You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Filament Wound Resin Transfer Molded Composite Pressure Vessel

    SBC: SAN DIEGO COMPOSITES, INC.            Topic: MDA05024

    San Diego Composites (SDC) is developing a toroidal composite overwrap pressure vessel (COPV) for use on next generation propulsion systems. A development effort sought to optimize the electron beam welding process parameters to reduce weld integrity sensitivity to poor fit up conditions when butt-welding the thin titanium liners integral to these composite overwrapped tanks. Results from this dev ...

    SBIR Phase II 2017 Department of DefenseMissile Defense Agency
  2. Anchoring Post-Intercept Debris Prediction Tools

    SBC: CORVID TECHNOLOGIES, LLC            Topic: MDA12029

    Initial research into potential in-situ KA sensor technologies has uncovered viable sensor technologies and demonstrated the existence of exploitable features that could discriminate between objects of similar shape and size, but very different materials and internal structure. A few different KA sensor types have been hypothesized and it is likely that more than one sensor type is necessary to co ...

    SBIR Phase II 2017 Department of DefenseMissile Defense Agency
  3. Low Cost, High Performance IFOG Sensors using Hybrid Integration

    SBC: GC Holdings, Inc.            Topic: MDA04181

    The goal of the Phase II program is to build on the Phase I results to develop a 3-axis low-cost optical engine for the interferometric fiber optical gyroscope (IFOG) that is a key cost component of an inertial rate sensor. Hybrid integration of glass and lithium niobate waveguide chips will be used to demonstrate a method of combining all three axes of the IFOG system onto a single optical compon ...

    SBIR Phase II 2006 Department of DefenseMissile Defense Agency
  4. Lightweight, Multi-functional Electronic Enclosures for KEI

    SBC: SAN DIEGO COMPOSITES, INC.            Topic: MDA04111

    The Kinetic Energy Interceptor (KEI) missile intercepts incoming ballistic missiles during the launch portion of their flight. Achieving the peak velocity with current rocket motor technology has presented the KEI missile lead contractor, Raytheon, with an aggressive low weight challenge for the interceptor payload. KEI engineers have proposed lightweight materials for most of the payload compon ...

    SBIR Phase II 2006 Department of DefenseMissile Defense Agency
  5. Rugged MEMS-Enabled Ku-Band Phased Arrays

    SBC: Xcom Wireless, Inc            Topic: MDA04063

    XCom Wireless is a developer of RF MEMS for tunable filters and phased array antennas, high-performance circuitry identified as critical technologies for the next generations of defense and commercial RF electronics. XCom MEMS-enabled microwave circuitry provides an alternative to solid-state technologies in communications and radar systems, with these miniaturized passive components replacing po ...

    SBIR Phase II 2006 Department of DefenseMissile Defense Agency
  6. Ballistic Missile Innovative Electro-Optic Products

    SBC: REYNARD CORPORATION            Topic: MDA04112

    Prototype mirrors will be fabricated on a prioritized list of the "Beryllium Replacement" materials and tested for optical performance at Reynard Corporation and x-ray hardness at DTRA's Double Eagle facility. The design kmeets or exceeds the optical requirements along with increasing the x-ray hardness by 2x more.

    SBIR Phase II 2006 Department of DefenseMissile Defense Agency
  7. Lightweight Kinematic Optical Mount for Vibration and Shock Environments

    SBC: CSA Engineering, Inc.            Topic: MDA04110

    The objective of this program is to develop a lightweight kinematic optical mount with integrated passive vibration-and-shock mitigation technologies and robust "Set and Forget" alignment adjustment design features. The intended use of this advanced optical mount is within existing DoD optical systems but can also be tailored to enhance alignment stability of new Commercial and DoD systems operat ...

    SBIR Phase II 2006 Department of DefenseMissile Defense Agency
  8. Improving Radiation Tolerance of COTS-Based Systems With Fast Nuclear Event Detection and Circumvention System

    SBC: NU-TREK, INC.            Topic: MDA04036

    Nu-Trek will develop a prototype monolithic nuclear event detector, “Nu-Det”. The key innovation is the Built-In-Test (BIT) capability. The BIT enables: (1) Verification of functionality of the transistors in the transistor bank; and (2) Verification of radiation “trip” threashold. Since the base-collector junction is all that is required for radiation detection, functionality is a 100% te ...

    SBIR Phase II 2006 Department of DefenseMissile Defense Agency
  9. Unstructured Fixed Grid with Moving Body, Navier-Stokes Computational Fluid Dynamic (CFD) Solver for Simulating Gas Flows

    SBC: CORVID TECHNOLOGIES, LLC            Topic: MDA04136

    In this PhaseII SBIR effort, Corvid Technologies completes the development of an innovative approach for solving Unstructured Fixed Grid Navier-Stokes CFD flow simulations. The proposed approach developed at Corvid is referred to as the Virtual Geometry Insertion (VGI) technique. This approach allows for the virtual insertion of arbitrary geometric components into a standard CFD analysis. This g ...

    SBIR Phase II 2006 Department of DefenseMissile Defense Agency
  10. Innovative Jitter Control Algorithms

    SBC: STOCHASTECH CORPORATION            Topic: MDA04104

    In the proposed effort, we will develop real-time software for adaptive control of optical jitter. Our efforts will focus on the integration of multiple actuators and multiple sensors, using time domain realizations, robust controllers, and adaptation schemes to reject platform jitter in optical trains. These controllers will be coupled with our adaptive optics and tracking schemes to provide opti ...

    SBIR Phase II 2006 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government