Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. FLOW APPLICATIONS

    SBC: U.s. Composites Corp            Topic: N/A

    HIGH PERFORMANCE POROUS MATERIALS ARE NEEDED FOR THE DEVELOPMENT OF LAMINAR FLOW TECHNOLOGY. LAMINAR FLOW CONTROL IN AIRCRAFT COULD PROVIDE FUEL SAVINGS UP TO 20%. IN SUBMERSIBLES, THIS TECHNIQUE WILL REDUCE BOTH DRAG AND RADIATED NOISE. COMPOSITE MATERIALS HAVE ADVANTAGES FOR UNDERSEA SUBMERSIBLES: THEY PROVIDE HIGH STRENGTH, ARE NON-CORRODING, NON-MAGNETIC AND ARE READILY MOLDED. COMPOSITES CAN ...

    SBIR Phase I 1985 Department of DefenseNavy
  2. THIS PROPOSAL DESCRIBES PROCEDURES FOR MEASUREMENT OF ACTUALLOADS DURING FLIGHT OPERATIONS OF NAVY AIRCRAFT BY ATTACHINGTRANSDUCERS TO SENSITIVE COMPONENTS OF THE NOSE AND MAIN LANDING GEAR.

    SBC: Engineering Dynamics Inc.            Topic: N/A

    THIS PROPOSAL DESCRIBES PROCEDURES FOR MEASUREMENT OF ACTUALLOADS DURING FLIGHT OPERATIONS OF NAVY AIRCRAFT BY ATTACHINGTRANSDUCERS TO SENSITIVE COMPONENTS OF THE NOSE AND MAIN LANDING GEAR. STRAIN GAGES ARE THE ANTICIPATED TRANSDUCERS HOWEVER, INDUCTIVE, CAPACITIVE AND OTHER RESISTIVE TRANSDUCERS SHALL BE EVALUATED FOR USE IN THIS SYSTEM. PROCEDURES ARE OUTLINED TO DETERMINE THE OPTIMUM LOCATIONS ...

    SBIR Phase I 1983 Department of DefenseNavy
  3. ENVIRONMENTAL INSTRUMENTS, INC.

    SBC: Environmental Instruments Inc            Topic: N/A

    ENVIRONMENTAL INSTRUMENTS, INC. (EII) PROPOSES TO CONDUCT ADVANCED ENGINEERING DEVELOPMENT OF ITS MODEL 200M SOLID STATE (NO MOVING PARTS) WIND VELOCITY AND WIND DIRECTION MEASUREMENT SYSTEM WITH THE OBJECTIVE OF ADAPTING THE SYSTEM FOR OPERATION IN A NAVAL ENVIRONMENT.THIS ADVANCED ENGINEERING DEVELOPMENT WILL INCLUDE MODIFICATION NECESSARY TO PASS ELECTRO-MAGNETIC INTERFERENCE TESTS, INTERROGATI ...

    SBIR Phase I 1985 Department of DefenseNavy
  4. Cockpit and Helmet Mounted Displays Based on Interferometric

    SBC: Etalon, Inc.            Topic: N/A

    Etalon has recently demonstrated a fundamentally new display technology based on Microelectromechanical (MEM) Structures which affords high performance in harsh environments utilizing low cost, mature process technology. Relying on interference, these interferometric modulators (IMods) are simple membrane structures whose colors change when deformed electrostatically. IMods have already d ...

    SBIR Phase I 1997 Department of DefenseNavy
  5. JP8/Diesel Fueled Motorcycle

    SBC: EVAN GUY ENTERPRISES, INC.            Topic: N/A

    The conversion of a commercially available motorcycle engine from standard fuels to JP8/Diesel Fuel is the technology addressed in this proposal. Current technology off-road motorcycles typically use gasoline powered two or four stroke engines which are not compatible with the future DoD mandated JP8 universal fuel requirement. Qualities required by the propulsion system are bot ...

    SBIR Phase I 1997 Department of DefenseNavy
  6. Fiber Optic Force Transducer for Rocket Fuel Combustion Research

    SBC: Ffpi Industries, Inc.            Topic: N/A

    The Navy's requirements for a high-bandwidth, sensitive transducer for measuring the dynamic force produced by combusting propellant samples will be addressed using a fiber optic design. The transducer proposed here is similar to pressure senso

    SBIR Phase I 1997 Department of DefenseNavy
  7. CAN-TYPE SODA VENDING MACHINES WHICH ARE CURRENTLY USED ON BOARD SHIP REQUIRE VALUABLE STORAGE SPACE FOR THE CANS.

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    CAN-TYPE SODA VENDING MACHINES WHICH ARE CURRENTLY USED ON BOARD SHIP REQUIRE VALUABLE STORAGE SPACE FOR THE CANS. SYRUP/CUP-TYPE MACHINES DO NOT HAVE THIS PROBLEM, BUT THEY DO RESULT IN SPILLAGE WHEN THE SHIP PITCHES OR ROLLS. SPACE IS A VALUABLE COMMODITY ON BOARD SHIPS AND ANY INNOVATION WHICH ADDRESSES THIS PROBLEM AND PRODUCES SODA WITHOUT SPILLAGE WILL BE OF GREAT BENEFIT. FMI'S PROPOSED SOL ...

    SBIR Phase I 1985 Department of DefenseNavy
  8. Nanolaminated Ti/TiN Fretting and Wear Resistant Coating

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    Root attachment areas of turbine blades and vanes experience in which oxide debris is generally formed under the small contact area and cannot escape. This leads to localized wear and defect formation. Generally, soft metal (Cu, Al) are used to allow the small relative motion to be taken up within the coating. Plasma sprayed Cu-Ni-In and Ni-graphite coatings are used currently in the mating a ...

    SBIR Phase I 1997 Department of DefenseNavy
  9. Nonlinear Dynamic Control of Advanced Electric Power Systems

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    Development and simulation is proposed of a control system for multi-input, multi-output nonlinear dynamic power systems. The overall goal will be development of a reliable and survivable power system with optimized steady-state operation, stable and controlled transition between states as a result of a deliberate perturbation, and rapid restoration of electric power after a precipitate pertu ...

    SBIR Phase I 1997 Department of DefenseNavy
  10. Wire Bonding Interconnects for High Temperature SiC Electronics

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    Foster-Miller proposes to develop three new bond wire alloys for use with SiC intergrated circuits operating at temperatures as high as 500 deg C. These alloys will serve as alternatives to aluminum and gold bond-wire, which are unreliable at high temperatures. The alloys will be resistant to creep, corrosion, oxidation, and thermal fatigue. The wire will also be engineered to be easily dra ...

    SBIR Phase I 1997 Department of DefenseNavy
US Flag An Official Website of the United States Government