You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Efficiency Propeller for Small Unmanned X Systems using Advanced Composite Materials

    SBC: CATTO PROPELLERS            Topic: N20AT006

    In the proposed STTR study, Catto Propellers, Inc. (Catto) and the University of North Dakota (UND) will create an efficient new propeller design utilizing advanced composite materials for use on small unmanned x systems.  During Phase I, a comprehensive study will be conducted to develop a new propeller design in order to increase propeller efficiency, reduce aerodynamic noise and utilize innova ...

    STTR Phase I 2020 Department of DefenseNavy
  2. High Fidelity Rotorcraft Towing Modeling and Simulation with Towed Magnetic Anomaly Detection System

    SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC.            Topic: N15AT009

    Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...

    STTR Phase II 2016 Department of DefenseNavy
  3. High Hesitivity Magnetic Materials for Magnetic Toroid and Flat Dipole Antennas

    SBC: WINCHESTER TECHNOLOGIES LLC            Topic: N16AT001

    Novel approaches are needed to improve the performance and reduce the size, number and signature of antennas with significantly enhanced efficiency in HF-UHF. It has been shown recently hesitivity, which is able to characterize the performance of the material and categorize the radiation efficiency of magnetodielectric wire antennas; the higher the hesitivity, the higher the attainable antenna eff ...

    STTR Phase I 2016 Department of DefenseNavy
  4. Hybrid Unmanned Air / Underwater Vehicle for Explosive Ordnance Disposal (EOD) and Mine Countermeasures (MCM)

    SBC: GREENSIGHT INC.            Topic: N16AT025

    A particularly challenging task for the US Navy today is that of Explosive Ordnance Disposal (EOD) of underwater mines; the Mine Countermeasures (MCM) mission. The semi-submersible Remote Multi-Mission Vehicle (RMMV) has emerged as an unmanned solution to handle MCM missions. While the RMMV is groundbreaking, the basis of the technology is a relatively slow-moving watercraft.GreenSight Agronomics, ...

    STTR Phase I 2016 Department of DefenseNavy
  5. In-Air E-field Sensor for Airborne Applications

    SBC: White River Technologies Inc            Topic: N15AT004

    The U.S. Navy is seeking new technologies and platforms to advance airborne anti-submarine warfare (ASW) and related maritime surveillance. Current magnetic anomaly detection (MAD) sensors, such as the latest versions of atomic magnetometers, are capable of very low noise operation. However, the performance of these sensors can be limited by the geomagnetic noise environment more so than by eithe ...

    STTR Phase II 2016 Department of DefenseNavy
  6. Injection Locked "Cooker" Magnetron

    SBC: PHYSICAL SCIENCES INC.            Topic: N20AT015

    The Navy desires a compact and highly efficient S-band magnetron source with stabilized output capable of modulation over a narrow bandwidth. In this Phase I STTR proposal, Physical Sciences Inc (PSI) outlines the development of an injection locked “cooker” magnetron which can be used for frequency shift keying (FSK) or phase shift keying (PSK) in a portable high power transmission device. In ...

    STTR Phase I 2020 Department of DefenseNavy
  7. In Situ Inspection of Additive Manufactured Metallic Parts Using Laser Ultrasonics

    SBC: INTELLIGENT OPTICAL SYSTEMS, INC.            Topic: N15AT008

    Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

    STTR Phase II 2016 Department of DefenseNavy
  8. Intelligent Additive Manufacturing- Metals

    SBC: TRITON SYSTEMS, INC.            Topic: N20AT018

    Although metal AM technologies have continued to progress, there are still many different challenging factors to a build that impact part quality and the amount of time it takes to successfully process a first-run component without defects. Triton Systems proposes to develop a machine learning algorithm that adjusts print parameters during the build in reaction to in-situ sensor data in order to ...

    STTR Phase I 2020 Department of DefenseNavy
  9. Interlaminar Reinforcement of Composites via Tailored CNT Nanomorphologies

    SBC: METIS DESIGN CORPORATION            Topic: N19AT003

    The Phase I effort of this STTR aimed to reinforce ply-drop laminates. When laminates taper from a thicker to thinner cross section, the termination of plies locally create resin pockets that can reduce the life of a part due to the lower strength of the resin compared to the fibers, local stress concentrations, and the propensity for voids in these resin rich areas. Thus, Metis Design Corporation ...

    STTR Phase II 2020 Department of DefenseNavy
  10. Joint User-Centered Planning Artificial Intelligence Tools Effective Mission Reasoning (JUPITER)

    SBC: CHARLES RIVER ANALYTICS, INC.            Topic: N19BT029

    Effective mission planning is critical for military strategy and execution. This process is complex as human operators must consider many variables (e.g., resource limitations, threats, risks) when formulating a plan to accomplish mission goals. Although powerful tools, such as the Navy’s Joint Mission Planning System (JMPS), provide advanced functionality, mission planning remains a hybrid acti ...

    STTR Phase II 2020 Department of DefenseNavy
US Flag An Official Website of the United States Government