Award Data

Synthetic scenario-based training of Navy personnel in the use of Navy SIGINT/IO systems has helped to reduce training costs, and it has enabled the personnel to be trained in an environment that sufficiently approximates real-world situations that could not otherwise be accomplished within the class room. However, scenario development is highly complex and involves a great deal of human effo ...

We propose to design a high average power Er:Fiber ultrafast laser system which is pumped at 14xxnm, and at the same time solve other problems related to ultrashort pulses in fiber lasers. The advantage of using 14xxnm pumping is the reduction of the standard quantum defect from 37% to 5%, thus greatly reducing the thermal load on the system, which makes it inherently more efficient. We also inten ...

Aging aircraft commonly suffers from several types of degradation including fatigue cracking and lack of bonding. It is virtually impossible to predict degradation in structural performance or when a component or structure will fail due to the inability to test new material systems under all loading conditions and under all environmental conditions. A material state awareness system using minimali ...

The Phase I deliverable will be a physic-based model which represents a CMC gas turbine component concomitantly at the material level and the structural level. This model will be probabilistically analyzed to account for the uncertainties in material properties and the uncertainties in the size and impact velocities of possible foreign objects (FOD). A ceramic material must display sufficient capa ...

A unique type of air lubricated thrust bearing called a Wave Bearing is proposed to assist a rolling element bearing to carry the thrust load and to improve the bearing’s life when used in a micro gas turbine engine. The Wave Bearing technology will provide improved reliability, safety and life compared to rolling element bearings used alone, as well as to allow simplification of engine design a ...

The realization of materials with record mechanical and electrical properties is of paramount importance to the Air Force and other branches of the US Armed Forces. Layer-by-layer (LBL) assembly is capable of producing nanocomposite materials with record properties surpassing those made by many traditional composite preparation techniques. However the process is time consuming and typically yiel ...

This proposal addresses the need to increase the probability of detection (PD) and reduce the probability of false alarm (PFa) for non-contact, real-time sensors for trace levels of biological and chemical targets using simultaneous detection of Raman and fluorescence emissions. Raman spectroscopy is a spectroscopic method that provides information about molecular bonds in target materials. F ...

Industrial Control Systems (ICS) are critical elements in electrical, water, oil/gas, and manufacturing services involving supervisory control and data acquisition (SCADA), distributed control systems (DCS), and programmable logic controllers (PLCs). These systems allow operators to monitor sensor data and remotely control field devices. Initially, these devices were designed for closed-network or ...

Hypersonic missile defense systems are being designed to reach global threats. During flight, external surfaces are predicted to reach temperatures in excess of 2200C. As a result, innovative, high performance thermal protection systems (TPS) are of great demand. Among ultra-high temperature ceramics (UHTC), it is well known that ZrB2- and HfB2-based materials have high melting temperatures and ...

The demand for higher performance and rapid transition of new technologies into extreme performance has lead to the need for engineered materials and surface modification technologies. The present proposal is focused on finding a surface engineered solution that can withstand exceptionally harsh environments such as those found in supersonic ground test tracks or rail gun environments. This SBIR p ...