Award Data

An existing low-cost FPGA-based processing platform will be demonstrated with fiber-coupling to single-photon detectors, to perform photon-arrival time stamping with

A stable, well characterized InGaAs materials growth and photodetector fabrication process will be used to fabricate matched photodiodes optimized for balanced homodyne detection. The 1-mm-diameter p-i-n photodetectors will be manufactured back-illuminated with a 5-micron absorber, allowing residual light to reflect off the front-side metal to make a double pass through the active layer. Ultra-hig ...

Voxtel has demonstrated efficient high-speed photon counting with thresholded linear-mode avalanche photodiode (APD) receivers using multi-gain-stage InGaAs/InAIAs APDs. In contrast to Geiger APDs, thresholded photon-counting linear APD receivers are thought not to suffer afterpulsing, and can support maximum count rates (MCR) up to 2 or 3 orders of magnitude faster than Geiger APDs. However, the ...

We will develop two programs to process data describing a model geometry and convert it to input acceptable to the Monte Carlo transport codes MCNP and MCNPX. One program will read CAD files in the ACIS solid body SAT format. Solid bodies, surfaces, and cells described in the SAT file will be converted to equivalent MCNP objects where available. Where there is no MCNP equivalent, such as for splin ...

Single chirality of single-walled carbon nanotubes (SWCNTs) is critical for their superb mechanical, thermal, optical and electronic properties. All known methods for producing nanotubes give mixtures of tubes with different chiralities. Physical separation of SWCNT by chirality is thus an enabling step for many potential applications and fundamental studies. The existing anion exchange resins are ...

The applicant will develop a wave energy harvesting system for NOAA buoys. It will ve entirely self-contained (no protruding elements), modular, scalable, and easily deployed. The system employs a unique, inertial mechanism that responds to acceleration forces created by waves. This mechanism will be combined with (1) a proprietary generator that is sensitive to very low levels of torque and ha ...

This Phase II SBIR will execute the research to commercialization process developed in Phase I, when WorldWinds, Inc. developed and implemented a procedure to showcase graphical NOAA products for on-air consumption by the general public. Through collaboration with Baron Services, Inc., of Huntsville, AL, the Phase I project developed a prototypical composite Blended Total Precipitable Water produ ...

Sepax Technologies, Inc. has identified a new type of anoin-exchange resin which separates single-wall carbon nanotubes (SWCNTs) with >80% recovery yield and resolves in a single pass the chiral tubes of (6,5) well from commercial SWCNT starting materials by Chromatography. Improvement and scale up of the targeted resin production will facilitate the separation of chiral nanotubes for the academic ...

X-ray fluorescence spectroscopy is a widely used and extremely sensitive analytical technique for qualitative as well as quantitative chemical analysis. Superconducting Transition Edge Sensor (TES) microcalorimeter detectors have now been developed that achieve an energy resolution of 2 eV (full width at half maximum) for 1.5 keV X-rays, which is sufficient to enable the measurement of the small s ...

X-ray fluorescence spectroscopy is a widely used and extremely sensitive analytical technique for qualitative and quantitative chemical analysis. Superconducting Transition Edge Sensor (TES) microcalorimeter detectors have now been developed that achieve an energy resolution of 2 eV for 1.5 keV X-rays, which is sufficient to enable the measurement of the small shift of the X-ray line position that ...