You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. New Paradigms in High Pressure Combustion Dynamics Prediction and Control

    SBC: HYPERCOMP INC            Topic: AF12BT15

    ABSTRACT: Stability phenomena that are of vital interest in liquid rocket motor development involve a confluence of diverse physics and interactions across many system components. Any comprehensive, self-consistent numerical model is burdened by a very large computational mesh, stiff unsteady processes which limit permissible time step, and the need to perform tedious, repeated calculations for a ...

    STTR Phase I 2013 Department of DefenseAir Force
  2. New Paradigms in High Pressure Combustion Dynamics Prediction and Control

    SBC: METACOMP TECHNOLOGIES INC            Topic: AF12BT15

    ABSTRACT: The proposed work aims to build a physics-based rapid turnaround simulation capability for resolving combustion dynamics in liquid rocket engines operating at trans-critical and supercritical flow regimes. The methodology will explore both Reduced-Order Methods and Reduced-Basis Methods as potential candidates for efficient unsteady flow simulation, data storage and retrieval, and data ...

    STTR Phase I 2013 Department of DefenseAir Force
  3. Infrared Metamaterials for Emission Phase Control

    SBC: PLASMONICS INC            Topic: AF10BT30

    ABSTRACT: Under the first phase of the program, Plasmonics Inc. and Sandia National Laboratories investigated a range of surfaces that yield non-Lambertian emission profiles in the thermal infrared. The second phase of this program will further maturate the designs developed in the first phase of the program. With the vast majority of the analytical work complete, focus in the second phase will b ...

    STTR Phase II 2013 Department of DefenseAir Force
  4. Incremental Learning for Robot Sensing and Control

    SBC: Net-Scale Technologies, Inc.            Topic: A09AT030

    The purpose of this proposal is to build a working prototype of a highly-adaptive, vehicle-independent, compact, low-power, low-cost, autonomous ground robot navigation system that incorporates the results obtained in our Phase I effort and in our earlier DARPA LAGR (Learning Applied to Ground Robots) work. The system will be able to quickly and automatically adapt to changing environments in real ...

    STTR Phase II 2013 Department of DefenseArmy
  5. Improve pyrotechnic smoke formulations that produce low flame

    SBC: POLARIS SENSOR TECHNOLOGIES INC            Topic: A11aT026

    The objective of this research is to develop materials that replace the current generation of visible smoke formulations used by the U.S. military. In particular the materials must produce low or no flame so that they don't present a fire hazard, have relatively low toxicity, and are efficient. The efficiency is defined in a figure of merit that combines fill factor, yield factor, extinctio ...

    STTR Phase II 2013 Department of DefenseArmy
  6. Plasmonic MEMS Sensor Array

    SBC: Five Stones Research Corporation            Topic: A10aT002

    Sensor development researchers and engineers have perpetually sought novel methods to reduce sensor size and improve performance. Continued miniaturization of sensors through micromachining has enabled novel applications and introduced new paradigms for engineered systems to interact with the world. The challenge has always been to improve performance while continually reducing size. In the curren ...

    STTR Phase II 2013 Department of DefenseArmy
  7. Aerosol Jet Printing of Single-Wall Carbon Nanotube Transistors on Plastic Substrate

    SBC: OPTOMEC, INC.            Topic: AF09BT26

    ABSTRACT: The goal of this phase II proposal is to develop a commercial platform for printing high performance, single-walled carbon nanotube transistor circuits on large-area plastic substrate. Automated processes will be developed for the room temperature printing of metal, semiconductor, and dielectric materials with micron-scale alignment accuracy. The transistor performance will be enha ...

    STTR Phase II 2013 Department of DefenseAir Force
  8. Compact, Rugged, and Low-Cost Wavelength-Versatile Burst Laser

    SBC: Performance Lasers            Topic: A11aT009

    Current of the shelf commercial laser systems that are used for LIBS and other optical detection techniques are too costly, large, low performance and unreliable. The reason for it is because commercial laser systems are designed for continuous operation. Only one or few laser pulses are needed for detection, therefore, low cost burst lasers with the proper parameters are needed. Burst mode operat ...

    STTR Phase II 2013 Department of DefenseArmy
  9. MOCVD of High Performance Complex Oxide Films for Switchable Film Bulk Acoustic Resonators

    SBC: STRUCTURED MATERIALS INDUSTRIES, INC.            Topic: A11aT016

    In this STTR program, Structured Materials Industries, Inc. (SMI) and partners are developing high efficiency, switchable RF filters. The technical approach is based on thin films of paraelectric BaxSr1-xTiO3 and SrTiO3, which can show piezoelectric behavior under an applied DC bias. When integrated into resonator structures, these materials can act as both an RF filter and an RF switch. Combin ...

    STTR Phase II 2013 Department of DefenseArmy
  10. High Fidelity Obscurant Modeling for Sensor Simulations

    SBC: SIMULATION TECHNOLOGIES, INC            Topic: A11aT004

    A technique that enables new methods of obscurant modeling with faster rendering while maintaining or improving physical fidelity is proposed. The proposed technique not only exhibits the statistics of voxel based obscurants, but matches real-world data as well. The main objective from Phase II efforts will be a further refinement of the flow field and particle technique of generating physically c ...

    STTR Phase II 2013 Department of DefenseArmy
US Flag An Official Website of the United States Government