You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Small Team Command, Control, Communications and Situational Awareness (C3SA), SOCOM08-001

    SBC: CEEBUS TECHNOLOGIES, LLC            Topic: SOCOM08001

    SOF combat swimmers have a need for the continuous monitoring of each others relative position while diving and for the capability of being able to communicate with each other to help establish a common operational picture (COP).The C3SA system was previously developed under SBIR Topic SOCOM08-001 thru the receipt of both Phase I and Phase II SBIR awards.The C3SA established a stand-alone network ...

    STTR Phase II 2018 Department of DefenseSpecial Operations Command
  2. Integrated system for field, clinic and laboratory preparation of biological specimens for microscopy

    SBC: Microscopy Innovations, LLC            Topic: DHP16C004

    Biological tissues collection is problematic and risky even under ideal conditions; when collection occurs in remote locations, or by minimally- trained personnel, as may occur in response to an emerging disease threat, risks are magnified. This proposal addresses this issue by developing a Field Fixation Unit (FFU) for specimen collection that utilizes single-use capsules pre-loaded with fixative ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  3. CPS: Creative Problem Solver

    SBC: SMART INFORMATION FLOW TECHNOLOGIES LLC            Topic: N16AT002

    Military systems operate in complex, adversarial environments where their initial planned operations are often overcome by events, but soldiers use those systems in creative ways to achieve their mission objectives. For example, complex ground robotic systems that were initially deployed for surveillance and explosive ordinance disposal have instead been used as decoys, ammunition carriers, and ot ...

    STTR Phase II 2018 Department of DefenseDefense Advanced Research Projects Agency
  4. Integrated ultra-high performance electro-optic modulators

    SBC: SRICO INC            Topic: AF18AT003

    This proposed project combines advanced thin film materials engineering technology with state of the art photonic integrated circuit device concepts to develop next generation integrated electro-optic modulator devices. The proposed high speed thin film electro-optic modulator technology fills a critical need for compact, low voltage, and high analog bandwidth linear electro-optic modulators in si ...

    STTR Phase I 2018 Department of DefenseAir Force
  5. Volumetric Wavefront Sensing for the Characterization of Distributed-Volume Aberrations

    SBC: Guidestar Optical Systems, Inc.            Topic: AF18AT006

    Modern Directed Energy (DE) missions require target engagements at low elevation angles and long ranges.These engagement geometries require propagation through distributed-volume turbulence. To correct for distributed-volume turbulence effects, an estimation of the turbulence along the propagation path is required. Correcting for these image aberrations will improve the quality of the target image ...

    STTR Phase I 2018 Department of DefenseAir Force
  6. Complex Object Reflectance Characterization System (CORCS)

    SBC: NUTRONICS, INC.            Topic: AF18AT007

    Nutronics, Inc. and Montana State University propose to develop a method for characterization of the full Mueller matrix for reflective scattering from a test object. The Complex Object Reflectance Characterization System (CORCS) will initially be designed for laboratory use and characterization of test objects by active imaging to measure both the Mueller Matrix and the target depth associated wi ...

    STTR Phase I 2018 Department of DefenseAir Force
  7. Anisotropic Property Manipulation of Selective Laser Melted GRCop-84

    SBC: SPECIAL AEROSPACE SERVICES            Topic: AF18AT009

    In partnership with the Colorado School of Mines Alliance for the Development of Additive Processing Technologies and with support from the Johns Hopkins University Energetic Research Group, Special Aerospace Services will provide the Air Force with characterization of fully dense Selective Laser Melted GRCop-84 subjected to a variety of manipulations that affect key performance metrics for regene ...

    STTR Phase I 2018 Department of DefenseAir Force
  8. High Temperature Materials for Hypersonic Radomes and Antennas

    SBC: AMERICAN TECHNICAL COATINGS, INC.            Topic: AF18AT013

    The advancement of flight vehicles, including hypersonic vehicles, requires increased performance from RF shielding material capable of withstanding the dynamic and thermal loads of the vehicle while maintaining RF performance.Efforts conducted as a response to this program will develop and characterize material for use as radomes and conformal apertures of flight vehicles and other extreme enviro ...

    STTR Phase I 2018 Department of DefenseAir Force
  9. Electron emitting graphene based composite coating for spacecraft charging mitigation

    SBC: Faraday Technology, Inc.            Topic: AF18AT011

    Faraday and Utah State University propose to demonstrate the feasibility of utilizing electrophoretic deposition to develop graphene features with controlled functional properties in order to address the DoD need for a spacecraft charging mitigation. Implementation of such materials in DoD mission areas is anticipated to lower costs, improve sustainability, and increase readiness. The proposed Pha ...

    STTR Phase I 2019 Department of DefenseAir Force
  10. Wide-Area Laser Additive Manufacturing in Metals with Adaptive Beam Shaping (WALAM-ABS)

    SBC: MV INNOVATIVE TECHNOLOGIES, LLC            Topic: N17AT030

    Optonicus proposes development of the Wide-Area Laser Additive Manufacturing in Metals with Adaptive Beam Shaping (WALAM-ABS) laser additive manufacturing (LAM) system. The WALAM-ABS metal additive manufacturing system will solve long-standing drawbacks imposed by current single-point selective laser melting LAM technology through the use of wide-area processing based on proprietary multi-beam fib ...

    STTR Phase II 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government