You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. STRUCTURAL LATCH MECHANISM CONCEPTS WILL BE DEVELOPED TO BE USED ON FUTURE FIGHTER AIRCRAFT FOR INTERFACING THE CREW ESCAPE CAPSULE WITH THE AIRFRAME.

    SBC: SCIENCE & ENGINEERING ASSOC., INC.            Topic: N/A

    STRUCTURAL LATCH MECHANISM CONCEPTS WILL BE DEVELOPED TO BE USED ON FUTURE FIGHTER AIRCRAFT FOR INTERFACING THE CREW ESCAPE CAPSULE WITH THE AIRFRAME. THE F-111 ESCAPE CAPSULE DESIGN WILL AID IN THE GENERATION AND VALIDATION OF PRELIMINARY DESIGN REQUIREMENTS. THREE PHILOSOPHIES WILL BE CONSIDERED IN DEVELOPING THE DESIGN CONCEPTS. ONE WILL MAXIMIZE THE LOAD DISTRIBUTION BETWEEN THE TWO STRUCTURES ...

    SBIR Phase I 1986 Department of DefenseAir Force
  2. ROBOTICS AND COMPUTER INTEGRATED PRINTING (CIP)

    SBC: Sees Inc            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseNavy
  3. THIS PROJECT PROPOSES TO CONDUCT A LIMITED NUMBER OF MUCK FLOW EXPERIMENTS USING A CONTROLLED MUCK MATERIAL AND A SPECIALLY FABRICATED CHUTE SYSTEM.

    SBC: Shannon & Wilson Inc            Topic: N/A

    THIS PROJECT PROPOSES TO CONDUCT A LIMITED NUMBER OF MUCK FLOW EXPERIMENTS USING A CONTROLLED MUCK MATERIAL AND A SPECIALLY FABRICATED CHUTE SYSTEM. THE PROJECT WILL ATTEMPT TO DETERMINE HOW SOME OF THE FLOW FACTORS INTERACT WITH ONE ANOTHER TO INFLUENCE MUCK FLOW RATE. MEASUREMENTS OF MASS FLOW RATE IN TERMS OF THE RATE OF MUCK ACCUMULATION AT THE END OF THE CHUTE WILL BE MADE FOR 2 CHUTE ANGLES ...

    SBIR Phase I 1986 Department of DefenseAir Force
  4. MINIATURE, RADIATION HARD ACCELEROMETER FOR KINETIC ENERGY VEHICLE

    SBC: Silicon Designs, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseMissile Defense Agency
  5. EXPAND NEW BONDED SEAM TECHNOLOGY IN THE ASSEMBLY OF GARMENTS- RESEARCH DESIGN STUDY

    SBC: Ssunnol Inc.            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseNavy
  6. IN REMOVING PAINT FROM FIBER COMPOSITE COMPONENTS, TRADITIONAL PROCEDURES SUCH AS PLASTIC BEAD BLASTING HAVE BEEN SHWON TO LEAD TO REMOVAL OF THE GEL COAT, EXTENSIVE FIBER BREAKAGE AND MATRIX DEBONDING WHICH RESULTS IN LOSSES OF UP TO 30% IN THE

    SBC: Taylor S R & Assocs            Topic: N/A

    IN REMOVING PAINT FROM FIBER COMPOSITE COMPONENTS, TRADITIONAL PROCEDURES SUCH AS PLASTIC BEAD BLASTING HAVE BEEN SHWON TO LEAD TO REMOVAL OF THE GEL COAT, EXTENSIVE FIBER BREAKAGE AND MATRIX DEBONDING WHICH RESULTS IN LOSSES OF UP TO 30% IN THE MATRIX-DOMINATED MECHANICAL PROPERTIES AND MINOR LOSSES IN THE FIBER-DOMINATED PROPERTIES. VERY RECENT PRELIMINARY RESULTS ACHIEVED BY US INDICATE THAT TH ...

    SBIR Phase I 1986 Department of DefenseAir Force
  7. AIRCRAFT COMPONENTS WHICH UTILIZE THERMOPLASTIC COMPOSITES OFFER SIGNIFICANT ADVANTAGES OVER METALLIC STRUCTURES DUE TO THE COMBINATION OF REDUCED WEIGHT AND INCREASED STRENGTH INHERENT IN COMPOSITE STRUCTURES.

    SBC: Taylor S R & Assocs            Topic: N/A

    AIRCRAFT COMPONENTS WHICH UTILIZE THERMOPLASTIC COMPOSITES OFFER SIGNIFICANT ADVANTAGES OVER METALLIC STRUCTURES DUE TO THE COMBINATION OF REDUCED WEIGHT AND INCREASED STRENGTH INHERENT IN COMPOSITE STRUCTURES. FABRICATION OF THERMOPLASTIC COMPOSITES IS PLAGUED BY POROSITY OR VOIDS IN THE CONSOLIDATED PART, POOR, INEFFICIENT FIBER WETTING AND DIFFICULT CONTROL OF RESIN FLOW AND CRYSTALLINITY. ULTR ...

    SBIR Phase I 1986 Department of DefenseAir Force
  8. A DUAL LEVEL TEMPERATURE WARNING SWITCH IS TO BE DESIGNED, PROTOTYPED, AND VERIFIED TO MEET TECHNICAL SPECIFICATIONS.

    SBC: TECHNOLOGY FOR ENERGY CORP.            Topic: N/A

    A DUAL LEVEL TEMPERATURE WARNING SWITCH IS TO BE DESIGNED, PROTOTYPED, AND VERIFIED TO MEET TECHNICAL SPECIFICATIONS. THE PROTOTYPE DUAL LEVEL TEMPERATURE WARNING SWITCH WILL BE DESIGNED IN MINIATURE, MAKING IT INTERCHANGEABLE WITH THE CURRENT SINGLE LEVEL TEMPERATURE WARNING SWITCH SPECIFIED IN MIL-S-12285/2C, 22 JULY 1975. THE PHASE I RESULTS WILL ESTABLISH THE VIABILITY OF THE DESIGN. THE MANUF ...

    SBIR Phase I 1986 Department of DefenseArmy
  9. AN ON-LINE X-RAY DIFFRACTION METHOD FOR DETERMINING GRAIN SIZE IN POLYCRYSTALLINE MATERIALS

    SBC: TECHNOLOGY FOR ENERGY CORP.            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseArmy
  10. DEVELOPMENT

    SBC: INNOVATIVE TECHNOLOGY INC            Topic: N/A

    MILITARY PERSONNEL ARE AT RISK TO VARIOUS FORMS OF GASTROENTERITIS AS THEY ARE TRANSFERRED TO PARTS OF THE WORLD WHERE CONDITIONS FAVOR CONTAMINATION OF FOOD OR WATER WITH THE CAUSATIVE AGENTS. MANY OF THESE FORMS OF GASTROENTERITIS ARE SELF LIMITING, BUT VIBRIO CHOLERAE IS THE CAUSATIVE AGENT OF A SEVERE FORM OF GASTROENTERITIS WHICH CAN BE FATAL IF UNTREATED. IT IS THE GOAL OF THIS PROJECT TO DE ...

    SBIR Phase I 1986 Department of DefenseArmy
US Flag An Official Website of the United States Government