You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Spectrum Attenuation Reporting Sensor System

    SBC: 0 BASE DESIGN LLC            Topic: AF18BT005

    The Phase 2 development will yield a prototype Cognitive Data Sampling (CDS) system for 2 RF bands to fully demonstrate the capability of the underlying technology. This will include the development of RF antennas, RF signal conditioning for the bands, CDS analog to conversion module and a processor module. The processor module shall be comprised of a Commercial Off-The-Shelf (COTS) module that in ...

    STTR Phase II 2020 Department of DefenseAir Force
  2. Optimization of Sodium Guide Star Return using Polarization and/or Modulation Control

    SBC: ROCHESTER SCIENTIFIC LLC            Topic: AF19AT008

    Laser guide stars (LGS) are artificial sources of light produced by laser-induced fluorescence from sodium atoms in the mesosphere between 85 km and 100 km altitude. The fluorescence can be detected on the ground with a telescope and used as a reference for compensating atmospheric aberrations in astronomical and space observations in conjunction with an adaptive optics system. Sodium LGS are vita ...

    STTR Phase II 2020 Department of DefenseAir Force
  3. Diamond Materials for Quantum Technologies

    SBC: GREAT LAKES CRYSTAL TECHNOLOGIES INC            Topic: AF19CT010

    Great Lakes Crystal Technologies (GLCT) is partnered with Michigan State University (MSU) to develop novel diamond materials for research and evaluation at Air Force Research Laboratory for applications in quantum communications. The technical effort seeks to build upon advanced plasma assisted chemical vapor deposition (CVD) technology licensed by GLCT which was developed at MSU by scientists at ...

    STTR Phase II 2020 Department of DefenseAir Force
  4. Pathogen Classification Tool (PACT)

    SBC: Stottler Henke Associates, Inc.            Topic: ST18C002

    Stottler Henke proposes PACT to address the threat posed by unknown/novel bacteria. Stottler Henke’s solution leverages AI/ML technologies to assess the pathogenic potential of unknown/novel bacteria for DARPA’s Biological Technologies Office. Threat assessment is inferred from phenotype as characterized by a series of assays developed by Harvard University as part of DARPA’s Friend or Foe p ...

    STTR Phase II 2020 Department of DefenseDefense Advanced Research Projects Agency
  5. Visual Relative Navigation

    SBC: TOYON RESEARCH CORPORATION            Topic: ST18C006

    As unmanned aircraft systems (UAS) become more prevalent there is an increasing desire to automate UAS navigation and control. To enable future UASs to perform a wider variety of missions, they must be able to complete autonomous relative navigation to accomplish missions. Current technologies rely heavily on GPS measurements, which are undesirable since GPS signals may be unavailable in many DoD ...

    STTR Phase II 2020 Department of DefenseDefense Advanced Research Projects Agency
  6. Innovative Processing Techniques for Additive Manufacture of 7000 Series Aluminum Alloy Components

    SBC: SENSIGMA LLC            Topic: N18AT005

    Naval aircraft components are routinely made of 7000 series aluminum alloys due to their strength, weight and fatigue properties. Present Additive Manufacturing (AM) processes fall short of producing 7000 series Al alloys successfully due to lack of porosity, and thermal and composition control. In-situ methods implemented to date largely only yield information about the component surface and othe ...

    STTR Phase II 2020 Department of DefenseNavy
  7. Next-Generation, Power-Electronics Materials for Naval Aviation Applications

    SBC: KYMA TECHNOLOGIES, INC.            Topic: N18AT004

    This program will further the development of large area freestanding GaN substrates (150mm or greater) and develop a bulk GaN substrate characterization protocol to help reduce the variability in GaN homoepitaxial growth results which have prevented low cost, high voltage, vertical GaN power devices from being realized in an economically viable way.

    STTR Phase II 2020 Department of DefenseNavy
  8. Comprehensive Surf Zone Modeling Tool

    SBC: Arete Associates            Topic: N19AT010

    The objective of this project is to advance the capabilities of the Coastal Battlefield Reconnaissance and Analysis (COBRA) system by creating a Surf Zone Modelling Tool (SZT) that can create realistic synthetic imagery of the surf zone (SZ). Through the use of this synthetic imagery the COBRA Program will be enabled to inform concept of operations (CONOPS) in unfamiliar environments as well as mo ...

    STTR Phase II 2020 Department of DefenseNavy
  9. Mid-Infrared Laser Absorption Spectroscopy for Multi-Parameter Rotating Detonation Analysis

    SBC: OPTO-KNOWLEDGE SYSTEMS INC            Topic: AF19AT011

    New, innovative laser spectroscopy technology will be developed for performance quantification and combustion characterization in a Rotational Detonation Rocket Engine (RDRE). The effort will push the state of the art in tunable laser absorption spectroscopy to enable fast time response diagnostics of the extreme pressure and temperature conditions of an RDRE.

    STTR Phase II 2020 Department of DefenseAir Force
  10. Positioning and Scaling of the CAVEMAN Human Body Model for Pilot Injury Risk Analysis

    SBC: CORVID TECHNOLOGIES, LLC            Topic: AF19CT010

    The proposed project will develop subject-specific FE models of the head and integrate them with a full body finite element model. The combination of patient-specific head geometries with the generalized body model will provide a platform with which to apply improved boundary conditions for the head and neck, including applied muscle tension and the application of appropriate kinematics of the hea ...

    STTR Phase II 2020 Department of DefenseAir Force
US Flag An Official Website of the United States Government