List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. FEASIBILITY AND DESIGN OF A MICROWAVE WARHEAD

    SBC: Irt Corp            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of DefenseAir Force
  2. THE PURPOSE OF THIS PROJECT IS TO TEST THE FEASIBILITY OF SPEAKER VERIFICATION TECHNOLOGY AS A VIABLE METHOD TO PROVIDE RAPID AND ACCURATE PERSONNEL IDENTIFICATION.

    SBC: Johnson Engineering            Topic: N/A

    THE PURPOSE OF THIS PROJECT IS TO TEST THE FEASIBILITY OF SPEAKER VERIFICATION TECHNOLOGY AS A VIABLE METHOD TO PROVIDE RAPID AND ACCURATE PERSONNEL IDENTIFICATION. IN ADDITION, THE ADAPTATION OF A NELSON AND JOHNSON ENGINEERING DESIGNED PERSONNEL LOCATOR WILL BE STUDIED FOR POSSIBLE USE IN PERSONNEL LOCATION IN A DEEP BASE APPLICATION. THE IDENTIFICATION AND LOCATION SYSTEM WILL BE COMPUTER CONTR ...

    SBIR Phase I 1984 Department of DefenseAir Force
  3. TREATMENT/PURIFICATION SYSTEM

    SBC: Klm Technologies Inc            Topic: N/A

    THE AIR FORCE DEEP BASE FACILITIES MUST OPERATE AS AN ISOLATED ENVIRONMENT FOR UPWARD OF ONE YEAR. KLM TECHNOLOGIES IS PROPOSING TO DEVELOP A WASTE WATER TREATMENT AND PURFIFICATION SYSTEM TO HANDLE LIQUID DOMESTIC, INDUSTRIAL AND MEDICAL WASTE STREAMS. THESE WASTES POSE A CHALLENGE TO PROVIDING A HIGHLY RELIABLE, LOW MAINTENANCE, LOWCOST AND LOW ENERGY SYSTEM WITH MINIMAL RESIDUE AND DISCHARGES. ...

    SBIR Phase I 1984 Department of DefenseAir Force
  4. APPLICATIONS

    SBC: Labudde Engineering Corp            Topic: N/A

    THE PHASE I PROPOSAL ISJFOR THE EXPLORATORY RESEARCH INTO MATERIALS FOR ERASABLE OPTICAL DISKS. THE MAJOR EFFORT IN PHASE I WILL BE: (1) THE DEVELOPMENT OF A BASIC MEDIA TEST STAND FOR TESTING SMALL MEDIA SAMPLES, (2) THE EVALUATION OF CANDIDATE MEDIA SAMPLES FROM VARIOUS RESEARCHERS IN THE FIELD AND (3) A FINAL REPORT WITH A COMPARISON OF TEST RESULTS AND RECOMMENDATIONS AS TO THE MOST VIABLE MAT ...

    SBIR Phase I 1984 Department of DefenseAir Force
  5. RESEARCH ON THE CORRELATION BETWEEN ELECTROSTATIC FIELD INTEGRITY AND THE PREFORMANCE OF ELECTRON GUNS

    SBC: Lehrer-pearson Inc.            Topic: N/A

    IT IS NOW FEASIBLE TO BUILD A THERMIONIC EMITTER (ELECTRON GUN) WITH 25 TO 50 TIMES GREATER PRECISION OF ELECTRODE FORM AND POSITION THAN HAS BEEN CNVENTIONALLY ACHIEVEABLE. LEHRER- PEARSON, INC., (LP) WILL DO THIS USING A DESIGN CONCEPT (PATENT PENDING) THAT ALLOWS, FOR THE FIRST TIME, HIGH PRECISION CONTROL OF ELECTRODE FORM AND POSITION. WHAT THIS MIGHT DD TO IMPROVE BEAM QUALITY IS PRESENTLY U ...

    SBIR Phase II 1984 Department of DefenseAir Force
  6. USE OF A SPECIAL, HIGH STIFFNESS PRECISION TURNING MACHINE WITH A POLYCRYSTAL CUBIC BORON NITRIDE TOOL BIT PROMISES TO ALLOW CATHODE EMITTER SURFACE FINISHING FREE, OR AT LEAST FREER, OF THE SMEARING, TEARING, AND PLASTIC FLOW OF CATHODE MATERIAL

    SBC: Lehrer-pearson Inc.            Topic: N/A

    USE OF A SPECIAL, HIGH STIFFNESS PRECISION TURNING MACHINE WITH A POLYCRYSTAL CUBIC BORON NITRIDE TOOL BIT PROMISES TO ALLOW CATHODE EMITTER SURFACE FINISHING FREE, OR AT LEAST FREER, OF THE SMEARING, TEARING, AND PLASTIC FLOW OF CATHODE MATERIAL (SINTERED TUNGSTEN) COMMON TO CONVENTIONAL PROCESS. MICROSCOPIC COMPARISON OF A CONVENTIONAL DISPENSER CATHODE SURFACE FINISH USING A HARDINGE LATHE AND ...

    SBIR Phase I 1984 Department of DefenseAir Force
  7. APPLICATION OF TWO-PHASE FLOW AND HEAT TRANSFER CORRELATIONS TO ZERO GRAVITY CONDITIONS

    SBC: Levy S Inc            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of DefenseAir Force
  8. HIGH-ACCURACY INFLATABLE REFLECTORS--PHASE I (LIP-182)

    SBC: L'GARDE INC.            Topic: N/A

    THE ABILITY TO BUILD INFLATABLE PARABOLOID REFLECTORS WITH A SURFACE RMS ACCURACY OF 0.76MM HAS BEEN DEMONSTRATED. THE MAJOR SOURCE OF ERROR IS THE STIFF SEAMS NEEDED WHEN LARGE REFLECTORS ARE MADE. THIS PROGRAM WILL EXAMINE METHODS OF IMPROVING THE SEAM CONFIGURATION TO REDUCE SURFACE ERROR TO 0.1MM OR LESS. LABORATORY CONSTRUCTION AND TESTING OF CANDIDATE SEAMS IN THIN FILM WILL BE NEEDED TO EVA ...

    SBIR Phase II 1984 Department of DefenseAir Force
  9. COMPOSITE MATERIALS FOR INTERMEDIATE PROTECTIVE CLOTHING

    SBC: MEMBRANE TECHNOLOGY AND RESEARCH, INC.            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of DefenseAir Force
  10. INNOVATIVE HIGH VOLUME PRODUCTION TESTING OF MMIC'S

    SBC: Microwave Monolithics Inc.            Topic: N/A

    EFFICIENT HIGH VOLUME TEST CAPABILITY FOR MONOLITHIC MICROWAVE INTEGRATE CIRCUITS (MMIC'S) IS A VITAL STEP TOWARD HIGH VOLUME DOD SYSTEMS IMPLEMENTATON AND THE REALIZATION OF THE POTENTIAL OF THIS RAPIDLY EMERGING TECHNOLOGY. A DETAILED APPROACH TO DEVELOP COST EFFECTIVE AUTOMATIC TEST PROCEDURES FOR MMIC'S IS PROPOSED TO RADC. DESCRIBED INTHE PROPOSAL ARE (A) DEVELOPMENT OF DESIGN RULES TO INSURE ...

    SBIR Phase II 1984 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government