1985 Department of DefenseAir Force
  4. MICROWAVE TECHNIQUES

    SBC: Fossil Energy Res Corp            Topic: N/A

    THE PROJECT WILL EXAMINE THE TECHNICAL FEASIBILITY OF ENH ENHANCING THE THERMAL DESTRUCTION OF HAZARDOUS WASTE SLUDGE S, TARS, AND WATERY WASTES BY IMPROVING THE DISPERSION AND BURNOUT OF THESE MATERIALS IN INCINERATORS AND OTHER COMBUSTBUSTION EQUIPMENT. THE PRIMARY FOCUS WILL BE ON THE EVALUALUATION OF PROPRIETARY MICROWAVE TECHNIQUES, SINGLY OR POT POTENTIALLY IN COMBINATION WITH PROPRIETARY AD ...

    SBIR Phase I 1985 Environmental Protection Agency
  5. EXPLOITATION OF TACTICAL WARFARE TECHNOLOGY FOR STRATEGIC WARFARE

    SBC: Foster Engineering Co            Topic: N/A

    N/A

    SBIR Phase I 1985 Department of DefenseAir Force
  6. VENTILATED BAND SEALS FOR NON-MAGNETIC DIESELS

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    NON-MAGNETIC UNLINED ALUMINUM ENGINE BLOCKS ARE CURRENTLY FEASIBLE IN GASOLINE ENGINES, BUT NOT FOR DIESELS, WHERE PRESSURE LOADINGS AT THE FOR DIESELS, WHERE PRESSURE LOADINGS AT THE NOVEL VENTILATED BAND SEAL APPROACH WILL SOLVE THAT PROBLEM,AND WILL ALSO REDUCE FUEL CONSUMPTION IN ANY PISTON DRIVEN DEVICE. FEATURES INCLUDE: POSITIVE CONTACT FOR LOW LEAKAGE AND DIRT EXCLUSION, A VENTILATED FACE ...

    SBIR Phase II 1985 Department of DefenseNavy
  7. ENGINE POWERED MAN PORTABLE PERSONAL COOLING SYSTEM

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    A MAN PORTABLE PCS (PERSONAL COOLING SYSTEM) WILL BE DEVELOPED FOR TROOPS REQUIRING COOLING WHILE WEARING CHEMICAL WARFARE PROTECTIVE CLOTHING. THE CONCEPT DEVELOPED ON THIS PROJECT WILL USE A VAPOR COMPRESSION FREON CYCLE. THE POWER SOURCE FOR THE ROTARY COMPRESSOR WILL BE AN IC (INTERNAL COMBUSTION) GLOW PLUG IGNITION ENGINE. THE HEAT TRANSFER MEDIUM TO THE BODY WILL BE A WATER/GLYCOL SOLUTION. ...

    SBIR Phase II 1985 Department of DefenseArmy
  8. LOW FLOW SEPARATOR FOR OILY BILGE WATER

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    PRESENT NAVAL POLLUTION ABATEMENT SYSTEMS BEING USED FOR THE SEPARATION OF OILY CONTAMINANTS FROM THE BILGE WATER PRIOR TO DISCHARGE HAVE BEEN SIZED FOR 10 GPM AND 50 GPM FLOW RATES. THESE SYSTEMS, AT THEIR DESIGN FLOW RATES, ARE SUITABLE FOR APPROXIMATELY 70 PERCENT OF THE NAVY'S FLEET. THE REMAINING 30 PERCENT OF THE FLEET TYPICALLY REQUIRES A BILGE PROCESSING SYSTEM SIZED FOR FLOWS IN THE 1 TO ...

    SBIR Phase II 1985 Department of DefenseNavy
  9. RADWASTE DISPOSAL DRUM CENTRIFUGE

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    PRESENT METHODS FOR PREPARING THE NUCLEAR POWER INDUSTRIES LOW LEVEL SPENT RESIN RADWASTE FOR BURIAL DISPOSAL HAVE CREATED A PROBLEM IN TERMS OF LARGE WASTE VOLUME AND INABILITY TO MEET FEDERAL REGULATIONS CONTROLLING WASTE CHARACTERISTICS. FOSTER-MILLER, INC. HAS CONCEIVED A NOVEL CENTRIFUGAL TECHNIQUE FOR SIGNIFICANTLY REDUCING THE RADWASTE VOLUME AND ASSOCIATED DISPOSAL COST WHILE PRODUCING A W ...

    SBIR Phase II 1985 Department of Energy
  10. MONOCONE ROCK BIT WITH JETS AT THE TEETH: DESIGN AND TEST

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    GEOTHERMAL WELL DRILLING SUFFERS FROM LOW DRILLING RATES AND SHORT BIT LIFE. JET ENHANCEMENT OF ROCK FRACTURE (NOT JUST BOTTOM HOLE CLEANING OR EROSION) REMAINS TO BE DEMONSTRATED WITH A ROLLER BIT. EXPERIMENTS WITH SINGLE INDENTORS SHOW THAT THE PRIMARY ABSORPTION OF ENERGY OCCURS IN THE PULVERIZED ZONE BENEATH THE "TOOTH". ENERGY OF INDENTING IS REDUCED BY A FACTOR OF TWO OR MORE IF THE PULVERIZ ...

    SBIR Phase II 1985 Department of Energy
US Flag An Official Website of the United States Government