You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Automation of Analysis Model Creation

    SBC: COMPUTATIONAL SIMULATION SOFTWARE, LLC            Topic: N06T018

    Traditional finite element methods require conversion of a CAD model into an alternate geometric representation called the finite element mesh. Tools like Cubit, developed at Sandia National Laboratories, have greatly reduced the time to mesh. However, it is still expensive to produce a complete analysis and difficult to have that analysis affect the design cycle in a timely manner. Our studies ...

    STTR Phase I 2006 Department of DefenseNavy
  2. A Non-Invasive Method to Functionalize Single Walled Carbon Nanotubes

    SBC: ELTRON RESEARCH & DEVELOPMENT, INCORPORATED            Topic: N06T031

    This Phase I STTR project will further develop our technique for uniformly dispersing single walled carbon nanotubes into polymeric resins. This project will specifically aim to provide them with a mechanism for anchoring themselves to an epoxy matrix during curing in such a way that they are able to accept and absorb an applied load. The successful development of this technology will result in n ...

    STTR Phase I 2006 Department of DefenseNavy
  3. Micro-factory for Miniaturization, Portability and Remote Production

    SBC: QORTEK INC            Topic: N06T030

    The Micro-Factory/Nano-Factory will employ piezoelectric devices to realize a high precision, controllable micro/nano-manipulation fabrication/assembly unit that is self-contained and portable. The low cost unit will incorporate adaptable multipurpose Micro-Piezoelectric Microfabrication Tools, or tools, that can provide the miniaturization and efficiency needed as to meet the needs of commercial ...

    STTR Phase I 2006 Department of DefenseNavy
  4. Non-Destructive Evaluation / Inspection (NDE/NDI) for Aero Turbine Hot Section Castings and Coatings

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: N06T011

    Luna Innovations Incorporated will conduct a feasibility study of a non-linear, ultrasonic, non-destructive method of evaluating heat transfer and structural characterization of gas turbine engine hot section parts. The proposed concept is a novel ultrasonic measurement which will be used to determine change in heat flux for determining heat transfer. An ultrasonic transducer will be used for th ...

    STTR Phase I 2006 Department of DefenseNavy
  5. Power Harvesting for Encrypted Wireless Sensor Clusters

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: N06T020

    There is a great need to decrease the dependence upon traditional batteries in modern miniature devices. Not only do batteries increase the size of ever shrinking components, they also do not provide the operational lifetime that is being demanded of newer components. Alternative power sources need to be able to scavenge ambient power from the environment to be able to provide power for newer ex ...

    STTR Phase I 2006 Department of DefenseNavy
  6. Aircraft Electrical Power System Diagnostics and Health Management

    SBC: GLOBAL STRATEGIC SOLUTIONS LLC            Topic: N06T007

    Prognostics and health management is a critical technology for accurately predicting impending failures and providing a decision process for replacing components before actual failures occur. This is particularly critical in aircraft Electrical Power Systems. Significant gains in maintenance decision making, safety, system availability, productivity, and cost savings, could be realized by the Nav ...

    STTR Phase I 2006 Department of DefenseNavy
  7. STTR Friction Stir Processing for Superplastic Forming

    SBC: HI-TECH WELDING & FORMING, INC.            Topic: N06T038

    Friction stir welding (FSW) is a solid state joining process with unique characteristics that offer opportunities for cost savings, new fabrication methods, and new structural designs. FSW eliminates many of the problems associated with fusion welding techniques. In addition, FSW generates a “stir zone” microstructure that consists of very fine, equiaxed grains that are ideal for post-weld f ...

    STTR Phase I 2006 Department of DefenseNavy
  8. Polymer Based, Thermally Conductive and Erosion Resistant Boot Materials/Concepts for Rotor Blade Leading Edge Protection

    SBC: HONTEK CORP.            Topic: N06T013

    The leading edge of the V-22 rotor blade is made of titanium and nickel abrasion strips bonded to the composite substrate. Although effective for rain erosion protection, nickel and titanium show poor sand erosion resistance. In addition, this metal and composite hybrid configuration limits working strain and fatigue life. This hybrid concept also hampers field serviceability and increases the ...

    STTR Phase I 2006 Department of DefenseNavy
  9. Miniature Electronic Sniffer for Navy Vertical Take off Unmanned Aerial Vehicles (VTUAVs)

    SBC: IONFINITY, LLC            Topic: N06T010

    We propose to jointly develop a miniaturized novel chemical sensor system through a collaborative effort between IonFinity, LLC, NASA’s Jet Propulsion Laboratory, and Imaginative Technologies, LLC. This field portable chemical sensor system consists of 1) a new and powerful detector called a Differential Mobility Spectrometer (DMS) developed by Imaginative Technologies, and 2) a novel “soft-io ...

    STTR Phase I 2006 Department of DefenseNavy
  10. Mid-Infrared Fiber-Optic Switch for IRCM Laser Applications

    SBC: IRFLEX CORP            Topic: N06T039

    Current laser-based infrared countermeasure (IRCM) system integrates a mid-infrared laser with a pointer-tracker (P/T) as a mated pair. The full protection of tactical aircrafts requires six IRCM systems to cover all fields of attack. Today each mid-infrared laser for IRCM costs several hundreds of thousands of dollars, measures about 9 inches x 8 inches x 3 inches, and weighs approximately 10 lbs ...

    STTR Phase I 2006 Department of DefenseNavy
US Flag An Official Website of the United States Government