You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Temperature Unique Low Thermal Conductivity Thermal Barrier Coating (TBC) Architectures

    SBC: UES INC            Topic: 27c

    Higher operating temperature for the gas turbine engine is needed for enhanced efficiency, lower emission and increased performance goal. The current state-of-the-art thermal barrier coatings (TBCs) are not adequate to provide the needed protection for the metallic components of the turbine engine operating at higher TBC surface temperature (>1300

    STTR Phase I 2010 Department of Energy
  2. High temporal and spatial resolution measurement of hydrometeor mass for automated assessment of precipitation rate and type

    SBC: PARTICLE FLUX ANALYTICS INC            Topic: 07a

    The Particle Flux Analytics Inc. (PFA) Multi Angle Snowake Camera (MASC) has been operating at the DOE Atmospheric Radiation Measurement Oliktok Point site since 2015, providing the Atmospheric Radiation Measurement program community with unprecedented information about hydrometeor shape, size, and fallspeed. However, no technology currently exists for completing the critically needed suite of dat ...

    STTR Phase II 2018 Department of Energy
  3. HPC Application Energy Profiling for Energy Optimization

    SBC: RNET TECHNOLOGIES INC            Topic: 36a

    Energy consumption is quickly becoming one of the primary bottlenecks of compute clusters and supercomputers. The DOE is a primary developer and consumer of these power hungry supercomputers, however smaller cluster machines are also widely used through other government agencies and industries. Yet, there are few power profiling tools that allow application developers transparent insight into the ...

    STTR Phase I 2010 Department of Energy
  4. Improved Capillary Guided Laser Wakefield Accelerators based on Diamond Materials

    SBC: EUCLID TECHLABS, LLC            Topic: 03d

    The laser plasma accelerator (LPA) is a very promising technology for generating gamma rays for the detection of contraband bulk nuclear materials, but is currently limited by the rate at which the beam can be pulsed. Erosion of the capillary plasma channel is the main limiting factor and can be mitigated through the use of artificial diamond to construct the channel. Computational modeling and ...

    STTR Phase II 2013 Department of Energy
  5. Laser Cladding Applied to the Construction of PFCs with Integral Tritium Diffusion Barriers

    SBC: NANOHMICS INC            Topic: 27b

    Selection of the Plasma-Facing Component (PFC) material composition is a primary consideration in future fusion reactor design. The PFC materials must not only withstand the harsh operating conditions of the reactor, but the amount of tritium uptake experienced by the PFC during operation is a significant factor. Proper operation, safety and environmental impact mandate that t ...

    STTR Phase I 2013 Department of Energy
  6. Leveraging the Uintah Computational Framework for Commercial Simulation of Industrial Flares

    SBC: REACTION ENGINEERING INTERNATIONAL            Topic: 17b

    Advanced modeling and simulation software, such as the Uintah Computational Framework (Uintah), has been developed in the US, through significant funding by the Department of Energy Office of Advanced Scientific Computing, but has been underutilized by US industry. We will leverage Uintah for commercial simulation of industrial flares on publicly available HPC facilities, and we will further devel ...

    STTR Phase II 2018 Department of Energy
  7. Low Cost HEA Anode for Distributed Reforming and Prevention of Carbon Deposition in SOFC(18-RD-987)

    SBC: UES SERVICES INC            Topic: 17b

    Direct Internal Reforming Solid Oxide Fuel Cells require an anode material with good catalytic reforming and electrochemical reactivity. Although the current state-of-the-art solid oxide fuel cell anode consisting of nickel and yttrium-stabilized zirconia (Ni-YSZ) has excellent catalytic properties and stability for the H2 oxidation at the usual operation conditions, the use of Ni-YSZ anode with c ...

    STTR Phase II 2018 Department of Energy
  8. Low Cost, Scalable Manufacturing of Microlens Engineered Substrates (MLES) for Enhanced Light Extraction in OLED Devices

    SBC: Sinmat Inc            Topic: 09b

    Solid state lighting is being promoted as the ultimate lamps of future. Though the internal quantum efficiency of OLED devices is almost 100%, external efficiency is a mere 36% mainly because of poor light out-coupling (~40%) from the device. Improvement in light out-coupling to >70% and further reducing the manufacturing cost will rapidly accelerate the commercialization of the OLED technology. T ...

    STTR Phase I 2010 Department of Energy
  9. Medical Device to Assess the Viability of Tissue Prior to Skin Grafting

    SBC: Spectral Md, Inc.            Topic: DHP17A006

    The primary objective of this Phase II proposal is to construct and validate the portable SpectralMD DeepView imaging technology designed previously in Phase I. This device allows surgeons to quickly and objectively assess tissue viability in burn surgery prior to skin grafting. DeepView uses machine learning and multispectral imaging to generate quantitative prognostic images with easily interpre ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  10. Medical Electro-Textile Sensor Simulation

    SBC: LR TECHNOLOGIES, Inc.            Topic: DHP17A001

    In this topic, we plan to design a vital EMF sensor to work under any conditions. The sensor will be integrated with smart clothing and using e-textile materials.

    STTR Phase II 2018 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government