Award Data

Fibertek proposes a configurable, multi-beam, 1.5 um Doppler Lidar sensor, enabled by high-speed non-mechanical beam steering (NMBS). NMBS uses state-of-the-art, high-speed liquid-crystal based components, to provide wide-angle (up to +/- 45 degree), large-aperture, optical beam steering, at speeds of up to 10 kHz. Furthermore, this is integrated into a very compact optical transmit/receive termin ...

Laser transmitters operating at a pulse repetition rate of 20 Hz to 50 Hz and with pulse energy from 30 - 50 mJ have been considered to be an enabling technology for CO2 measurement and optical communications. PolarOnyx proposes a novel approach targeting to make reliable high energy ultra large core fiber amplifier at 1.57 micron and employing our proprietary technologies in specialty fibers, spe ...

A variety of nondestructive inspection (NDI) techniques are already available for detection of small defects within structures. These techniques, although useful, provide little insight in terms of the remaining useful life of components or structures. Furthermore, NDI techniques rely on statistical analyses of historical usage records and can often result in situations where maintenance schedul ...

Pressurized systems and pressure vessels used in NASA ground-based and flight-based applications including fuel tanks, composite overwrapped pressure vessels (COPVs), and composite tankage commonly suffer from several types of degradation including fatigue, cracking, lack of bonding, and leakage. Veraphotonics proposes to develop a pressure vessel leak and damage detection system. In a large vesse ...

As the carry and protective gear of the modern war fighter increases, the burden on the human body will necessarily increase. In our present TALOS MkIII project, we are developing lower body augmentation to preserve speed and agility while bearing this weight. Yet we cannot ignore the impact of this weight on the upper body: in this project we propose to develop an upper body exoskeleton with p ...

Advanced turbomachinery components play a critical role in launch vehicle and spacecraft liquid rocket propulsion systems. To achieve desired efficiencies, extremely tight tolerances are often imposed between inducer blades and shrouds or other system components which sets up strong interactions that influence both the aerodynamics and the structural performance of blades and vanes. These transien ...

Chemical contamination of spacecraft components as well as thermal and force loading from firing liquid propellant thrusters are critical concerns for in-space propulsion applications. Gas molecular contamination and liquid droplet deposition due to incomplete combustion threaten to damage surface materials, sensitive instruments and optical sensors, and poses major risks for mission success. Liqu ...

NASA's goals to explore deep space through manned missions requires development of self-sustaining life support systems. A diverse team from Freight Farms, Inc. have partnered with Clemson University to merge knowledge of sustainable farming with engineering expertise to create off-grid infrastructure for self-sustaining plant life that will assist NASA with their goals. Freight Farms' current pro ...

Fractionated spacecraft architectures to distribute mission performance from a single, monolithic satellite across large number of smaller spacecraft, for missions like close proximity inspection, sparse aperture arrays, robotic assembly, servicing, refueling, etc., can enable higher mission capability, reconfigurability and robustness. This distributed satellite architecture, with large numbers o ...

GTL?s SNS technology aids in the operation of new or existing structural health monitoring (SHM) systems by integrating data and power pathways into the structure. The use of this technology within a composite structure would allow engineers to place sensors from an SHM system directly where they are needed on a structure with instant power. GTL?s SNS technology offers the potential for developers ...