Award Data

The Phase 2 development will yield a prototype Cognitive Data Sampling (CDS) system for 2 RF bands to fully demonstrate the capability of the underlying technology. This will include the development of RF antennas, RF signal conditioning for the bands, CDS analog to conversion module and a processor module. The processor module shall be comprised of a Commercial Off-The-Shelf (COTS) module that in ...

Laser guide stars (LGS) are artificial sources of light produced by laser-induced fluorescence from sodium atoms in the mesosphere between 85 km and 100 km altitude. The fluorescence can be detected on the ground with a telescope and used as a reference for compensating atmospheric aberrations in astronomical and space observations in conjunction with an adaptive optics system. Sodium LGS are vita ...

Great Lakes Crystal Technologies (GLCT) is partnered with Michigan State University (MSU) to develop novel diamond materials for research and evaluation at Air Force Research Laboratory for applications in quantum communications. The technical effort seeks to build upon advanced plasma assisted chemical vapor deposition (CVD) technology licensed by GLCT which was developed at MSU by scientists at ...

Stottler Henke proposes PACT to address the threat posed by unknown/novel bacteria. Stottler Henke’s solution leverages AI/ML technologies to assess the pathogenic potential of unknown/novel bacteria for DARPA’s Biological Technologies Office. Threat assessment is inferred from phenotype as characterized by a series of assays developed by Harvard University as part of DARPA’s Friend or Foe p ...

As unmanned aircraft systems (UAS) become more prevalent there is an increasing desire to automate UAS navigation and control. To enable future UASs to perform a wider variety of missions, they must be able to complete autonomous relative navigation to accomplish missions. Current technologies rely heavily on GPS measurements, which are undesirable since GPS signals may be unavailable in many DoD ...

Naval aircraft components are routinely made of 7000 series aluminum alloys due to their strength, weight and fatigue properties. Present Additive Manufacturing (AM) processes fall short of producing 7000 series Al alloys successfully due to lack of porosity, and thermal and composition control. In-situ methods implemented to date largely only yield information about the component surface and othe ...

This program will further the development of large area freestanding GaN substrates (150mm or greater) and develop a bulk GaN substrate characterization protocol to help reduce the variability in GaN homoepitaxial growth results which have prevented low cost, high voltage, vertical GaN power devices from being realized in an economically viable way.

The objective of this project is to advance the capabilities of the Coastal Battlefield Reconnaissance and Analysis (COBRA) system by creating a Surf Zone Modelling Tool (SZT) that can create realistic synthetic imagery of the surf zone (SZ). Through the use of this synthetic imagery the COBRA Program will be enabled to inform concept of operations (CONOPS) in unfamiliar environments as well as mo ...

New, innovative laser spectroscopy technology will be developed for performance quantification and combustion characterization in a Rotational Detonation Rocket Engine (RDRE). The effort will push the state of the art in tunable laser absorption spectroscopy to enable fast time response diagnostics of the extreme pressure and temperature conditions of an RDRE.

The proposed project will develop subject-specific FE models of the head and integrate them with a full body finite element model. The combination of patient-specific head geometries with the generalized body model will provide a platform with which to apply improved boundary conditions for the head and neck, including applied muscle tension and the application of appropriate kinematics of the hea ...