You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Directionally-Tailored Infrared Emission and/or Transmission

    SBC: Sensormetrix, INC            Topic: AF10BT30

    ABSTRACT: It is proposed to demonstrate a surface fabricated using thin film metamaterial designs that can exhibit rapidly varying angular as well as spectral emissivity profiles. The technology enables specification of desired angular pattern at design time, and can be fabricated in large area formats. BENEFIT: The proposed technology will allow directional control of thermal radiation in app ...

    STTR Phase II 2013 Department of DefenseAir Force
  2. Compact, Rugged, and Low-Cost Wavelength-Versatile Burst Laser

    SBC: Performance Lasers            Topic: A11aT009

    Current of the shelf commercial laser systems that are used for LIBS and other optical detection techniques are too costly, large, low performance and unreliable. The reason for it is because commercial laser systems are designed for continuous operation. Only one or few laser pulses are needed for detection, therefore, low cost burst lasers with the proper parameters are needed. Burst mode operat ...

    STTR Phase II 2013 Department of DefenseArmy
  3. MOCVD of High Performance Complex Oxide Films for Switchable Film Bulk Acoustic Resonators

    SBC: STRUCTURED MATERIALS INDUSTRIES, INC.            Topic: A11aT016

    In this STTR program, Structured Materials Industries, Inc. (SMI) and partners are developing high efficiency, switchable RF filters. The technical approach is based on thin films of paraelectric BaxSr1-xTiO3 and SrTiO3, which can show piezoelectric behavior under an applied DC bias. When integrated into resonator structures, these materials can act as both an RF filter and an RF switch. Combin ...

    STTR Phase II 2013 Department of DefenseArmy
  4. High Fidelity Obscurant Modeling for Sensor Simulations

    SBC: SIMULATION TECHNOLOGIES, INC            Topic: A11aT004

    A technique that enables new methods of obscurant modeling with faster rendering while maintaining or improving physical fidelity is proposed. The proposed technique not only exhibits the statistics of voxel based obscurants, but matches real-world data as well. The main objective from Phase II efforts will be a further refinement of the flow field and particle technique of generating physically c ...

    STTR Phase II 2013 Department of DefenseArmy
  5. A Priori Error-Controlled Simulations of Electromagnetic Phenomena for HPC

    SBC: HYPERCOMP INC            Topic: A11aT015

    Recent times have witnessed enormous advances in high fidelity modeling of electromagnetic (EM) phenomena in the time-domain. To make such simulations tractable, the computational region must be truncated in a manner allowing outgoing waves to leave with minimal reflection from the boundary. HyPerComp Inc., in collaboration with Prof. Thomas Hagstrom of the Southern Methodist University (Dallas, T ...

    STTR Phase II 2013 Department of DefenseArmy
  6. Low-Cost Chaos Radar

    SBC: TECHFLOW SCIENTIFIC            Topic: A11aT001

    To address the Army"s Phase-II requirements for a low-cost chaos-based radar demonstrator, TechFlow and its research partners- the University of New Mexico and Forza Silicon Corp., will implement and test a prototype E-band chaos radar system incorporating a coherent receiver. In Phase I, the TechFlow team performed a comprehensive study of the coherent chaos-based modulation scheme described by C ...

    STTR Phase II 2013 Department of DefenseArmy
  7. MEMS based thermopile infrared detector array for chemical and biological sensing

    SBC: New Jersey Microsystems, Inc.            Topic: A10aT004

    New Jersey Microsystems, Inc proposes to develop an economical thermopile array with sensitivity maximum in the long wave infrared region (LWIR). Current infrared detectors are too expensive to be widely deployed in large numbers. The proposed MEMS technology is simpler, more manufacturable, and therefore less expensive than existing bolometers and ferroelectric devices based on rare earth and ...

    STTR Phase II 2013 Department of DefenseArmy
  8. Automated Human and System Performance Assessment in Operational Environments

    SBC: ADVANCED ANTI-TERROR TECHNOLOGIES CORP            Topic: N11AT001

    Our Fused-Realities-Assessments-Modules(FRAM) enables innovative new levels and types of automated quantification strategies for combining human and system performance in real-time for fused performance monitoring and after-action-review purposes. FRAM accomplishes this by fusing output of normative models of behaviors (cognitive/procedural/team), human states (physiological/affective), system sta ...

    STTR Phase II 2013 Department of DefenseNavy
  9. Synergistic MIMO Radar and Data Adaptive Signal Processing Experimentation

    SBC: INTEGRATED ADAPTIVE APPLICATIONS, INC            Topic: N11AT002

    The proposed work seeks to clearly demonstrate the advantage of the multiple-input multiple-output (MIMO) radar architecture over a similar single-input multiple-output (SIMO) or phased array system; the benefit of applying data-adaptive signal processing techniques in favor of their data-independent counterparts; and the utility of transmitting advanced probing waveforms as opposed to conventiona ...

    STTR Phase II 2013 Department of DefenseNavy
  10. Planar Doppler Velocimetry for Aircraft Exhausts

    SBC: METROLASER, INCORPORATED            Topic: N11AT004

    A diagnostic is being developed for aircraft engine exhausts that measures three velocity components in a slice through the plume. The method measures the Doppler shift of laser light scattered from particles naturally present in the flow, such as soot or dust. Two key areas of uncertainty were investigated in the Phase I study: 1) scattered light intensity from soot particles of sizes and concent ...

    STTR Phase II 2013 Department of DefenseNavy
US Flag An Official Website of the United States Government